ACCA 2AH115 Progressive Cavity Pump
Two-stage 115 configuration using the H drive end for supported Moyno® 2H115 G1 installations.
The 2AH115 moves the 115 pumping element into the larger H drive-end family while retaining matching 8-inch process flanges.
2AH115 at a Glance
2 Stages
Two-stage 115 arrangement.
H Drive End
H-family drive end.
115 Element
Element 115 reference available.
8 in × 8 in
Matching process flanges.
Understanding the 2AH115 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
H · Drive End
H drive end rated up to 16.0 HP per 100 RPM.
115 · Pumping Element
112.60 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AH115 Dimensions and Installation Envelope
The 2AH115 measures 89.88 inches at A, 54.25 inches at B and weighs approximately 1,185 lb. The H drive end increases D to 11.00 inches and W to 15.00 inches.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AH115 | 89.88 | 54.25 | 11.00 | 19.50 | 2.88 | 15.00 | 8 in | 13.50 | 8 in | 13.50 | 1,185 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AH115 Performance Curve
Element 115 Performance Curve
View or download the Element 115 performance curve for capacity, speed and operating-reference information used when evaluating the 2AH115.
Performance and Selection
The Element 115 reference includes 2H115. Confirm actual flow, differential pressure, fluid properties, suction conditions and speed. Use system pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® H Drive End?
ACCA supports aftermarket H drive-end and 115 pumping-element service parts.
Specify an ACCA 2AH115
Send the complete 2H115 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 2AH115
The 2AH115 keeps the 115 element’s 112.60 GPM per 100 RPM displacement but moves to the H drive end rated to 16.0 HP per 100 RPM. This provides additional drive capacity within the two-stage 175 psi family.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.