ACCA 2AE036 Progressive Cavity Pump
Two-stage 036 configuration using the E drive end for supported Moyno® 2E036 G1 installations.
The 2AE036 combines the 036 pumping element with the E drive end and 6-inch process flanges in a two-stage configuration.
2AE036 at a Glance
2 Stages
Two-stage 036 arrangement.
E Drive End
E-family drive end.
036 Element
Element 036 performance reference available.
6 in × 6 in
Matching process flanges.
Understanding the 2AE036 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
036 · Pumping Element
34.35 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AE036 Dimensions and Installation Envelope
The 2AE036 measures 60.59 inches at A, 34.00 inches at B and weighs approximately 465 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AE036 | 60.59 | 34.00 | 6.00 | 13.00 | 1.88 | 8.00 | 6 in | 11.00 | 6 in | 11.00 | 465 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AE036 Performance Curve
Element 036 Performance Curve
View or download the Element 036 performance curve for capacity, speed and operating-reference information used when evaluating the 2AE036.
Performance and Selection
The Element 036 reference includes 2E036. Review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Use system pressure protection and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and 036 pumping-element service parts.
Specify an ACCA 2AE036
Send the complete 2E036 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 2AE036
The 2AE036 uses the 036 element at 34.35 GPM per 100 RPM in the two-stage 175 psi class. Its E drive end remains rated to 3.8 HP per 100 RPM, so the combination of pressure, speed and fluid viscosity should be checked against drive loading.
Technical Resources
2000 Series Pumps · Cross Reference · Nameplate Guide · Applications & Industries
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.