ACCA 4AF036 Progressive Cavity Pump
Four-stage 036 configuration using the F drive end for supported Moyno® 4F036 G1 installations.
The 4AF036 combines a four-stage 036 pumping section with the F drive end and matching 6-inch process connections.
4AF036 at a Glance
4 Stages
Four-stage 036 arrangement.
F Drive End
F-family drive end.
036 Element
Element 036 reference available.
6 in × 6 in
Matching process flanges.
Understanding the 4AF036 Model Code
4 · Pressure Class
Four-stage configuration rated up to 350 psi.
F · Drive End
F drive end rated up to 5.9 HP per 100 RPM.
036 · Pumping Element
34.35 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
4AF036 Dimensions and Installation Envelope
The 4AF036 measures 92.12 inches at A, 63.12 inches at B and weighs approximately 760 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4AF036 | 92.12 | 63.12 | 7.00 | 14.00 | 2.12 | 10.00 | 6 in | 11.00 | 6 in | 11.00 | 760 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
4AF036 Performance Curve
Element 036 Performance Curve
View or download the Element 036 performance curve for capacity, speed and operating-reference information used when evaluating the 4AF036.
Performance and Selection
The Element 036 reference includes 4F036. Review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use positive-displacement pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® F Drive End?
ACCA supports aftermarket F drive-end and 036 pumping-element service parts.
Specify an ACCA 4AF036
Send the complete 4F036 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 4AF036
The 4AF036 combines the 036 element at 34.35 GPM per 100 RPM with the F drive end and a four-stage 350 psi pressure class. It occupies a middle ground between the lower-flow 022 and higher-flow 050 configurations in the same drive family.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.