ACCA 2AF065 Progressive Cavity Pump
Two-stage 065 configuration using the F drive end for supported Moyno® 2F065 G1 installations.
The 2AF065 retains the F drive end and matching 8-inch process flanges while extending the 065 family to two stages.
2AF065 at a Glance
2 Stages
Two-stage 065 arrangement.
F Drive End
F-family drive end.
065 Element
Element 065 reference available.
8 in × 8 in
Matching process flanges.
Understanding the 2AF065 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
F · Drive End
F drive end rated up to 5.9 HP per 100 RPM.
065 · Pumping Element
64.05 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AF065 Dimensions and Installation Envelope
The 2AF065 measures 71.98 inches at A, 41.49 inches at B and weighs approximately 700 lb. It is longer and heavier than the single-stage 1AF065 while retaining the same F-drive and 8-inch connection family.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AF065 | 71.98 | 41.49 | 7.00 | 15.50 | 2.12 | 10.00 | 8 in | 13.50 | 8 in | 13.50 | 700 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AF065 Performance Curve
Element 065 Performance Curve
View or download the Element 065 performance curve for capacity, speed and operating-reference information used when evaluating the 2AF065.
Performance and Selection
The Element 065 reference includes 2F065. Final sizing should review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed; use system pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® F Drive End?
ACCA supports aftermarket F drive-end and 065 pumping-element service parts.
Specify an ACCA 2AF065
Send the complete 2F065 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 2AF065
The 2AF065 combines 64.05 GPM per 100 RPM displacement with the F drive end rated to 5.9 HP per 100 RPM. Its two-stage 175 psi class makes it the pressure-capable counterpart to the single-stage 065 configuration.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.