ACCA 1AG115 Progressive Cavity Pump
Single-stage 115 configuration using the G drive end for supported Moyno® 1G115 G1 installations.
The 1AG115 is the single-stage G-drive member of the 115 family, with matching 8-inch process flanges.
1AG115 at a Glance
1 Stage
Single-stage 115 arrangement.
G Drive End
G-family drive-end geometry.
115 Element
Element 115 performance reference available.
8 in × 8 in
Matching process flanges.
Understanding the 1AG115 Model Code
1 · Pressure Class
Single-stage configuration rated up to 87 psi.
G · Drive End
G drive end rated up to 10.8 HP per 100 RPM.
115 · Pumping Element
112.60 GPM per 100 RPM.
G1 · Pump Type
Standard G1 configuration.
Additional Nameplate Configuration Codes
The remaining nameplate characters identify the body material, internal material, stator material, sealing arrangement, shaft/internal variation and rotor variation. Stator material options include Nitrile, Urethane, Natural Rubber, EPDM, Fluoroelastomer and special materials selected for the application. Confirm the complete nameplate before selecting replacement components.
1AG115 Dimensions and Installation Envelope
The 1AG115 measures 62.25 inches at A, 29.12 inches at B and weighs approximately 825 lb.
| Model | A | B | D | E | H | W | Suction | M | Discharge | M1 | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1AG115 | 62.25 | 29.12 | 9.00 | 17.50 | 2.38 | 11.50 | 8 in | 13.50 | 8 in | 13.50 | 825 lb |
Dimensions in inches unless noted. Verify final installation dimensions against order documentation.
1AG115 Performance Curve
Element 115 Performance Curve
View or download the Element 115 performance curve for capacity, speed and operating-reference information used when evaluating the 1AG115.
Performance and Selection
The Element 115 reference includes 1G115. Review flow, differential pressure, fluid properties, suction conditions and speed; protect the system against closed-discharge operation and avoid dry running.
Need Parts for a Moyno® G Drive End?
ACCA supports aftermarket G drive-end and 115 pumping-element service parts.
Specify an ACCA 1AG115
Send the complete 1G115 G1 nameplate and operating conditions for replacement review.
Engineering Context for the 1AG115
The 1AG115 moves to the G drive end, rated to 10.8 HP per 100 RPM, with the 115 element displacing 112.60 GPM per 100 RPM. It is a higher-flow single-stage 87 psi configuration where suction conditions and speed become increasingly important to selection.
Technical Resources
2000 Series Pumps · Cross Reference · Nameplate Guide · Applications & Industries
Moyno® is a registered trademark of its respective owner. ACCA Pumps is not affiliated with or endorsed by Moyno. Brand and model references are used solely to identify aftermarket compatibility and replacement applications.