ACCA 4AG090 Progressive Cavity Pump
Four-stage 090 configuration using the G drive end for supported Moyno® 4G090 G1 installations.
The 4AG090 combines the 090 element with the G drive end in a four-stage arrangement and matching 8-inch process flanges.
4AG090 at a Glance
4 Stages
Four-stage 090 arrangement.
G Drive End
G-family drive end.
090 Element
Element 090 reference available.
8 in × 8 in
Matching process flanges.
Understanding the 4AG090 Model Code
4 · Pressure Class
Four-stage configuration rated up to 350 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
090 · Pumping Element
88.0 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
4AG090 Dimensions and Installation Envelope
The 4AG090 measures 136.88 inches at A, 103.75 inches at B and weighs approximately 1,270 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4AG090 | 136.88 | 103.75 | 9.00 | 17.50 | 2.38 | 11.50 | 8 in | 13.50 | 8 in | 13.50 | 1,270 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
4AG090 Performance Curve
Element 090 Performance Curve
View or download the Element 090 performance curve for capacity, speed and operating-reference information used when evaluating the 4AG090.
Performance and Selection
The Element 090 reference includes 4G090. Review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 090 pumping-element service parts.
Specify an ACCA 4AG090
Send the complete 4G090 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 4AG090
The 4AG090 reaches 88.0 GPM per 100 RPM from the 090 element while retaining the G drive end rated to 10.8 HP per 100 RPM. It is the higher-displacement end of the four-stage G-drive group and carries the 350 psi pressure class.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.