ACCA 2AK620 Progressive Cavity Pump
Two-stage 620 configuration using the K drive end for supported Moyno® 2K620 G1 installations.
The 2AK620 is a large two-stage 620 configuration with matching 10-inch process flanges. ACCA does not publish an Element 620 curve, so operating selection is based on the actual duty.
2AK620 at a Glance
2 Stages
Two-stage 620 arrangement.
K Drive End
Large K-family drive end.
620 Element
Duty-based performance selection.
10 in × 10 in
Matching process flanges.
Understanding the 2AK620 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
K · Drive End
K drive end rated up to 54.0 HP per 100 RPM.
620 · Pumping Element
617.38 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AK620 Dimensions and Installation Envelope
The 2AK620 measures 220.81 inches at A, 171.00 inches at B and weighs approximately 3,740 lb. It is roughly 80.62 inches longer at A than the single-stage 1AK620.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AK620 | 220.81 | 171.00 | 13.00 | 23.50 | 3.88 | 17.00 | 10 in | 16.00 | 10 in | 17.50 | 3,740 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
Performance Selection for the 620 Element
No neighboring element curve is substituted. Send required flow, differential pressure, fluid viscosity, solids loading, temperature, suction conditions and intended speed for application-specific review. Protect the system against closed-discharge operation and dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® K Drive End?
ACCA supports aftermarket K drive-end and compatible pumping-element service parts.
Specify an ACCA 2AK620
Send the complete 2K620 G1 nameplate and operating duty for replacement selection.
Engineering Context for the 2AK620
The 2AK620 pairs the 617.38 GPM-per-100-RPM 620 element with the K drive end rated to 54.0 HP per 100 RPM. Its two-stage 175 psi configuration combines very high displacement with increased pressure capability, so system suction and available power deserve close review.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.