500 Series Flexible-Joint Replacement Components

Moyno® 344 Pump Parts

OEM-compatible replacement components and part-number cross-references for supported Moyno® 344 progressive cavity pumps.

ACCA Pumps organizes 344 rotors, stators, flexible joints, drive shafts, bearings, sealing components and service hardware using the OEM 500 Series service structure.

344500 Series Model
FlexJoint Design
40 PSIMax Discharge Pressure
1750Max RPM
Moyno 344 progressive cavity pump compatible replacement parts

344 Engineering Overview

The 344 is part of the Moyno® 500 Series 300-model family. It uses a flexible joint to transmit torque between the drive shaft and rotor while accommodating eccentric rotor motion. Model 34411 is a packing-gland configuration. The service manual specifies four 3/16-inch square packing rings and grease lubrication during assembly.

Flexible-Joint Drive

Inspect the shaft, flexible joint and rotor together during overhaul because wear in one component can affect adjacent drive-train parts.

Model Identification

Use the complete model suffix and serial number. Material and sealing variations can change the applicable OEM part number.

Rotor & Stator Selection

The 344 uses model-specific rotor and stator part numbers listed in the OEM service documentation.

344 Engineering Data

Engineering DataSpecification
Pump FamilyMoyno® 500 Series
Base Model344
Joint DesignFlexible joint
Suction Port3/4 in NPT (1 in NPT on 08 version)
Discharge Port3/4 in NPT
Maximum Discharge Pressure40 PSI
Maximum Speed1750 RPM
Stator Elastomers ListedNBR, EPDM, FPM
Nylon ConfigurationsExcluded from ACCA 500 Series catalog

Moyno 344 Replacement Parts Reference

ACCA part numbers use the OEM part number with an A- prefix. The table preserves model and material distinctions from the OEM service documentation; nylon-specific components are omitted.

Ref.Component DescriptionACCA Part NumberOEM Part NumberNotes / Applicable Types
1Pump Body – Cast IronA-330-1065-002330-1065-002344 family
1Pump Body – 316 Stainless SteelA-330-1910-002330-1910-002344 family
1Pump Body – Packing Gland ModelA-340-1000-001340-1000-001344 family
1ADischarge HousingA-340-2362-000340-2362-000344 family
1BBearing HousingA-330-4587-000330-4587-000344 family
1CPump BaseA-340-2369-000340-2369-000344 family
2Suction Housing – Cast IronA-330-1064-002330-1064-002344 family
2Suction Housing – 316 Stainless SteelA-330-1911-002330-1911-002344 family
21Stator – NBRA-340-3504-120340-3504-120344 family
21Stator – EPDMA-340-3504-320340-3504-320344 family
21Stator – FPMA-340-3504-520340-3504-520344 family
22Rotor – 416 Stainless SteelA-320-1841-000320-1841-000344 family
22Rotor – 316 Stainless SteelA-320-2934-000320-2934-000344 family
24Flexible Joint – Carbon Steel / NBRA-320-1511-000320-1511-000344 family
24Flexible Joint – 316 SS / NBRA-320-3759-000320-3759-000344 family
24Flexible Joint – 316 SS / EPDMA-320-6367-000320-6367-000344 family
24Flexible Joint – 316 SS / FPMA-320-4670-000320-4670-000344 family
26Drive Shaft – 416 Stainless SteelA-320-1499-000320-1499-000344 family
26Drive Shaft – 316 Stainless SteelA-320-2938-000320-2938-000344 family
26Drive Shaft – Packing Model 34411A-320-2448-000320-2448-000344 family
29Bearing (2 required)A-630-0502-031630-0502-031344 family
33Bearing SpacerA-320-1900-000320-1900-000344 family
41Packing GlandA-320-0101-004320-0101-00434411 packing model
42PackingA-340-3396-005340-3396-00534411 packing model
47Gland BoltA-619-1520-161619-1520-16134411 packing model
66Snap RingA-320-1506-000320-1506-000344 family
66AShaft Snap RingA-320-4182000320-4182000344 family
69Mechanical Seal – NBRA-320-2424-000320-2424-000344 elastomer option
69Mechanical Seal – EPDMA-320-6379-000320-6379-000344 elastomer option
69Mechanical Seal – FPMA-320-6501-000320-6501-000344 elastomer option
77Slinger RingA-320-6382-000320-6382-000344 family
77Slinger Ring – Packing ConfigurationA-320-6384-000320-6384-000344 family
100Pipe Plug (3 required)A-610-0120-021610-0120-021344 family
112Screws (8 required)A-619-1430-103619-1430-103344 family
112Screws – Stainless ConfigurationA-320-5968-000320-5968-000344 family
112Screws – Packing ConfigurationA-619-1430-103619-1430-103344 family
112CScrews (4 required)A-619-0890-281619-0890-281344 family
215Lock Washer (8 required)A-320-6464-000320-6464-000344 family
KITElastomer Repair / Conversion Kit – NBRA-311-9031-000311-9031-000344
KITElastomer Repair / Conversion Kit – EPDMA-311-9030-000311-9030-000344
KITElastomer Repair / Conversion Kit – FPMA-311-9057-000311-9057-000344

344 Repair and Conversion Kits

Configuration / ElastomerACCA Kit NumberOEM Kit Number
NBRA-311-9031-000311-9031-000
EPDMA-311-9030-000311-9030-000
FPMA-311-9057-000311-9057-000

500 Series Internal Construction

Moyno 500 Series progressive cavity pump cutaway showing rotor stator flexible joint and drive shaft

Service as an Assembly

During overhaul, inspect the rotor, stator, flexible joint, shaft, bearings and sealing components for coordinated wear.

Related 500 Series Models

Need Help Identifying Moyno 344 Parts?

Send the complete pump model, serial number and OEM part number when available.

281-576-7722   |   info@accapumps.com

Trademark Disclaimer: Moyno® is a registered trademark of its respective owner. References are used solely to identify compatible equipment and replacement applications. ACCA Pumps is an independent aftermarket manufacturer and is not affiliated with or endorsed by the trademark owner.

Complete 344 Replacement Pump

If the application requires a complete pump rather than individual components, review the Moyno 344 compatible replacement pump from ACCA Pumps.

Complete 344 Replacement Pump

If the application requires a complete pump rather than individual replacement parts, review the Moyno 344 compatible replacement pump from ACCA Pumps.