ACCA 4AE022 Progressive Cavity Pump
Four-stage 022 configuration using the E drive end for supported Moyno® 4E022 G1 installations.
The 4AE022 combines a four-stage 022 pumping section with the E drive end and matching 6-inch process flanges.
4AE022 at a Glance
4 Stages
Four-stage 022 arrangement.
E Drive End
E-family drive end.
022 Element
Element 022 reference available.
6 in × 6 in
Matching process flanges.
Understanding the 4AE022 Model Code
4 · Pressure Class
Four-stage configuration rated up to 350 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
022 · Pumping Element
21.89 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
4AE022 Dimensions and Installation Envelope
The 4AE022 measures 82.94 inches at A, 56.81 inches at B and weighs approximately 500 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4AE022 | 82.94 | 56.81 | 6.00 | 12.50 | 1.88 | 8.00 | 6 in | 11.00 | 6 in | 11.00 | 500 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
4AE022 Performance Curve
Element 022 Performance Curve
View or download the Element 022 performance curve for capacity, speed and operating-reference information used when evaluating the 4AE022.
Performance and Selection
The Element 022 reference includes 4E022. Review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and 022 pumping-element service parts.
Specify an ACCA 4AE022
Send the complete 4E022 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 4AE022
The 4AE022 combines 21.89 GPM per 100 RPM displacement with the four-stage 350 psi pressure class. The E drive end remains rated to 3.8 HP per 100 RPM, so power demand should be checked carefully as differential pressure rises.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.