ACCA 6AG036 Progressive Cavity Pump
Six-stage 036 configuration using the G drive end for supported Moyno® 6G036 G1 installations.
The 6AG036 combines a six-stage 036 pumping section with the G drive end and matching 6-inch process flanges.
6AG036 at a Glance
6 Stages
Six-stage 036 arrangement.
G Drive End
G-family drive end.
036 Element
Element 036 reference available.
6 in × 6 in
Matching process flanges.
Understanding the 6AG036 Model Code
6 · Pressure Class
Six-stage configuration rated up to 450 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
036 · Pumping Element
Element displacement: 34.35 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
6AG036 Dimensions and Installation Envelope
The 6AG036 measures 125.81 inches at A, 93.69 inches at B and weighs approximately 1,160 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6AG036 | 125.81 | 93.69 | 9.00 | 16.00 | 2.38 | 11.50 | 6 in | 11.00 | 6 in | 12.50 | 1,160 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
6AG036 Performance Curve
Element 036 Performance Curve
View or download the Element 036 performance curve for capacity, speed and operating-reference information used when evaluating the 6AG036.
Performance and Selection
The Element 036 reference includes 6G036. Review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 036 pumping-element service parts.
Specify an ACCA 6AG036
Send the complete 6G036 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 6AG036
The 6AG036 combines a six-stage, up to 450 psi pressure class with the 036 pumping element at 34.35 GPM per 100 RPM. Its G drive end is rated up to 10.8 HP per 100 RPM, placing this configuration in the higher-pressure portion of the 036 element family while retaining the G-size drive-end platform.
Compared with lower-stage 036 configurations, the defining engineering difference is the six-stage pressure capability. Final operating speed, power, stator material and suction conditions still need to be selected from the actual duty point rather than model code alone.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.