ACCA 4AE008 Progressive Cavity Pump
Four-stage 008 configuration using the E drive end for supported Moyno® 4E008 G1 installations.
The 4AE008 is a four-stage small-element G1 configuration with 4-inch process flanges. ACCA does not publish an Element 008 curve, so selection is based on the actual operating duty.
4AE008 at a Glance
4 Stages
Four-stage 008 arrangement.
E Drive End
Compact E-family drive end.
008 Element
Duty-based performance selection.
4 in × 4 in
Matching process flanges.
Understanding the 4AE008 Model Code
4 · Pressure Class
Four-stage configuration rated up to 350 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
008 · Pumping Element
8.13 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
4AE008 Dimensions and Installation Envelope
The 4AE008 measures 63.50 inches at A, 37.62 inches at B and weighs approximately 375 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4AE008 | 63.50 | 37.62 | 6.00 | 11.50 | 1.88 | 8.00 | 4 in | 9.00 | 4 in | 10.00 | 375 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
Performance Selection for the 008 Element
No neighboring curve is substituted. Send flow, differential pressure, fluid properties, suction conditions and speed for application-specific review. Use pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and compatible pumping-element service parts.
Specify an ACCA 4AE008
Send the complete 4E008 G1 nameplate and operating duty for replacement selection.
Engineering Context for the 4AE008
The 4AE008 is a low-displacement, four-stage configuration: the 008 element provides 8.13 GPM per 100 RPM while the stage code carries a 350 psi pressure class. It uses the compact E drive end rated to 3.8 HP per 100 RPM.
Engineering Context for the 4AE008
The 4AE008 is a low-displacement, four-stage configuration: the 008 element provides 8.13 GPM per 100 RPM while the stage code carries a 350 psi pressure class. It uses the compact E drive end rated to 3.8 HP per 100 RPM.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.