ACCA 2AE050 Progressive Cavity Pump
Two-stage 050 configuration using the E drive end for supported Moyno® 2E050 G1 installations.
The 2AE050 retains the E drive-end family while extending the 050 pumping element to a two-stage arrangement with 6-inch process flanges.
2AE050 at a Glance
2 Stages
Two-stage 050 arrangement.
E Drive End
E-family drive end.
050 Element
Element 050 reference available.
6 in × 6 in
Matching process flanges.
Understanding the 2AE050 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
050 · Pumping Element
48.0 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AE050 Dimensions and Installation Envelope
The 2AE050 measures 71.34 inches at A, 44.74 inches at B and weighs approximately 515 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AE050 | 71.34 | 44.74 | 6.00 | 13.00 | 1.88 | 8.00 | 6 in | 11.00 | 6 in | 11.00 | 515 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AE050 Performance Curve
Element 050 Performance Curve
View or download the Element 050 performance curve for capacity, speed and operating-reference information used when evaluating the 2AE050.
Performance and Selection
The Element 050 reference includes 2E050. Confirm actual flow, differential pressure, fluid properties, suction conditions and speed. Use positive-displacement pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and 050 pumping-element service parts.
Specify an ACCA 2AE050
Send the complete 2E050 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 2AE050
The 2AE050 is the highest-displacement two-stage E-drive model in this set, using the 050 element at 48.0 GPM per 100 RPM. The 175 psi pressure class increases pressure capability while the E drive remains limited to 3.8 HP per 100 RPM.
Technical Resources
2000 Series · Cross Reference · Nameplate Guide · Applications
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.