ACCA 2AG115 Progressive Cavity Pump
Two-stage 115 configuration using the G drive end for supported Moyno® 2G115 G1 installations.
The 2AG115 extends the 115 family to two stages while retaining the G drive end and matching 8-inch process flanges.
2AG115 at a Glance
2 Stages
Two-stage 115 arrangement.
G Drive End
G-family drive end.
115 Element
Element 115 reference available.
8 in × 8 in
Matching process flanges.
Understanding the 2AG115 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
115 · Pumping Element
112.60 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AG115 Dimensions and Installation Envelope
The 2AG115 measures 85.62 inches at A, 52.49 inches at B and weighs approximately 1,005 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AG115 | 85.62 | 52.49 | 9.00 | 17.50 | 2.38 | 11.50 | 8 in | 13.50 | 8 in | 13.50 | 1,005 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AG115 Performance Curve
Element 115 Performance Curve
View or download the Element 115 performance curve for capacity, speed and operating-reference information used when evaluating the 2AG115.
Performance and Selection
The Element 115 reference includes 2G115. Confirm flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use positive-displacement pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 115 pumping-element service parts.
Specify an ACCA 2AG115
Send the complete 2G115 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 2AG115
The 2AG115 uses the 115 element at 112.60 GPM per 100 RPM with the 10.8 HP-per-100-RPM G drive end. In the two-stage 175 psi class, it extends G-family selection toward higher displacement while retaining multistage pressure capability.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.