Moyno® 367 Pump Parts
OEM-compatible replacement components and part-number cross-references for supported Moyno® 367 progressive cavity pumps.
ACCA Pumps organizes 367 rotors, stators, flexible joints, drive shafts, bearings, sealing components and service hardware using the OEM 500 Series service structure.

367 Engineering Overview
The 367 is part of the Moyno® 500 Series 300-model family. It uses a flexible joint to transmit torque between the drive shaft and rotor while accommodating eccentric rotor motion. Model 36701 uses a rotor pin and shaft pin to secure the flexible joint connections. These pins are included in the 367 elastomer repair/conversion kit structure.
Flexible-Joint Drive
Inspect the shaft, flexible joint and rotor together during overhaul because wear in one component can affect adjacent drive-train parts.
Model Identification
Use the complete model suffix and serial number. Material and sealing variations can change the applicable OEM part number.
Rotor & Stator Selection
The 367 uses model-specific rotor and stator part numbers listed in the OEM service documentation.
367 Engineering Data
| Engineering Data | Specification |
|---|---|
| Pump Family | Moyno® 500 Series |
| Base Model | 367 |
| Joint Design | Flexible joint |
| Suction Port | 2 in NPT |
| Discharge Port | 2 in NPT |
| Maximum Discharge Pressure | 50 PSI |
| Maximum Speed | 1750 RPM |
| Stator Elastomers Listed | NBR, EPDM, FPM |
| Nylon Configurations | Excluded from ACCA 500 Series catalog |
Moyno 367 Replacement Parts Reference
ACCA part numbers use the OEM part number with an A- prefix. The table preserves model and material distinctions from the OEM service documentation; nylon-specific components are omitted.
| Ref. | Component Description | ACCA Part Number | OEM Part Number | Notes / Applicable Types |
|---|---|---|---|---|
| 1 | Pump Body – Cast Iron | A-350-0423-000 | 350-0423-000 | 36701 |
| 1 | Pump Body – 316 SS | A-350-0423-007 | 350-0423-007 | 36704 |
| 2 | Suction Housing – Cast Iron | A-350-0302-000 | 350-0302-000 | 36701 |
| 2 | Suction Housing – 316 SS | A-350-0302-007 | 350-0302-007 | 36704 |
| 21 | Stator – NBR | A-340-3506-120 | 340-3506-120 | 367 |
| 21 | Stator – EPDM | A-340-3506-320 | 340-3506-320 | 367 |
| 21 | Stator – FPM | A-340-3506-520 | 340-3506-520 | 367 |
| 22 | Rotor – 416 Stainless Steel | A-330-2042-000 | 330-2042-000 | 367 |
| 22 | Rotor – 316 Stainless Steel | A-330-3077-000 | 330-3077-000 | 367 |
| 24 | Flexible Joint – Carbon Steel / NBR | A-320-1749-000 | 320-1749-000 | 367 |
| 24 | Flexible Joint – 316 SS / NBR | A-320-4436-000 | 320-4436-000 | 367 |
| 24 | Flexible Joint – Carbon Steel / EPDM | A-320-6378-000 | 320-6378-000 | 367 |
| 24 | Flexible Joint – Carbon Steel / FPM | A-3206515-000 | 3206515-000 | 367 |
| 26 | Drive Shaft – 36701 – 416 Stainless Steel | A-330-1805-000 | 330-1805-000 | 367 |
| 26 | Drive Shaft – 36704 – 316 Stainless Steel | A-330-1805-015 | 330-1805-015 | 367 |
| 29 | Bearing (2 required) | A-630-0552-061 | 630-0552-061 | 367 |
| 45 | Rotor Pin | A-320-4439-002 | 320-4439-002 | 36701 |
| 46 | Shaft Pin | A-320-4439-001 | 320-4439-001 | 36701 |
| 66 | Snap Ring | A-320-2794-000 | 320-2794-000 | 367 |
| 69 | Mechanical Seal – NBR | A-320-1750-000 | 320-1750-000 | 367 |
| 69 | Mechanical Seal – EPDM | A-320-6390-000 | 320-6390-000 | 367 conversion |
| 69 | Mechanical Seal – FPM | A-320-6517-000 | 320-6517-000 | 367 conversion |
| 77 | Slinger Ring | A-320-6385-000 | 320-6385-000 | 367 |
| 112 | Screws (6 required) | A-619-1530-161 | 619-1530-161 | 367 |
| 261 | Pipe Plug | A-610-0120-011 | 610-0120-011 | 36701 |
| 261 | Pipe Plug | A-610-0420-010 | 610-0420-010 | 36704 |
| KIT | Elastomer Repair / Conversion Kit – NBR | A-311-9060-000 | 311-9060-000 | 367 |
| KIT | Elastomer Repair / Conversion Kit – EPDM | A-311-9036-000 | 311-9036-000 | 367 |
| KIT | Elastomer Repair / Conversion Kit – FPM | A-311-9124-000 | 311-9124-000 | 367 |
367 Repair and Conversion Kits
| Configuration / Elastomer | ACCA Kit Number | OEM Kit Number |
|---|---|---|
| NBR | A-311-9060-000 | 311-9060-000 |
| EPDM | A-311-9036-000 | 311-9036-000 |
| FPM | A-311-9124-000 | 311-9124-000 |
500 Series Internal Construction

Service as an Assembly
During overhaul, inspect the rotor, stator, flexible joint, shaft, bearings and sealing components for coordinated wear.
Related 500 Series Models
Need Help Identifying Moyno 367 Parts?
Send the complete pump model, serial number and OEM part number when available.
Trademark Disclaimer: Moyno® is a registered trademark of its respective owner. References are used solely to identify compatible equipment and replacement applications. ACCA Pumps is an independent aftermarket manufacturer and is not affiliated with or endorsed by the trademark owner.
Complete 367 Replacement Pump
If the application requires a complete pump rather than individual components, review the Moyno 367 compatible replacement pump from ACCA Pumps.
Complete 367 Replacement Pump
If the application requires a complete pump rather than individual replacement parts, review the Moyno 367 compatible replacement pump from ACCA Pumps.
