ACCA 6AF022 Progressive Cavity Pump
Six-stage 022 configuration using the F drive end for supported Moyno® 6F022 G1 installations.
The 6AF022 combines the 022 element with the F drive end in a six-stage configuration and matching 6-inch process flanges.
6AF022 at a Glance
6 Stages
Six-stage 022 arrangement.
F Drive End
F-family drive end.
022 Element
Element 022 family performance reference available.
6 in × 6 in
Matching process flanges.
Understanding the 6AF022 Model Code
6 · Pressure Class
Six-stage configuration rated up to 450 psi.
F · Drive End
F drive end rated up to 5.9 HP per 100 RPM.
022 · Pumping Element
Element displacement: 21.89 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
6AF022 Dimensions and Installation Envelope
The 6AF022 measures 112.19 inches at A, 82.31 inches at B and weighs approximately 735 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6AF022 | 112.19 | 82.31 | 7.00 | 13.50 | 2.12 | 10.00 | 6 in | 11.00 | 6 in | 12.50 | 735 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
6AF022 Performance Curve
Element 022 Performance Curve
View or download the Element 022 performance curve for capacity, speed and operating-reference information used when evaluating the 6AF022. Confirm the complete nameplate and duty because the source curve and G1 dimension references use different six-stage drive-end designations.
Performance and Selection
The published ACCA 022 curve is retained as an element-family reference, but the source curve list and G1 dimension sheet use different six-stage F/E drive-end designations. Confirm the complete 6F022 nameplate and operating duty before applying the curve to selection.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® F Drive End?
ACCA supports aftermarket F drive-end and 022 pumping-element service parts.
Specify an ACCA 6AF022
Send the complete 6F022 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 6AF022
The 6AF022 combines the 022 element at 21.89 GPM per 100 RPM with the F drive end and a six-stage 450 psi pressure class. It increases displacement over the 012 while preserving the same drive family and high-pressure stage arrangement.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.