Moyno® L2 Pump Parts
OEM-compatible replacement parts for the L2 Drive End and supported 1L2, 2L2 and 3L2 pump frames.
This page organizes bearings, seals, pin-joint components, connecting rods, drive shafts, packing components, rotors and stators using the original L2 Drive End parts structure.
L2 Drive End Engineering Overview
The original L2 Drive End documentation covers frame sizes 1L2, 2L2 and 3L2, along with 2M1, 3M1 and 6M1 configurations that use the same drive-end family. In the frame designation, the first number identifies the number of pumping stages, the letter identifies the model relationship, and the final number identifies the rotor-stator element size.
Pin-Joint Drive Train
The L2 transmits torque through the drive shaft, shaft pin, connecting rod, rotor pin and retaining hardware. These mating parts should be inspected together during overhaul.
Nameplate Identification
Use the complete frame size, type designation, serial number and trim code when selecting parts. Material and sealing variations can change the applicable part number.
Rotor and Stator by Frame
Drive-end parts are selected by type designation, while the proper rotor and stator are selected by frame size.
L2 Engineering Data
| Engineering Data | Specification |
|---|---|
| Pump Family | Moyno® L and J Frame |
| Drive End | L2 |
| L2 Frames Covered Here | 1L2, 2L2, 3L2 |
| Related M-Frame Configurations | 2M1, 3M1, 6M1 |
| Joint Design | Pin joint |
| Type-Designation Families | CD-, CS- and SS- groups; stator material identified by the third letter |
Commonly Stocked L2 Replacement Parts
These components are commonly stocked or regularly manufactured for supported Moyno® L2 L-Frame pumps. Inventory changes daily; contact ACCA Pumps to confirm current availability and lead time.
Rotor
Commonly Stocked
OEM-compatible rotors for supported configurations; material and finish vary by application.
Stator
Commonly Stocked
Replacement stators in application-appropriate elastomer and construction options.
Bearing Kit
Commonly Stocked
Drive-end bearing service components for planned maintenance and rebuilds.
Pin Joint Components
Commonly Stocked
Pins, retainers, connecting-rod hardware and related drive-train components.
Drive Shaft
Commonly Stocked
OEM-compatible replacement drive shafts for supported L-Frame configurations.
Packing Components
Commonly Stocked
Packing, lantern-ring and stuffing-box service components where applicable.
Mechanical Seals
Available on Request
Seal selection depends on pump model, shaft arrangement and process requirements.
Complete Replacement Pumps
Built to Order
Complete OEM-compatible progressive cavity pump assemblies for supported installations.
If your pump is down, send the complete model, serial number and OEM part number when available. ACCA can help confirm the correct replacement and discuss current availability or expedited shipment options.
Before You Order L2 Parts
Record the frame size, type designation, serial number and trim code. The source parts list directs users to select drive-end parts by type designation and the rotor and stator by frame size.
Supported L2 Frame Configurations
Related 2M1, 3M1 and 6M1 configurations use the common L2 drive-end family.
L2 Drive End Replacement Parts
Use the pump type designation to select the applicable material group. ACCA part numbers follow the catalog convention of adding the A- prefix to the OEM part number.
| Ref. | Component Description | ACCA Part Number | OEM Part Number | Notes / Applicable Types |
|---|---|---|---|---|
| A | Ball Bearing (Radial) | A-A02291 | A02291 | All listed type groups |
| B | Ball Bearing (Thrust) | A-A02301 | A02301 | All listed type groups |
| C | Bearing Spacer | A-A02331 | A02331 | All listed type groups |
| D | Bearing Lock Nut | A-A02581 | A02581 | All listed type groups |
| E | Bearing Lock Washer | A-A02591 | A02591 | All listed type groups |
| F | Grease Seal (Radial) | A-A02611 | A02611 | All listed type groups |
| G | Grease Seal (Thrust) | A-A02621 | A02621 | All listed type groups |
| H | Bearing Cover Plate | A-A02341 | A02341 | All listed type groups |
| I | Body Support | A-A02371 | A02371 | All listed type groups |
| J | Shaft Collar | A-A02491 | A02491 | All listed type groups |
| K | Pin Retainer | A-A02501 | A02501 | All listed type groups |
| L | Stator Support | A-A02381 | A02381 | CDQ/CDR/CDB/CDF; CSQ/CSR/CSB/CSF; SSQ/SSR/SSB/SSF |
| L | Stator Support | A-A02382 | A02382 | CDD/CDG/CDT; CSD/CSG/CST; SSD/SSG/SST |
| M | Lantern Ring | A-A02571 | A02571 | All listed type groups |
| N | Drive Pin Retaining Nut | A-A02541 | A02541 | All listed type groups |
| O | Retaining Nut Washer | A-A02731 | A02731 | All listed type groups |
| P | Connecting Rod Washer | A-A02531 | A02531 | CDQ/CDR/CDB/CDF; CSQ/CSR/CSB/CSF; SSQ/SSR/SSB/SSF |
| Q | Connecting Rod | A-B0225D | B0225D | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| Q | Connecting Rod | A-B0225S | B0225S | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| R | Rotor Pin | A-B0245D | B0245D | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| R | Rotor Pin | A-B0245S | B0245S | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| S | Shaft Pin | A-B0246S | B0246S | All listed type groups |
| T | Bearing Housing | A-A02051 | A02051 | All listed type groups |
| V | Drive Shaft | A-B02261 | B02261 | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| V | Drive Shaft | A-B02266 | B02266 | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| W | Packing Gland | A-B0241D | B0241D | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| W | Packing Gland | A-B0241S | B0241S | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| X | Packing | A-B02421 | B02421 | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| X | Packing | A-B02425 | B02425 | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| Y | Packing Washer | A-B0265D | B0265D | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| Y | Packing Washer | A-B0265S | B0265S | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
L2 Repair Kits
Repair kits group commonly serviced components for planned drive-end maintenance. Confirm the complete pump model and material configuration before ordering.
| Kit Description | ACCA Part Number | OEM Part Number | Includes / Notes |
|---|---|---|---|
| Bearing Kit | A-K02291 | K02291 | Bearing service kit for the L2 drive-end family. Confirm exact contents for the pump configuration. |
| Connecting Rod Kit — Carbon / Alloy Steel | A-K0225D | K0225D | Connecting-rod and pin-joint service kit for applicable D-material type designations. |
| Connecting Rod Kit — Stainless Steel | A-K0225S | K0225S | Connecting-rod and pin-joint service kit for applicable S-material type designations. |
L2 Rotor Part Numbers
| Frame | ACCA Rotor | OEM Rotor | Applicable Type Designations |
|---|---|---|---|
| 1L2 | A-C71021 | C71021 | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| 1L2 | A-C81021 | C81021 | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| 2L2 | A-C72021 | C72021 | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| 2L2 | A-C82021 | C82021 | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
| 3L2 | A-C73021 | C73021 | CDQ/CDR/CDB/CDF; CDD/CDG/CDT |
| 3L2 | A-C83021 | C83021 | CSQ/CSR/CSB/CSF; CSD/CSG/CST; SSQ/SSR/SSB/SSF; SSD/SSG/SST |
L2 Stator Part Numbers
Complete stator part numbers are listed below with the elastomer suffix included so maintenance and purchasing teams can cross-reference the exact OEM number.
| Frame | ACCA Stator | OEM Stator | Elastomer |
|---|---|---|---|
| 1L2 | A-C4102Q | C4102Q | Nitrile (NBR) |
| 1L2 | A-C4102R | C4102R | Natural Rubber |
| 1L2 | A-C4102B | C4102B | EPDM |
| 1L2 | A-C4102F | C4102F | Fluoroelastomer (FKM) |
| 1L2 | A-C5102Q | C5102Q | Nitrile (NBR) |
| 1L2 | A-C5102R | C5102R | Natural Rubber |
| 1L2 | A-C5102B | C5102B | EPDM |
| 1L2 | A-C5102F | C5102F | Fluoroelastomer (FKM) |
| 2L2 | A-C4202Q | C4202Q | Nitrile (NBR) |
| 2L2 | A-C4202R | C4202R | Natural Rubber |
| 2L2 | A-C4202B | C4202B | EPDM |
| 2L2 | A-C4202F | C4202F | Fluoroelastomer (FKM) |
| 2L2 | A-C5202Q | C5202Q | Nitrile (NBR) |
| 2L2 | A-C5202R | C5202R | Natural Rubber |
| 2L2 | A-C5202B | C5202B | EPDM |
| 2L2 | A-C5202F | C5202F | Fluoroelastomer (FKM) |
| 3L2 | A-C4302Q | C4302Q | Nitrile (NBR) |
| 3L2 | A-C4302R | C4302R | Natural Rubber |
| 3L2 | A-C4302B | C4302B | EPDM |
| 3L2 | A-C4302F | C4302F | Fluoroelastomer (FKM) |
| 3L2 | A-C5302Q | C5302Q | Nitrile (NBR) |
| 3L2 | A-C5302R | C5302R | Natural Rubber |
| 3L2 | A-C5302B | C5302B | EPDM |
| 3L2 | A-C5302F | C5302F | Fluoroelastomer (FKM) |
Standard Stator Material Suffixes
| Suffix | Standard Elastomer |
|---|---|
| Q | Nitrile (NBR) |
| R | Natural Rubber |
| B | EPDM |
| F | Fluoroelastomer (FKM) |
Advanced Elastomer Engineering for Progressive Cavity Pumps
Every application is different, and the standard elastomer may not always be the best choice.
In addition to OEM-equivalent elastomer compounds, ACCA Pumps can manufacture stators using specialized elastomers engineered for specific operating conditions. Application-specific material selection can help improve chemical compatibility, wear resistance, service life and overall progressive cavity pump performance.
Abrasive & Solids-Bearing Service
Material options can be evaluated for wastewater sludge, mining slurries and other abrasive process streams.
Chemical Compatibility
Stator compounds can be selected around acids, caustics, hydrocarbons, polymers and other challenging process fluids.
Temperature & Process Conditions
ACCA can review fluid temperature, operating pressure and process conditions when recommending an elastomer solution.
Contact ACCA Pumps with the process fluid, operating temperature, pressure and pump model. Our engineering team can recommend a stator material for the specific application.
L2 Part Identification Workflow
Maintenance Recommendations for the L2 Drive End
Replace Grease Seals With Bearing Service
When the drive shaft or bearings are replaced, inspect both grease seals and replace them as part of the bearing-service scope when appropriate.
Inspect Both Pin Joints
Check the shaft pin, rotor pin, retaining hardware, connecting rod ends and mating bores for wear before reassembly.
Verify Packing Arrangement
Record the packing gland, packing, lantern ring and packing washer arrangement before disassembly.
Protect Stator Threads
Use the appropriate thread treatment for the stator sleeve material and apply installation force near the suction-housing end.
Use Compatible Assembly Lubricant
Lubricate the rotor during stator installation only with a lubricant compatible with the stator material.
Never Start the Pump Dry
Fill the pump with process fluid before startup and verify the discharge path is unrestricted.
Frequently Asked Questions
Which pump frames use the L2 Drive End?
The source L2 Drive End manual covers 1L2, 2L2, 3L2, 2M1, 3M1 and 6M1. This page focuses on 1L2, 2L2 and 3L2.
How do I identify the correct L2 replacement part?
Use the complete frame size, type designation, serial number and trim code. Drive-end parts are selected by type designation, while rotor and stator are selected by frame size.
What does the first number in 2L2 mean?
It identifies the number of pumping stages. A 2L2 uses two stages of size-2 pumping elements.
Are L2 bearing and connecting-rod kits available?
The source parts list identifies bearing kit K02291 and connecting-rod kits K0225D or K0225S depending on type designation.
How is the L2 stator part number completed?
Add the third letter of the pump type designation to the basic stator part number shown in the source catalog.
What should I send ACCA for an L2 quotation?
Send frame size, type designation, serial number, trim code, OEM part number when available, quantity and clear photographs.
Browse All Moyno L-Frame Models
Why Choose ACCA L2 Replacement Parts?
OEM-Compatible Fit
Replacement components are selected for dimensional interchangeability with supported Moyno® L2 configurations.
Quality Materials
Material and elastomer options can be reviewed against the actual fluid, wear conditions and operating environment.
Engineering Support
ACCA can help identify parts from the model, serial number, OEM part number, nameplate photographs or existing components.
Fast Quotations
Clear model and part information helps our team provide a faster, more accurate replacement-parts quotation.
Stock & Expedited Options
Common wear items are frequently stocked or regularly manufactured. Current availability is confirmed at quotation.
Worldwide Support
ACCA supports industrial maintenance and purchasing teams in the United States and international markets.
Need Help Identifying Moyno L2 Parts?
Send the complete pump frame, type designation, serial number, trim code and OEM part number when available.
Trademark Disclaimer: Moyno® is a registered trademark of its respective owner. References are used solely to identify compatible equipment and replacement applications. ACCA Pumps is an independent aftermarket manufacturer and is not affiliated with or endorsed by the trademark owner.