ACCA 6AE008 Progressive Cavity Pump
Six-stage 008 configuration using the E drive end for supported Moyno® 6E008 G1 installations.
The 6AE008 extends the compact 008 element family to six stages while retaining the E drive end and 4-inch process flanges. ACCA does not publish an Element 008 curve, so selection is duty based.
6AE008 at a Glance
6 Stages
Six-stage 008 arrangement.
E Drive End
E-family drive end.
008 Element
Duty-based performance selection.
4 in × 4 in
Matching process flanges.
Understanding the 6AE008 Model Code
6 · Pressure Class
Six-stage configuration rated up to 450 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
008 · Pumping Element
Element displacement: 8.13 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
6AE008 Dimensions and Installation Envelope
The 6AE008 measures 79.50 inches at A, 53.62 inches at B and weighs approximately 425 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6AE008 | 79.50 | 53.62 | 6.00 | 11.50 | 1.88 | 8.00 | 4 in | 9.00 | 4 in | 10.00 | 425 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
Performance Selection for the 008 Element
No neighboring curve is substituted. Send flow, differential pressure, fluid properties, suction conditions and speed for application-specific review. Use positive-displacement pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and compatible pumping-element service parts.
Specify an ACCA 6AE008
Send the complete 6E008 G1 nameplate and operating duty for replacement selection.
Engineering Context for the 6AE008
The 6AE008 combines the smallest documented element, 8.13 GPM per 100 RPM, with the highest listed stage class at 450 psi. It uses the E drive end rated to 3.8 HP per 100 RPM, making it a low-displacement configuration focused on multistage pressure capability.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.