Tarby® Century III TL6 Pump Parts
ACCA replacement parts engineered to fit the Tarby® Century III TL6.
TL6 supports one-, two- and three-stage pumping-element configurations. Match the complete stage and material designation before selecting replacement components.
Century III TL6 Replacement Parts
The verified TL6 range includes multiple rotor and stator stage combinations plus connecting-rod and bearing kits. The table below keeps the Tarby® identification number beside the single ACCA replacement number.
| Tarby® Part Number | Description | Configuration | ACCA Part Number |
|---|---|---|---|
| 400-32BDAA | Stator | 1TL6 CDQ | A-C4106Q |
| 400-32ABAA | Stator | 1TL6 SSQ | A-C5106Q |
| 400-32BDBA | Stator | 2TL6 CDQ | A-C4206Q |
| 400-32ABBA | Stator | 2TL6 SSQ | A-C5206Q |
| 400-32BDCA | Stator | 3TL6 CDQ | A-C4306Q |
| 400-32ABCA | Stator | 3TL6 SSQ | A-C5306Q |
| 700-32BAAA | Rotor | 1TL6 CD | A-C71061 |
| 700-32BBAA | Rotor | 1TL6 SS | A-C81061 |
| 700-32BABA | Rotor | 2TL6 CD | A-C72061 |
| 700-32BBBA | Rotor | 2TL6 SS | A-C82061 |
| 700-32BACA | Rotor | 3TL6 CD | A-C73061 |
| 700-32BBCA | Rotor | 3TL6 SS | A-C83061 |
| 250-32BAAK | Connecting Rod Kit | TL6 CD | A-K0625D |
| 250-32BBAK | Connecting Rod Kit | TL6 SS | A-K0625S |
| 291-32BBAK | Bearing Kit | TL6 | A-K06291 |
Why TL6 Requires the Full Configuration
Three Stage Counts
TL6 is represented in 1TL6, 2TL6 and 3TL6 pumping-element configurations. Each stage count has its own rotor and stator identification rather than one universal TL6 element.
Cast or Stainless
Every published TL6 stage has separate cast and stainless pumping-element entries. Material and stage count should therefore be confirmed together.
Maintenance Kits
The verified service range includes cast and stainless connecting-rod kits plus a TL6 bearing kit, useful when the repair extends into the pin-joint or drive end.
Century III TL6 Published Dimensions
The published Century III dimensional data confirms the same 1TL6, 2TL6 and 3TL6 stage progression represented by the verified replacement pumping elements above.
| Configuration | Overall L | S Dimension | Suction | Discharge |
|---|---|---|---|---|
| 1TL6 | 39.06 in | 17.68 in | 3.00 in | 2.50 NPT |
| 2TL6 | 49.69 in | 28.31 in | 3.00 in | 2.50 NPT |
| 3TL6 | 60.31 in | 38.93 in | 3.00 in | 2.50 NPT |
Historical Century III dimensional data. Verify dimensions against the installed pump before fabrication or installation work.
Identifying the Correct TL6 Component
Send the complete Century III TL6 model designation, the existing part number when available, and a nameplate or component photo. Stage count and material designation are especially important on TL6 rotor and stator selections.
Related Century III Models
Need a Century III TL6 Replacement Part?
Send your pump identification and required component to ACCA Pumps for review.
Trademark Disclaimer: Tarby® is a trademark of its respective owner. References are used solely for identification and fitment purposes. ACCA Pumps is an independent aftermarket manufacturer.