ACCA 4AG065 Progressive Cavity Pump
Four-stage 065 configuration using the G drive end for supported Moyno® 4G065 G1 installations.
The 4AG065 combines the 065 pumping element with the G drive end, four stages and matching 8-inch process flanges.
4AG065 at a Glance
4 Stages
Four-stage 065 arrangement.
G Drive End
G-family drive end.
065 Element
Element 065 reference available.
8 in × 8 in
Matching process flanges.
Understanding the 4AG065 Model Code
4 · Pressure Class
Four-stage configuration rated up to 350 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
065 · Pumping Element
64.05 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Confirm the complete nameplate and operating duty before selecting replacement components.
4AG065 Dimensions and Installation Envelope
The 4AG065 measures 110.50 inches at A, 77.38 inches at B and weighs approximately 1,210 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4AG065 | 110.50 | 77.38 | 9.00 | 17.50 | 2.38 | 11.50 | 8 in | 13.50 | 8 in | 13.50 | 1,210 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
4AG065 Performance Curve
Element 065 Performance Curve
View or download the Element 065 performance curve for capacity, speed and operating-reference information used when evaluating the 4AG065.
Performance and Selection
The Element 065 reference includes 4G065. Confirm flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use positive-displacement pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 065 pumping-element service parts.
Specify an ACCA 4AG065
Send the complete 4G065 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 4AG065
The 4AG065 uses the 065 element at 64.05 GPM per 100 RPM with the G drive end rated to 10.8 HP per 100 RPM. In the four-stage 350 psi class, it increases displacement while preserving the same drive-end family as the 036 and 050 models.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.