ACCA 2AG090 Progressive Cavity Pump
Two-stage 090 configuration using the G drive end for supported Moyno® 2G090 G1 installations.
The 2AG090 combines the 090 pumping element with the G drive end and matching 8-inch process flanges.
2AG090 at a Glance
2 Stages
Two-stage 090 arrangement.
G Drive End
G-family drive end.
090 Element
Element 090 reference available.
8 in × 8 in
Matching process flanges.
Understanding the 2AG090 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
090 · Pumping Element
88.0 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AG090 Dimensions and Installation Envelope
The 2AG090 measures 87.88 inches at A, 54.75 inches at B and weighs approximately 960 lb. The G drive end increases the mechanical envelope relative to the 2AF090.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AG090 | 87.88 | 54.75 | 9.00 | 17.50 | 2.38 | 11.50 | 8 in | 13.50 | 8 in | 13.50 | 960 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AG090 Performance Curve
Element 090 Performance Curve
View or download the Element 090 performance curve for capacity, speed and operating-reference information used when evaluating the 2AG090.
Performance and Selection
The Element 090 reference includes 2G090. Review actual flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use system pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 090 pumping-element service parts.
Specify an ACCA 2AG090
Send the complete 2G090 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 2AG090
The 2AG090 combines the 090 element at 88.0 GPM per 100 RPM with the G drive end rated to 10.8 HP per 100 RPM. Its 175 psi two-stage class gives a balance of higher flow and increased differential-pressure capability.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.