Tarby® Century III TL10 Pump Parts
ACCA replacement drive, sealing and rotor components engineered to fit Century III TL10 pumps.
TL10 service records include multiple rotor conditions plus stainless drive and sealing components. Match the description to the existing assembly before ordering.
Century III TL10 Replacement Parts
| Tarby® Part Number | Description | Configuration | ACCA Part Number |
|---|---|---|---|
| 250-34BBYAA | Connecting Rod | TL10 SS316 | A-B1025S |
| 261-34BBYAA | Drive Shaft | TL10 SS316 | A-B10266 |
| 371-34ADC | Pump Support | TL10 | A-A10371 |
| 450-34BBYAA | Rotor Pin | TL10 316SS | A-B1045S |
| 650-34BBYAA | Packing Washer | TL10 SS316 | A-B1065S |
| 700-34BAAB | Rotor | 1TL10 CD undersize | A-C71103 |
| 700-34BABB | Rotor | 2TL10 CD undersize | A-C72103 |
| 700-34BABF | Rotor | 2TL10 CD oversize | A-C72105 |
| 700-34BACB | Rotor | 3TL10 CD undersize | A-C73103 |
| 700-34BBCB | Rotor | 3TL10 SS undersize | A-C83103 |
| 880-34BBAA | Grit Seal | TL10 SS | A-B1088S |
TL10 Parts That Need Extra Identification
Rotor Sizing
The verified TL10 records include undersize and oversize rotors as well as one-, two- and three-stage designations. Rotor condition is therefore part of the part identification, not just the TL10 size.
Stainless Drive Components
Published TL10 drive-end coverage includes a 316 stainless connecting rod, drive shaft and rotor pin. The material should be confirmed before these parts are quoted.
Sealing Components
The verified list includes a stainless packing washer and grit seal, giving TL10 service coverage beyond the pumping elements and drive train.
Century III TL10 Published Dimensions
The historical engineering table documents 1TL10, 2TL10 and 3TL10 configurations. All three share the same published suction and discharge sizes, while overall pump length increases with stage configuration.
| Configuration | Overall L | S Dimension | Suction | Discharge |
|---|---|---|---|---|
| 1TL10 | 52.94 in | 21.81 in | 6.00 in | 5.00 NPT |
| 2TL10 | 63.31 in | 32.19 in | 6.00 in | 5.00 NPT |
| 3TL10 | 73.75 in | 42.63 in | 6.00 in | 5.00 NPT |
Historical Century III dimensional data. Verify dimensions against the installed pump before fabrication or installation work.
TL10 Rotor and Drive-End Selection
Undersize and oversize rotor descriptions are not interchangeable. Send the complete model and existing component identification so ACCA can verify the required TL10 replacement.
Related Century III Models
Need a Century III TL10 Part?
Trademark Disclaimer: Tarby® is a trademark of its respective owner. ACCA Pumps is an independent aftermarket manufacturer.