ACCA 2AJ175 Progressive Cavity Pump
Two-stage 175 configuration using the J drive end for supported Moyno® 2J175 G1 installations.
The 2AJ175 combines the 175 pumping element with a J-size drive end, matching 10-inch suction and discharge flanges and a documented two-stage installation envelope.
2AJ175 at a Glance
2 Stages
Two-stage 175 pumping-element arrangement.
J Drive End
J-family mechanical drive end.
175 Element
Element 175 performance reference available.
10 in × 10 in
Matching suction and discharge flanges.
Understanding the 2AJ175 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
J · Drive End
J drive end rated up to 28.0 HP per 100 RPM.
175 · Pumping Element
174.0 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AJ175 Dimensions and Installation Envelope
The 2AJ175 measures 101.38 inches at A, 60.50 inches at B and weighs approximately 1,840 lb. The 10-inch suction and discharge connections use 16.00-inch M and M1 dimensions.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AJ175 | 101.38 | 60.50 | 11.00 | 21.50 | 3.38 | 15.00 | 10 in | 16.00 | 10 in | 16.00 | 1,840 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AJ175 Performance Curve
Element 175 Performance Curve
View or download the Element 175 performance curve for capacity, speed and operating-reference information used when evaluating the 2AJ175.
Performance and Operating Selection
The Element 175 reference includes the 2J175 configuration. Final selection should consider flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. As a positive-displacement pump, the unit should not operate against a closed discharge and the pumping element should not be intentionally run dry.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Related 175 Element Configurations
ACCA 1AH175
Single-stage 175 with H drive end.
ACCA 2AH175
Two-stage 175 with H drive end.
ACCA 4AJ175
Four-stage 175 retaining J drive end.
ACCA 6AK175
Six-stage 175 with K drive end.
Need Parts for a Moyno® J Drive End?
ACCA supports aftermarket J drive-end service components plus compatible rotor and stator parts for supported 2000 Series configurations.
Specify an ACCA 2AJ175
Send the complete 2J175 G1 nameplate and operating conditions for replacement review and selection.
Engineering Context for the 2AJ175
The 2AJ175 retains the 175 element at 174.0 GPM per 100 RPM but uses the larger J drive end rated to 28.0 HP per 100 RPM. Within the two-stage 175 psi family, that drive-end change provides substantially more mechanical capacity than the H-drive 175 configuration.
Technical Resources and Related Information
Moyno® 2000 Series Pumps
Browse the complete ACCA A-Series G1 model range.
Moyno® Cross Reference
Use ACCA cross-reference resources to identify aftermarket replacement options.
2000 Series Nameplate Guide
Decode model and configuration information from the pump nameplate.
Progressive Cavity Pump Applications
Explore ACCA application and industry resources for progressive cavity pumps.
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.