Seepex® CS Food and Hygienic Pump Parts
Model-based replacement rotors, stators, flexrod and pin-joint components, shafts, seals and related wear parts for supported Seepex® CS-family pumps.
Food and hygienic constructions require confirmation of the complete model, product-contact materials, joint design, sealing arrangement and cleaning requirements before replacement selection.
Replacement Parts for Seepex® Food and Hygienic Pumps
Seepex® CS-family progressive cavity pumps are designed for applications where cleanability, product integrity and hygienic construction are important. Equipment variants use different drive-joint arrangements, product-contact materials, seals, connections and cleaning provisions.
Replacement selection therefore requires more than the nominal pumping-element size. The complete model, joint design, rotor and stator geometry, surface requirements, elastomer, seal arrangement and process connection details must be confirmed.
ACCA reviews supported CS-family components using the complete model, part description, photographs, dimensions and application requirements. Any sanitary, food-contact or certification requirement must be stated and confirmed for the exact replacement being quoted.
Seepex® CS Food and Hygienic Pump Families
The CS range includes flexrod and pin-joint constructions as well as hygienic hopper equipment. ACCA evaluates supply and fit for the specific model and required component.
BCF
Hygienic food-pump construction using flexrod technology in the drive train.
BCFH
EHEDG-certified pump-family construction intended for demanding hygienic service.
BCSO
Hygienic progressive cavity pump construction using open pin joints.
BCSB
Food and hygienic pump construction using closed pin joints.
BTCS
Hygienic hopper-pump construction for products requiring assisted feed into the pumping element.
CS Replacement Components
Rotors
Replacement rotors reviewed for model, pumping-element geometry, product-contact material, finish and dimensions.
Stators
Replacement stators selected around model, geometry, elastomer, product, temperature and cleaning chemistry.
Flexrod Components
Supported BCF and BCFH drive components evaluated from the complete model, construction and dimensions.
Pin-Joint Components
Pins, bushings, sleeves, seals and related open- or closed-joint components for supported constructions.
Drive Shafts
Replacement shafts confirmed from model, connection, material, surface and seal-interface dimensions.
Mechanical Seals
Seal components reviewed for installed arrangement, product, cleaning method, temperature and pressure.
Feed Screws
BTCS feed components evaluated using complete model, geometry, dimensions and product-contact requirements.
Gaskets and Elastomer Parts
Product-contact elastomer components selected around fluid chemistry, temperature and cleaning agents.
Special and Legacy Parts
Uncommon components evaluated using photographs, measurements, drawings or physical samples.
Food and Hygienic Component Selection
| Selection Item | Information Needed | Why It Matters |
|---|---|---|
| Complete CS model | Every letter, number and suffix | Distinguishes flexrod, open-joint, closed-joint and hopper constructions |
| Product-contact requirements | Metal grade, surface requirement, elastomer and applicable approval | Supports compatibility with the product and process requirements |
| Cleaning process | CIP, manual cleaning, cleaning chemicals, temperature and cycle | Affects elastomer, seal and surface-material selection |
| Joint construction | Flexrod, open pin joint, closed pin joint or hopper/feed arrangement | Determines compatible drive and wear components |
| Seal arrangement | Photographs, dimensions, materials and operating conditions | Separates sealing configurations and product-contact requirements |
| Process product | Ingredients, viscosity, solids, temperature and sensitivity | Supports rotor, stator, seal and cleaning review |
How to Request Seepex® CS Parts
Provide the complete BCF, BCFH, BCSO, BCSB or BTCS designation.
State whether the request is for a rotor, stator, joint item, shaft, seal, feed screw or another part.
List food-contact, surface-finish, material, cleaning and certification requirements applicable to the replacement.
Include overall views, connections, joint details, sealing surfaces and critical measurements.
Provide ingredients, viscosity, solids, temperature, pressure, speed and cleaning chemistry.
Typical Food and Hygienic Applications
Dairy Products
Milk concentrates, yogurt, cream, curds and other viscous or shear-sensitive dairy products.
Sauces and Condiments
Sauces, dressings, pastes and products containing soft solids or particulates.
Fruit and Vegetable Products
Purees, concentrates, pulps and products containing fibers or soft solids.
Beverage Ingredients
Syrups, concentrates, flavorings and dosing streams requiring controlled transfer.
Pharmaceutical and Cosmetics
Creams, gels and process products where construction and cleaning requirements are confirmed.
Hygienic Hopper Service
Viscous or non-flowing food products requiring assisted feed through a hygienic hopper construction.
BTCS Hygienic Hopper Parts
BTCS belongs to the food and hygienic equipment group but also uses a hopper and feed arrangement. Its pumping-element, feed-screw and hopper-related components require both hygienic-service review and dimensional confirmation.
Frequently Asked Questions
What information identifies a Seepex® CS replacement part?
Send the complete model, component required, photographs, dimensions, product-contact material requirements and cleaning conditions.
Are BCF, BCFH, BCSO and BCSB parts interchangeable?
Do not assume interchangeability. These families use different drive-joint constructions and may differ in materials, seals, connections and hygienic requirements.
What CS-family parts can ACCA supply?
Supported components may include rotors, stators, flexrod or pin-joint components, drive shafts, seals, elastomer parts, feed screws and other wear items.
Does every ACCA replacement automatically carry the pump family’s hygienic certification?
No. Any required food-contact approval, surface finish or certification must be stated and explicitly confirmed for the exact replacement quoted.
How is a stator elastomer selected for food service?
Selection should consider the complete product, temperature, fat or oil content, cleaning chemicals, sanitation temperature, pressure and required approvals.
Can ACCA review a special or obsolete hygienic component?
Yes, when sufficient photographs, measurements, drawings or a physical sample are available and the required materials and approvals are clearly defined.
Return to the Seepex® Pump Parts hub for BN standard pumps, MD metering pumps, BT hopper pumps, and special or legacy equipment.
Request Seepex® Food and Hygienic Pump Parts
Send the complete model, component required, photographs, dimensions and applicable product-contact requirements. ACCA will review what is needed to confirm a supported replacement.
Complete CS-family model
Component required
Photographs and dimensions
Product-contact requirements
Cleaning and process details
Pump-family construction
Joint and seal arrangement
Dimensional requirements
Material and approval needs
Quotation requirements
Trademark Disclaimer: Seepex® is a registered trademark of its respective owner. References to Seepex® are used solely to identify compatible equipment. ACCA Pumps is an independent aftermarket manufacturer and is not affiliated with or endorsed by the trademark owner. Read the full disclaimer.