ACCA 6AF012 Progressive Cavity Pump
Six-stage 012 configuration using the F drive end for supported Moyno® 6F012 G1 installations.
The 6AF012 uses the small 012 pumping element in a six-stage F-drive arrangement with a 6-inch suction flange and 4-inch discharge flange.
6AF012 at a Glance
6 Stages
Six-stage 012 arrangement.
F Drive End
F-family drive end.
012 Element
Element 012 family performance reference available.
6 in × 4 in
Unequal suction and discharge flanges.
Understanding the 6AF012 Model Code
6 · Pressure Class
Six-stage configuration rated up to 450 psi.
F · Drive End
F drive end rated up to 5.9 HP per 100 RPM.
012 · Pumping Element
Element displacement: 11.89 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
6AF012 Dimensions and Installation Envelope
The 6AF012 measures 102.38 inches at A, 72.50 inches at B and weighs approximately 605 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6AF012 | 102.38 | 72.50 | 7.00 | 13.50 | 2.12 | 10.00 | 6 in | 11.00 | 4 in | 10.75 | 605 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
6AF012 Performance Curve
Element 012 Performance Curve
View or download the Element 012 performance curve for capacity, speed and operating-reference information used when evaluating the 6AF012. Confirm the complete nameplate and duty because the source curve and G1 dimension references use different six-stage drive-end designations.
Performance and Selection
The published ACCA 012 curve is retained as an element-family reference, but the source configuration list and G1 dimension sheet use different six-stage drive-end designations. Confirm the complete 6F012 nameplate and operating duty before applying the curve to selection.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® F Drive End?
ACCA supports aftermarket F drive-end and 012 pumping-element service parts.
Specify an ACCA 6AF012
Send the complete 6F012 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 6AF012
The 6AF012 uses the 012 element at 11.89 GPM per 100 RPM with the F drive end rated to 5.9 HP per 100 RPM. Its six-stage 450 psi class prioritizes differential-pressure capability at relatively low displacement.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.