ACCA 4AE012 Progressive Cavity Pump
Four-stage 012 configuration using the E drive end for supported Moyno® 4E012 G1 installations.
The 4AE012 extends the compact 012 element family to four stages while retaining the E drive end and 4-inch process flanges.
4AE012 at a Glance
4 Stages
Four-stage 012 arrangement.
E Drive End
E-family drive end.
012 Element
Element 012 reference available.
4 in × 4 in
Matching process flanges.
Understanding the 4AE012 Model Code
4 · Pressure Class
Four-stage configuration rated up to 350 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
012 · Pumping Element
11.89 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
4AE012 Dimensions and Installation Envelope
The 4AE012 measures 75.62 inches at A, 49.75 inches at B and weighs approximately 380 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4AE012 | 75.62 | 49.75 | 6.00 | 11.50 | 1.88 | 8.00 | 4 in | 9.00 | 4 in | 10.00 | 380 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
4AE012 Performance Curve
Element 012 Performance Curve
View or download the Element 012 performance curve for capacity, speed and operating-reference information used when evaluating the 4AE012.
Performance and Selection
The Element 012 reference includes 4E012. Confirm flow, differential pressure, fluid properties, suction conditions and speed. Use system pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and 012 pumping-element service parts.
Specify an ACCA 4AE012
Send the complete 4E012 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 4AE012
The 4AE012 applies the 012 element’s 11.89 GPM per 100 RPM displacement to a four-stage 350 psi configuration. It retains the E drive end rated to 3.8 HP per 100 RPM, emphasizing pressure capability at relatively low displacement.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.