ACCA 6AG050 Progressive Cavity Pump
Six-stage 050 configuration using the G drive end for supported Moyno® 6G050 G1 installations.
The 6AG050 combines a six-stage 050 pumping section with the G drive end and matching 6-inch process flanges.
6AG050 at a Glance
6 Stages
Six-stage 050 arrangement.
G Drive End
G-family drive end.
050 Element
Element 050 reference available.
6 in × 6 in
Matching process flanges.
Understanding the 6AG050 Model Code
6 · Pressure Class
Six-stage configuration rated up to 450 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
050 · Pumping Element
Element displacement: 48.0 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
6AG050 Dimensions and Installation Envelope
The 6AG050 measures 158.19 inches at A, 126.06 inches at B and weighs approximately 1,305 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6AG050 | 158.19 | 126.06 | 9.00 | 16.00 | 2.38 | 11.50 | 6 in | 11.00 | 6 in | 12.50 | 1,305 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
6AG050 Performance Curve
Element 050 Performance Curve
View or download the Element 050 performance curve for capacity, speed and operating-reference information used when evaluating the 6AG050.
Performance and Selection
The Element 050 reference includes 6G050. Confirm flow, differential pressure, fluid properties, suction conditions and speed. Use pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 050 pumping-element service parts.
Specify an ACCA 6AG050
Send the complete 6G050 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 6AG050
The 6AG050 pairs the six-stage, up to 450 psi configuration with the 050 element, providing 48.0 GPM per 100 RPM. The G drive end is rated up to 10.8 HP per 100 RPM, making this a higher-pressure 050-element configuration on the G mechanical platform.
The 050 element increases displacement relative to the 036 element while the six-stage geometry defines the pressure class. Actual speed and power should be selected from required flow, differential pressure, viscosity, solids, temperature and suction conditions.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.