ACCA 2AE012 Progressive Cavity Pump
Two-stage 012 configuration using the E drive end for supported Moyno® 2E012 G1 installations.
The 2AE012 retains the compact E drive end and 4-inch process flanges while extending the 012 family to two stages.
2AE012 at a Glance
2 Stages
Two-stage 012 arrangement.
E Drive End
E-family drive-end geometry.
012 Element
Element 012 performance reference available.
4 in × 4 in
Matching process flanges.
Understanding the 2AE012 Model Code
2 · Pressure Class
Two-stage configuration rated up to 175 psi.
E · Drive End
E drive end rated up to 3.8 HP per 100 RPM.
012 · Pumping Element
11.89 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
2AE012 Dimensions and Installation Envelope
The 2AE012 measures 53.12 inches at A, 27.25 inches at B and weighs approximately 325 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2AE012 | 53.12 | 27.25 | 6.00 | 11.50 | 1.88 | 8.00 | 4 in | 9.00 | 4 in | 9.00 | 325 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
2AE012 Performance Curve
Element 012 Performance Curve
View or download the Element 012 performance curve for capacity, speed and operating-reference information used when evaluating the 2AE012.
Performance and Selection
The Element 012 reference includes 2E012. Final sizing should review flow, differential pressure, viscosity, solids, temperature, suction conditions and speed. Protect the positive-displacement system and avoid dry running.
Stator Material Options
Available stator materials include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer, and special application materials. Final material selection should be based on fluid compatibility, temperature, abrasion, and operating conditions.
Need Parts for a Moyno® E Drive End?
ACCA supports aftermarket E drive-end and 012 pumping-element service parts.
Specify an ACCA 2AE012
Send the complete 2E012 G1 nameplate and duty information for replacement review.
Engineering Context for the 2AE012
The 2AE012 retains the compact E drive and 012 element but uses a two-stage configuration rated to 175 psi. With 11.89 GPM per 100 RPM displacement, it trades the single-stage version’s pressure class for greater differential-pressure capability without increasing element displacement.
Technical Resources
2000 Series Pumps · Cross Reference · Nameplate Guide · Applications & Industries
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.