Goulds Pump Parts Reference

The following is a partial cross-reference of our Goulds pump parts. For API process-pump applications, see our Goulds 3700 replacement pumps and parts page for pump-size, component-position and RFQ identification guidance. Contact ACCA Pumps with the pump model, size, serial number and part number when available.

OEM Part Number	Description	Pump Model	Pump Size
E00021E000-1228	CASING, (HC600)	5500	6X8-26
R100-161-1204	IMPELLER	3196	2X3-8
02473A-6127	RADIAL BEARING	3298
0100-829-2-1203	NI-RES DISCHARGE HEAD	3735	1X2-11B
0100-829-2-1203.	O-RING, IMP’L, ITEM No.412A	3735/36	1×2-11
0100-860-2-1101	IMPELLER, W/RINGS	3405	2X3-11
0100-860-2-1203	IMPELLER, W/RINGS	3405	2X3-11
0101-197-2-1000	IMPELLER, WITH, IMP RING	3735/36	3×4-11H
0101-456-2-1000	IMPELLER, WITH, IMP RING	3735/36	1×2-11
0101-456-2-1152	IMPELLER	3735	1X2-11B
0101-500-1203	IMPELLER (6V), (M.D. 12 5/8″)	3796	6X6-13
0101-593-2-1203	IMPELLER, WITH, IMP RING	3735/36	4×6-13
0101-593-2-1216	IMPELLER, WITH, IMP RING	3735/36	4×6-13
0101-593-2-1223	IMPELLER, WITH, IMP RING	3735/36	4×6-13
0101-743-2-1167	IMPELLER, WITH, IMP RING	3735/36	2×4-11M
0101-743-2-1167	IMPELLER, WITH, IMP RING	3735/36	2×4-11M
0101-743-2-1203	IMPELLER, WITH, IMP RING	3735/36	3×4-11H
0101-879-1220	IMPELLER	3196	4X6-13
0101-903-2-1101	IMP. W/RING	3316	1.5X2-9
0101-905-2-1101	IMP. W/RING	3316	1.5X2-9
0101-911-3-1102	IMPELLER, W/RING-1ST STG	3316	3X4-11G
0101-911-3-1203	IMPELLER, W/RING-1ST STG	3316	3X4-11G
0101-913-3-1102	IMPELLER, W/RING-2ND STG	3316	3X4-11G
0101-913-3-1203	IMPELLER, W/RING-2ND STG	3316	3X4-11G
0101-919-1-1101	IMPL.-1ST STG, LESS WRG RINGS	3316	4X6-11
0101-919-2-1101	IMPELLER.-1ST STG, W/ RINGS	3316	4X6-11
0101-920-1-1203	IMPELLER L/RING, 1ST STG	3316	4X6-11
0101-920-2-1203	IMPELLER, W/RING-1ST STG, W/ BAL HOLES	3316	4X6-11
0101-921-1-1101	IMP’L- 2nd STG, LESS WRG RINGS	3316	4X6-11
0101-921-2-1101	IMPELLER- 2nd STG, W/ WRG RINGS	3316	4X6-11
0101-922-1-1203	IMPELLER, 2ND STG	3316	4X6-11
0101-922-2-1203	IMPELLER-2ND STG, W/ WRG RINGS	3316	4X6-11
0101-92B-1203	STUFFING BOX, COVER W/RING	3735	1X1.5-8
0102-426-1220	IMPELLER	3196	2X3-13
0103-304-1220	IMPELLER	3196	3X4-10
0104-146-9-1220	IMPELLER (6V), DIA= 9-1/2″	3196	3X4-13
0104-146A2-1216	IMPELLER W/TEFLON O-RING, 5 VANE	3196	1.5X3-13
0104-586-1203	FLUSH GLAND FOR DYN. SEAL, W/CHKSEAL	3196
0104-896-3-1101	IMP. IST STAGE-SUCTION, W/ WRG RING	3316	4X6-11HG
0104-897-3-1101	IMPELLER-DISC.-2ND STG, W/RING	3316	4X6-11HG
0104-995-1-1203	IMPELLER, L/RING, 1ST STG	3316	3X4-11H
0104-995-2-1203	IMPELLER, W/RING-1ST STG	3316	3X4-11H
0104-995-3-1203	IMPELLER-SUCT., W/RING-1ST STG	3316	4X6-11HG
0104-996-2-1203	IMPELLER, W/RING-2ND STG	3316	3X4-11H
0104-996-3-1203	IMPELLER-DISC., W/RING-2ND STG	3316	4X6-11HG
0105-110-11007	DISCHARGE HEAD	3935	BP70-11
0113-19-1-1203	DISCHARGE HEAD, 600 LBS.FLANGE	3335	HDB 210-12
0113-39-2-1203	IMPELLER, (W/RINGS)	3405	4X6-11G
0113-46-1220	IMPELLER 5 VANE, W/TEFLON O-RING	3196	1X1.5-8
0116-60-1220	IMPELLER (5V)	3196	3X4-8
0238106-1003	CASING, #125 FLG DRILLING	3405A	3X4-12
0238-42-1003	CASING, 125# FLG DRLNG	3405	4X6-14M
0238-46-1003	CASING U/L	3316	1.5X2-9
0239-100-2-1101	IMPELLER W/RINGS	3405	3X4-14
0239-69-1003	CASING U/L	3316	3X4-11H
0240-13-2-1101	IMPELLER WITH RINGS, (MD: 17.00″)	3405	3X4-17
0240-13-2-1203	IMPELLER, WITH RINGS	3405	3X4-17
0240-36-02-9766	IMP. W/ RINGS, 14.5″ DIA.	3404	8X10-17G
0240-53-1003	CASING	3135	4X12-14
0242-47-2-1203	IMPELLER, W/RINGS	3405	12X14-14DV
0243-1-2-1203	IMPELLER, W/RINGS, (MD: 12.0″)	3405	6X8-12
0243-44-1203	CASING, UPPER & LOWER HALF	3316	4X6-11HG
02495A463-5302	O’RING,, SIDEPLATE	3175	18″
0250-13-1003	CASING W/CAPS, 150#	34200	16X18-30
0251-23-1003	CASING, U/L HALF, 125# FLG DRILLING	3405	12X14-14DV
0251-30-1003	CASING U/L HALF, 125# FLG DRILLING	3405	12X14-12DV
0251-32-1-1102	SHAFT W/KEY W 4IN. ST. BOX, ASSY #9 PD 6	3405	12X14-12DV
0251-32-2-1102	IMPELLER, W/ IMP RINGS	3405	12X14-12DV
0251-54-1003	CASING U/L HALF, 125# FLG.	3405	5X8-14DV
0251-54-1203	CASING U/L HALF 125# FLG	3405	5X8-14DV
0251-65-1203	CASING	3735	4X6-13
0252-1-2-1000	IMP,SUCT. 1ST, STAGE, L/RINGS	3316	6X8-17
0252-121-2-1203	IMPELLER, W/RINGS	3420	18X20-30
0252-57-2-1007	IMPELLER W/ IMP. RINGS	3415	14X16-18
0252-82-2-1101	IMPELLER WITH, IMP RINGS	3405	6X8-22
0254-7-1203	CASING U/L HALF, 125# FLG DRILLING	3405	12X14-12DV
0255-116-1-1203	IMPELLER,	3415	8×10-22
0255-117-2-1203	IMPELLER W/IMP. RINGS, MD: 18.0″	3415	14X16-18
0255-118-2-1203	IMPELLER, WITH, IMP RINGS	3415	16X18-18
0255-21-1003	CASING	3175	3X6-14
0255-23-1003	CASING W/TAPS	3175	4X6-14
0255-25-1003	CASING W/TAPS	3175	4X6-18
0255-29-1003	CASING	3175	6X8-18
0255-33-1003	CASING	3175	8X10-14
0255-35-1003	CASING	3175	8X10-18
0255-37-1003	CASING	3175	8X10-22
0255-39-1003	CASING	3175	8×10-18H
0255-41-1003	CASING	3175	10X12-18
0255-42-1003	CASING	3175	10X12-22
0255-49-1003	CASING	3175	12×14-18
0255-51-1003	CASING W/ TAPS	3175	14X14-18
0256-117-1220	IMPELLER	3196	6X8-15
0256-87-1203	CASING, 150# SUC/300# DIS., W/PEDESTALS & BRG CAPS	3405	6X8-22DV
0257-10-2-1203	IMPELLER, W/ IMP RINGS	3405	6X8-22DV
0258-38B-1132	S. BOX CVR W/ WEAR RNG, WATER COOLED	3735	4X6-7
0259-107-02-1203	CASING,, WITH TAPS	3175	10X12-22
0262-5-1003	CASING W/CAPS, 300#	3420	16X18-30
0263-64-1011	CASING W/PLUGS, 150# FF FLANGES	3796	3X3-10
0263-77-1003	CASING	3405	4×6-11M
0265-07-1011	CASING W/PLUGS, 150#FF FLANGES	3796	2×2-10
0265-18-1011	CASING	3796	4X4-10
0265-29-1011	CASING W/PLUGS, 150#FF FLANGES	3796	4X4-13
0265-29-1203	CASING W/PLUGS, 150#FF FLANGES	3796	4X4-13
0265-48-1203	CASING W/ PLUGS, 150# FF FLANGES	3796	3X3-10
0265-48-1204	CASING W/PLUGS 150# FF	3796	3X3-10
0267-29-1203	CASING W/PLUGS, 150#FF FLANGES	3796	4X4-13
0267-43-1203	CASING	3796	4X4-10
0270-83B-1203	CASING W/RING & PLUG,, #300 RF FLG	3735	1.5X4-13
0270-85H-1203	CASING, W/WEAR RING	3735	1X2-11D
0270-89B-1132	CASING W/RING & PLUG, 300# RF FLG	3735	4X6-7
027881-1103	GLAND STFF/BOX	3450
029744G050-1002	IMPELLER NUT	12 CK
040060DR02-6470	IMPELLER	4105	3X4-13
045824G000-1228	LINER	JC	3X4-11
04584A15-6219	LABRINTH SEAL
046112G000-2217	SLEEVE	2 RX
046692G000 2217	SLEEVE, O.D. 2.125″	JC	3X4-11
046692G020-2217	SHAFT SLEEVE	JC	COMMON
046692G020-2229	SLEEVE, SHAFT	JC	COMMON
046957G410-6310	SHIM SET	HS	22″
046957G420-6310	SHIM	HS	10″
047390G000-1002	GLAND	JC	3X4-11
048155G010-1228	IMPELLER 3 VANE, (MD:34″)	12 CK
048824G000-1002	LINER, SUCTION	JC	3X4-11
048824G000-1228	LINER, SUCTION	JC	3X4-11
048824G000-1245	SUCTION LINER	JC	3X4-11
048824G000-1247	LINER, SUCTION	JC	3X4-11
048825G000-1247	SUCTION COVER	JC	3X4-11
048833G000-1002	DEFLECTOR	JC	3X4-11
048834G000-2206	SHAFT	JC
048834G000-2229	SHAFT	JC
048860G000-1000	IB END COVER	JC	3X4-11
048877G000-1247	STUFFING BOX COVER	JC
048923G000-1247	SUCTION COVER	JC	1X1.5-8
048928G000-1002	SUCTION COVER	JC	2X3-8
048928G000-1228	SUCTION COVER	JC	2X3-8
048928G000-1245	SUCTION COVER	JC	2X3-8
048928G000-1247	SUCTION COVER	JC	2X3-8
048932G000-1002	SUCTION COVER	JC	3X4-14, 3J
048933G000-1228	SUCTION COVER	JC	4X6-14
048933G000-1245	SUCTION COVER	JC	4X6-14
048933G000-1247	SUCTION COVER	JC	4X6-14
048934G000-1204	LINER, SUCTION COVER	JC	1X1.5-8
048934G000-1245	SUCTION LINER	JC	1X1.5-8
048934G000-1247	LINER, SUCTION, COVER	JC	1X1.5-8
048935G000-1204	LINER, SUCTION, COVER	JC	1×1.5-11
048935G000-1245	LINER, SUCTION, COVER	JC	1×1.5-11
048935G000-1247	LINER, SUCTION, COVER	JC	1×1.5-11
048936G000-1247	SUCTION LINER	JC	1.5X2-8
048937G000-1247	LINER, SUCTION, COVER	JC	1.5×2-11
048938G000-1245	SUCTION LINER	JC	1.5X2-14
048938G000-1247	SUCTION LINER	JC	1.5X2-14
048939G000-1002	SUCTION COVER LINER	JC	2X3-8
048940G000-1228	LINER, SUCTION	JC	2X3-11
048941G000-1228	LINER, SUCT.	JC	2X3-14
048941G000-1247	LINER, SUCT.	JC	2X3-14
048944G000-1228	SUCTION COVER LINER	JC	4X6-14
048944G000-1245	SUCTION LINER, S/A 55090-006	JC	4X6-14
048944G000-1247	SUCTION LINER	JC	4X6-14
048945G000-1002	STUFFING BOX COVER	JC	2X3-8
048945G000-1204	STUFFING BOX, COVER	JC	COMMON
048945G000-1245	STUFFING BOX, COVER	JC	COMMON
048945G000-1247	STUFFING BOX, COVER	JC	COMMON
048945G000-1286	STUFFING BOX COVER	JC	COMMON
048946G000-1216	STUFFING BOX COVER	JC	14″
048946G000-1228	STUFFING BOX COVER	JC	14″
048967G000 2217	SLEEVE (FRM 1), (O.D. 1.875″)	JC	COMMON
048967G000 2229	SLEEVE (FRM 1), (O.D. 1.875″)	JC	COMMON
048967G000-2230	SHAFT SLEEVE	JC
048967G100-6956	SHAFT SLEEVE	JC
048969G000-2217	SHAFT SLEEVE	JC	COMMON
048978G000-1002	GLAND	JC
048978G000-1245	GLAND	JC	FRM 1J
049000G000-1000	FRAME	JC
049023G000-1002	DEFLECTOR	JC	3X4-14
049033G000-1000	OB BEARING HOUSING	JC	COMMON
049034G000-1000	BEARING HOUSING	JC	3X4-14
049620G000-2206	SHAFT	JC
049620G000-2229	SHAFT	JC	2X3-8
049621G000-2206	SHAFT	3JC-14
049621G00-2358	SHAFT	4JC-14
049748G020-5156	SEAL RING	JC	3X4-11
049751G040-5138	GASKET	JC	3X4-11
050288G000-2358	SHAFT	JC	6X6-14HS
050340G000-2217	SLEEVE	JC	6X6-14HS
050385G000-1247	SUCTION COVER	JC	1X1.5-11
050386G000-1247	SUCTION COVER	JC	1.5X2-11
050388G000-1247	SUCTION COVER	JC	2X3-14
050529G010-2222	SLEEVE	SEAF
050625G000-1228	LINER, SUCTION, COVER	JC	8X10-18
052654G000-5140	IMPELLER	LB	4X6-14
054291G020-5159	LANTERN RING	JC	3X4-14
054291G050-5159	LANTERN RING	JC
054291G060-5159	SEAL CAGE	JC	3X4-11
054291G070-5159	LANTERN RING	HS	18″
054291G080-5159	LANTERN RING	LB	4X6-14
054291G110-5159	LANTERN RING	HS	22″
054291G130-5159	LANTERN RING	SEAF
054878G010-1000	BEARING HOUSING, (BOTTOM)	SEAF	24X24-24
054878G020-1000	BEARING HOUSING, (TOP)	SEAF	24X24-24
054890G000-6310	SHIM SET	SEAF	24X24-24
054890G003-6310	SHIM	SEAF	24X24-24
056008G920-1245	IMPELLER NUT	HS	3M
056008G930-2217	SLEEVE	HS	6X6-18
056008G930-2229	SLEEVE	HS/VHS
056008G940-1002	CASING	HS	4X4-12
056008G940-1216	CASING	HS	4X4-12
056008G940-1228	CASING	HS	4X4-12
056008G940-1245	CASING	HS	4X4-12
056008G950-1228	IMPELLER	HS	4X4
056008G950-1245	IMPELLER	HS	4X4
056008G960-2206	SHAFT	HS
056009G330-1228	IMPELLER	HS	6X6-18
056009G330-1245	IMPELLER (MD: 18.00″)	HS/VHS	6X6-18
056009G350-1228	CASING	HS	3X3-10
056009G350-1245	CASING	HS	3X3-10
056009G350-1247	CASING	HS	3X3-10
056009G510-1245	IMPELLER	HS	8X8-22
056009G520-1245	IMPELLER NUT	HS
056009G530-2217	SLEEVE	HS	22″
056009G550-1245	IMPELLER NUT	HS
056009G560-1228	SLEEVE	HS	3X3-10
056009G560-2217	SLEEVE	HS	3X3-10
056009G560-2370	SLEEVE	HS	3X3-10
056009G810-2206	SHAFT	HS	8X8-22
056009G810-2358	SHAFT	HS	10×10-26
056010G030-2206	SHAFT	HS
056010G030-2358	SHAFT	HS	3X3-10
056024G340-1002	STUFFING BOX, COVER	HS	6X6-12
056024G340-1216	STUFFING BOX, COVER	HS	6X6-12
056024G340-1228	STUFFING BOX, COVER	HS	6X6-12
056024G340-1245	STUFFING BOX COVER	HS	6X6-12
056024G590-1002	CASING	HS	6X6-12
056024G600-1002	IMPELLER	HS	6X6-12
056024G600-1216	IMPELLER	HS	6X6-12
056024G600-1228	IMPELLER	HS	6X6-12
056024G600-1245	IMPELLER	HS	6X6-12
056026G700-1000	END COVER	SEAF	24X24-24
056026G830-1216	STUFFING BOX COVER	HS	3X3-10
056026G830-1228	STUFFING BOX, COVER	HS	3X3-10
056026G830-1245	STUFFING BOX, COVER	HS
056026G830-1286	STUFFING BOX, COVER	HS	3X3-10
056027G020-1002	IMPELLER	HS	3X3-10
056027G020-1216	IMPELLER	HS	3X3-10
056027G020-1245	IMPELLER	HS	3X3-10
056028G080-1228	STUFFING BOX CVR, (HC600)	HS	6X6-18
056028G080-1286	STUFFING BOX CVR	HS	6X6-18
056028G090-2206	SHAFT	HS	18″
056028G230-1245	STUFFING BOX COVER	VHS	6X6-18
056046G980-1000	HOUSING	3VJC11
056064G340-2206	SHAFT	VHS	6X6-18
056086G960-2358	SHAFT	LB	4X6-14
056089G750-1240	RING, SUCTION, COVER	MFD	30X30-27125
056089G780-1240	SLEEVE	MFD	30X30-27125
056100G160-1002	IMPELLER	JC	3X4-11
056107G490-5140	LINER, SUCT, SIDE CASING	LB	4X6-14
056107G500-5140	LINER S.BOX SIDE CASING	LB	4X6-14
056141G610-2156	SHAFT SLEEVE	AF/MPAF	10X10-10
056144G340-1240	IMPELLER RING	MFD	30X30-27125
056166G920-1247	IMPELLER	JCU	8X8.5-18
056185G140-1228	IMPELLER	JC	4X6-14
056185G140-1245	IMPELLER	JC	4X6-14
056185G140-1247	IMPELLER	JC	4X6-14
056185G180-1228	CASING	JC	4X6-14
056185G180-1245	CASING	JC	4X6-14
056185G180-1247	CASING	JC	4X6-14
056185G400-1245	CASING	JC	3X4-11
056185G400-1247	CASING	JC	3X4-11
056185G410-1245	EXPELLER	JC	3X4-11
056185G420-1245	IMPELLER	JC	3X4-11
056185G420-1247	IMPELLER	JC	3X4-11
056185G42A-1228	IMPELLER	JC	3X4-11
056185G441-1245	STUFFING BOX COVER, (EXPELLER)	JC	3X4-11
056185G470-1204	IMPELLER	JC	1X1.5-11
056185G470-1228	IMPELLER, HC600	JC	1X1.5-11
056185G470-1245	IMPELLER, (MD: 11.00″)	JC	1X1.5-11
056185G470-1247	IMPELLER	JC	1X1.5-11
056185G47A-1247	IMPELLER	JC	1X1.5-11
056185G510-1204	CASING	JC	1X1.5-11
056185G510-1245	CASING	JC	1X1.5-11
056185G510-1247	CASING	JC	1X1.5-11
056185G510-1247A	CASING	JC	1.5X2-11
056185G860-1228	IMPELLER	JC	8X10-18
056188G760-2156	SHAFT	AF/MPAF	10X10-10
056189G250-1245	IMPELLER	JC	1.5X2-14
056189G260-1228	IMPELLER	JC	2X3-11
056189G690-1204	IMPELLER	JC	1X1.5-8
056189G690-1245	IMPELLER	JC	1X1.5-8
056189G690-1247	IMPELLER	JC	1X1.5-8
056189G710-1002	CASING	JC	1X1.5-8
056189G710-1204	CASING	JC	1X1.5-8
056189G710-1228	CASING	JC	1X1.5-8
056189G710-1245	CASING	JC	1X1.5-8
056189G710-1247	CASING	JC	1X1.5-8
056189G840-1245	IMPELLER	JC	1.5X2-8
056189G840-1247	IMPELLER	JC	1.5X2-8
056189G960-1245	IMPELLER, (MD:	JC	1.5X2-11
056189G96A-1247	IMPELLER	JC	1.5X2-11
056189G980-1247	CASING	JC	1.5X2-11
056190G300-1002	IMPELLER	JC	2X3-8
056190G300-1245	IMPELLER	JC	2X3-8
056190G320-1002	CASING	JC	2X3-8
056190G320-1228	CASING	JC	2X3-8
056190G320-1245	CASING	JC	2X3-8
056190G320-1247	CASING	JC	2X3-8
056190G660-1228	CASING	JC	2X3-14
056190G660-1245	CASING	JC	2X3-14
056190G670-1228	IMPELLER	JC	2X3-14
056190G670-1245	IMPELLER	JC	2X3-14
056190G670-1247	IMPELLER	JC	2X3-14
056190G790-1002	IMPELLER	JC	3X4-14
056190G790-1228	IMPELLER	JC	3X4-14
056190G790-1247	IMPELLER	JC	3X4-14
056191G080-1228	IMPELLER	JC	6X6-14HS
056191G310-1228	IMPELLER	JC	6X6-14LS
056191G310-1228	IMPELLER	JC	6X6-14LS
056191G31A-1228	IMPELLER	JC	6X6-14
056210G820-2229	SHAFT	SEAF	24X24-24
065941-1103	IMPELLER, W/RINGS	3460	12X14
066988-1001	BRG END COVER, COUPLING	3450
068445-1102	GLAND ASSEMBLY, PLAIN TYPE	3655/75	1.25X1.5-5
069989-1102	GLAND STUFFBOX, QUENCH TYPE	3316-	COMMON
070017-1001	GLAND S.B, QUENCH TYPE	3405	4X6-11
070017-1102	GLAND S.B, QUENCH TYPE	3405	4X6-11
070081-1001	GLAND-STUFFING BOX, QUENCH TYPE	3405	COMMON
070081-1102	QUENCH GLAND	3405	COMMON
070843-1001	DEFLECTOR	3199	1X1.5-6
071448-1203	GLAND S.B, QUENCH TYPE	3316	6X8-17
071451-1203	GLAND, QUENCH	3405	COMMON
071995-1001	SPLIT GLAND	3138
071995-1101	SPLIT GLAND	3138
072007-11-1203	IMPELLER W/RINGS, FLASHED FOR WW	3405	8X10-12G
072007-15-1203	IMPELLER, W RINGS, FLASHED FOR WW	3405	8X10-14
072007-37-1203	IMP. W/RINGS, FLASH FOR WW	3405	5X8-14DV
072148-1203	SPLIT GLAND	3138	M+MX
072208-1203	SPLIT GLAND	3138	COMMON
072302-2-1001	HOUSING,COOLED, THRUST BEARING	3404	8X10-17G
072531-14-8683	SIGHT OILER	3175	& 3196 XLT
072531-19-8683	SIGHT OILER	3175	& 3420 S
072531-28-8683	SIGHT OILER	3316	1.5X2-9
072531-5-8683	CONSTANT LEVEL, OILER (4 oz)	3196
073201-1001	STUFFING BOX, SPLIT GLAND	3199	1X1.5-6
073716-1203	GLAND,QUENCH	3196
073716-1204	GLAND, QUENCH	3196
074567-1119	GLAND	3735/36	COMMON
075744-1001	DEFLECTOR	3175	COMMON
075745-1001	DEFLECTOR	3175	COMMON
075745-1203	DEFLECTOR	3175	COMMON
075746-1001	DEFLECTOR	3175	COMMON
075765-1001	GLAND – PACKED BOX	3175
075765-1101	GLAND -PACKED BOX	3175
075767-1001	GLAND – PACKED BOX	3175
075769-1001	GLAND, PACKED BOX	3175
075770-1203	GLAND,PACK BOX	3175	COM
075946-1203	GLAND PACKED, BOX	3415	16X18-18
075951-1203	GLAND, PACKED	3415	18X20-22H
076570-1203	GLAND	3196	COMMON
76774	GLAND, (PACKING)	3196	COMMON
076781-1203	ST BOX COVER NON-JACKETED, STD BORE	3196	1X1.5-6
076793-1203	IMPELLER W/TEFLON O-RING, 5 VANE	3196	1X1.5-8
077159-1203	FLUSH GLAND, J.C. TYPE 1	3196	COMMON
077159-1204	GLAND, MECH SEAL, 680 SEALOL (STD BORE)	3196
077192-1203	FLUSH GLAND, STD BORE, JC TYPE 1, SINGLE	3196
077408-1204	FLUSH GLAND,DURA, STD BORE	3196
079-24-3-1101	IMPELLER, WITH IMP RINGS	3405	5X8-12G
080-168-21-1203	IMPELLER	3405	6X8-12G
082-201-2-1000	IMPELLER, 9.75″ DMX	3735	2X3-9
082-202-2-1000	IMPELLER	3736	3X4-9
083-105-2-1203	IMPELLER W/ RINGS	3735	4X6-7
083-106-2-1203	IMPELLER, WITH RING	3735	1X1.5-8
083-1072-1203	IMPELLER, 9.75″ DMX	3735	2X3-9
083-108-2-1203	IMPELLER, WITH RINGS	3735	3X4-9
083-16-2-1152	IMPELLER	3736	4X6X11-GBV
088-83-1102	IMPELLER,, SUC. DMX:9.75″	3360	4″ 4 STG
088-85-1102	IMPELLER, DIS., DMX: 9.75″	3360	4″ 4 STG
090407-23-1203	IMPELLER, 6 VANES	3196	4X6-13
090407-27-1203	IMPELLER, (MAX DIA)	3196	3X4-10H
090407-30-1203	IMPELLER	3196	6X8-15
090407-31-1203	IMPELLER	3196	8X10-15G
090407-43-1203	IMPELLER, DIA: 12.875″	3196	8X10-13
090407-44-1203	IMPELLER	3196	4X6-10H
090407-7-1203	IMPELLER	3196	3X4-10
090773-63-1203	IMPELLER	3180	10X12-16
090775-58-1203	IMPELLER	3180	6X8-12
090775-60-1203	IMPELLER	3180	8X8-14
09077561-1203	IMPELLER	3185	8X10-16
090775-61-1203	IMPELLER, 5V W, TEFLON O-RING	3185	420X405MM
090775-61-1203	IMPELLER, 5V W, TEFLON O-RING	3185	420X405MM
090775-62-1203	IMPELLER	3180	10X10-14
090775-63-1203	IMPELLER	3180	10X12-16
090775-64-1203	IMPELLER	3180	10X12-19
090775-66-1203	IMPELLER	3180	12X14-19
090775-67-1203	IMPELLER-OPEN W/ O’RING, 5 VANE (M.D. 22.52″)	3180	12X14-22
090775-69-1203	IMPELLER	3180	14X16-22
090775-70-1203	IMPELLER	3180	16X16-19
0A01190A02-6504	VALVE, VENT	3415	COMMON
0A03769AG-3201	GUARD, CPLNG ASSY	3180
0B00139A	SUCTION TAIL PIPE, ASSY W/SUCTON STRAINER	3171NM	1X1.5-6
0B00161A-1220	IMPELLER W/O’RING	3196	1X2-10
0B00181A01-1101	DEFLECTOR-THRUST-6TH	3700	1.5X3-13
0B00181A03-1101	BRZ DEFLECTOR-THRUST-6TH	3700	3X4-16L
0B00181A04-1101	DEFLECTOR, RADIAL	3700	3X4-16L
0B02052A01-1101	DEFLECTOR, THRUST, 7th ED.	3700	4X6-13
0B02052A02-1101	DEFLECTOR, RADIAL, 7th ED.	3700	4X6-13
0B02052A03-1101	DEFLECTOR-THRUST, 7TH EDITION	3700	6X8-13A
0B02052A04-1101	DEFLECTOR-RADIAL	3700	6X8-13A
0B02056A03-6470	COLUMN BRG ASSY (INCL: BRG, HOLDER, STEADY)	3171NM
0B02082A-1220	IMPELLER	3196	1X1.5-6
0B02236A02-1203	GLAND	3196	COMMON
0B03049A01-9166	IMPELLER W/RINGS	3620	10X12-22
0B03155A02-3130	OIL THROWER	3700	4X6-13
0B03155A033130	OIL THROWER	3700	4X6-16
0B10009-1203	IMPELLER W/TEFLON O-RING, 5 VANES	3185S	3X6-14
0B10176-1203	IMPELLER W/TEFLON O-RING, 6 VANE	3196	2X3-6
0B10542-1216	IMPELLER, W/O-RING	3796	3X4-13
0B10591-1013	IMPELLER – 6 VANES, W/TEFLON O-RING	3196	3X4-13
0B10896-6306	IMPELLER	3333	CB5-18
0C00010A-1220	IMPELLER, 6 VANES	3196	3X4-13
0C00085A-6303	IMPELLER	3333	CB10-18
0C00127A12-2149	SHAFT, 12 STAGES	3335	HDB 210-12
0C00262A02-1203	IMPELLER	3196	3X4-10H
0C00275A-6944	IMPELLER	3198	1.5X3-7
0C00277A01-6944	IMPELLER	3198	1.5X3-10
0C00277A03-6944	CS IMPELLER 8-7.25″	3198	1.5X3-10
0C00277A04-6944	IMPELLER	3198	1.5 X 3 X 10
0C00279A01-6944	CS IMPELLER	3198	3X4-10
0C00279A02-6944	IMPELLER – 8.375″ DIA.	3198	3X4-10
0C00279A03-6944	CS IMPELLER	3198	3X4-10
0C00279A04-6944	CS IMPELLER, 7-6IN. DIA.	3198	3X4-10
0C01222A01-6929	IMPELLER W/O-RING &, ANTI-ROTATION PIN	3171NM	1X1.5-6
0C01222A-6929	IMPELLER W/O-RING, (MD: 6.0625″)	3196NM	1X1.5-6
0C01223A-6929	IMPELLER W/ O’RING, (MD: 6.0625″)	3196NM	1.5X3-6
0C01225A01-6929	IMPELLER W/O-RING &, ANTI-ROTATION	3171NM	1.5X3-8
0C01290A01-1001	DEFLECTOR	3420	30X30X31
0C01290A02-1001	DEFLECTOR	3420	30X30-31
0C0130A-1220	IMPELLER W/TEFLON O RING	3196	2X3-10MTX
0C01359A-1203	MECH SEAL FLUSH GLAND, DURA TYPE CBR BIG/TAPER BORE	3196
0C01360A-1203	MECH SEAL FLUSH GLAND, DURA TYPE CBR BIG/TAPER BORE)	3196
0C02427A-1203	IMPELLER, OPEN 5V, (MD: 420X405mm)	3180	8X10-16
0C02427A-1216	OPEN IMP (5V), W/TEFLON O-RING	3180	8X10-16
0C02428A-1203	IMPELLER, OPEN 5 VANE, (MD: 420mm)	3180	6X10-16
0C02428A-1216	IMPELLER,5V W/, TEFLON O-RING	3180	6X10-16
0C02524A-1203	IMPELLER-5V OPEN, (MD: 420mmX380mm)	3180	10X12-16
0C02547A02-9931	SIDEPLATE	3180	6X10-16
0C02552A-1203	IMPELLER, OPEN, 5 VANE	3180-3185	16X16-19
0C02562A-1203	IMPELLER, OPEN 5 VANE, (MD: 420mm)	3180	6X8-16
0C02572A-1203	IMPELLER-OPEN 5VANE, W/TEFLON O-RING	3180/3185	14X14-16
0C02574A01-9250	SIDEPLATE, SUC	3180	8X10-16
0C02574A02-9931	SIDEPLATE, SUC, W/ VITON ORING	3180	8X10-16
0C02577A-1203	OPEN IMP, W/TEFLON ORING	3180	12X12-14
0C02580A-1203	IMPELLER, OPEN 5V, (MD:572mmX520mm)	3180	14X16-22
0C02580A-1216	IMPELLER, OPEN – 5VANE	3180	14X16-22
0C02686A-6929	IMPELLER W/O, RINGS	3196NM	3X4-10 H
0C02705A-1203	IMPELLER OPEN (M.D. 19.00″)	3180	4X6-19
0C02705A-1216	IMPELLER	3180	4X6-19
0C02706A-1216	SIDEPLATE	3180	4X6-19
0C02709A-1203	IMPELLER, OPEN 5 VANE, (MD: 305mmX280mm)	3180	8X8-12
0C02712A-1203	IMPELLER 5VANE, (MD: 355mmX325mm)	3180	10X10-14
0C02712A-1233	IMPELLER	3180	10X10-14
0C02714A-1203	IMPELLER, 5V (MD: 305mm)	3180	4X6-12
0C02728A-1203	IMPELLER, OPEN, 5V	3180	6X8-12
0C02730A-1203	IMPELLER-OPEN, 5 VANE (MD: 355mm)	3180	6X8-14
0C02730A-1209	IMPELLER-OPEN, 5 VANE	3180	6X8-14
0C02730A-1247	IMPELLER-OPEN, 5 VANE	3180	6X8-14
0C02731A-1203	SIDEPLATE	3180	6X8-14
0C02731A-1216	SIDEPLATE	3180	6X8-14
0C02732A-1203	IMPELLER-OPEN W/O’RING, 5 VANE (M.D. 22.52″)	3180	12X14-22
0C02736A-1203	IMPELLER, 5V (MD: 355mm)	3180	4X6-14
0C02736A-1216	IMPELLER 5 VANE	3180	4X6-14
0C02741A-1203	IMPELLER, OPEN, (MD: 356X345mm)	3180	8X8-14
0C02742A02-1203	SUCION SIDEPLATE	3180	8X8-14
0C02742A02-1216	SIDEPLATE	3180	8X8-14
0C02744A-1203	IMPELLER- 4V OPEN, (MD: 572mm)	3180	6X10-22
0C03014A-1203	IMPELLER, 5V OPEN, (M.D: 305mm)	3180/3185	3X6-12
0C03021A-1203	IMPELLER, 5V (MD: 635mm)	3180	10X14-25
0C03024A-1203	IMPELLER-OPEN W/O’RING, 5 VANE (M.D. 483mm)	3180	8X10-19
0C03024A-1216	IMPELLER, OPEN 5V	3180	8X10-19
0C03025A01-9250	SIDEPLATE, SUC, W/ VITON ORING	3180	8X10-19
0C03026A-1203	IMPELLER-OPEN, 4V, (MD: 483mm)	3180-3185	6X10-19
0C03029A-1203	IMPELLER, 4 VANE	3180	8X10-22
0C03032A-1203	IMPELLER, OPEN, 5V, (MD: 483X470mm)	3180	10X12-19
0C03032A-1216	IMPELLER, 5V	3180	10X12-19
0C03034A-1203	IMPELLER, 4 VANE (MD: 14.00″)	3180/3185	3X6-14
0C03034A-1216	IMPELLER, 5 VANE	3180	3X6-14
0C03035A02-9931	SIDEPLATE,, SUCTION	3180	3X6-14
0C03036A-1203	IMPELLER	3180	4X8-19
0C03036A-1203	IMPELLER	3180	4X8-19
0C03038A-1203	IMPELLER, OPEN, 5V, (MD: 572mm)	3180	10X12-22
0C03045A-1203	IMPELLER	3180	6X10-25
0C03047A-1216	IMPELLER, OPEN W/O’RING, 4 VANE	3180	8X12-25
0C03060A-1203	IMPELLER, OPEN, (M.D. 572X505mm)	3180	18X18-22
0C03092A-1203	IMPELLER -ENCLOSED, 5-VANE	3180	6×8-14
0C03102A-1203	IMPELLER – ENCLOSED, W/IMP. RING 4V ( M.D. 19.02″)	3180	4X8-19
0C03120A07-1000	STUFFING BOX COVER	3180	10X10-14
0C03124A-1203	IMPELLER, 4 VANE	3180	4X6-16
0C03147A-1000	STUFFING BOX COVER, STD FLUSH TAP	3180	19″
0C03158A-1000	S.B. COVER,STD, FLUSH-PACKING	3180	3X6-12
0C03160A-1000	STUFFING BOX COVER	3180	16″
0C03180A-1216	STUFFING BOX COVER, DYN. SEAL	3180	16″
0C03183A-1203	STUFFING BOX COVER, 4-HOLE	3180	19″
0C03186A-1203	STUFFING BOX, COVER (STD)	3180	22″
0C03187A-1000	STUFFING BOX COVER, (DYN SEAL), 1 HOLE	3180	19 “
0C03187A-1203	S.B. COV.(DYN SEAL), 1 HOLE	3180	19 “
0C03206A-1000	STUFFING BOX, COVER	3185	16″
0C03207A-1000	STUFFING BOX COVER, , FLUSH TAPS	3180	19″
0C03208A-1000	STUFF BOX COVER	3180	22″
0C03240A-1000	STUFFING BOX COVER-STD, (PACKING)	3180	19″
0C03250A-1203	STUFFING BOX, COVER,STD FLSH	3180	12″
0C03250A-1216	STUFFING BOX, COVER,STD FLSH	3180	12″
0C03251A-1203	STUFFING BOX, CVR, STD FLUSH	3180-3185	3X6-14
0C03252A-1203	STUFFING BOX COVER	3180	4X6-16
0C03253A-1203	STUFFING BOX, COVER,STD FLSH	3180	14″
0C03253A-1209	STUFFING BOX, COVER,STD FLSH	3180	14″
0C03253A-1233	STUFFING BOX, COVER STD FLSH	3180	10X10-14
0C03255A-1203	STUFFING BOX COVER	3180	19″
0C03256A-1203	STUFFING BOX COVER	3180-3185	16 “
0C03257A-1203	STUFFING BOX COVER	3180-3185	19″
0C03258A-1203	STUFFING BOX, COVER	3180	22″
0C03259A-1203	STUFFING BOX, COVER	3180-3185	19″
0C03325A-1000	STUFFING BOX COVER, 4-HOLE	3180	19″
0C03374A-1203	IMPELLER, 4 VANE	3180-3185	3X6-14
0C03383A01-9949	FOLLOWER, W/ BUNA O’RING	3180
0C03383A02-9949	FOLLOWER, SEAL, w/ O-RING	3180
0C03383A03-9949	FOLLOWER, SEAL	3180
0C03383A04-9949	FOLLOWER,W/O’RING, DYN. SEAL	3180
0C03393A-1203	IMPELLER (MD: 12.75″)	3196LF	1.5X3-13
0C03394A-1203	IMPELLER W/O’RING, (MD: 8.00″)	3196 LF	1X1.5-8
0C03394A-1209	IMPELLER W/TEFLON O’RING	3196	1X1.5-8
0C03394A-1209X	IMPELLER W/TEFLON O’RING	3196 LF	1X1.5-8
0C03394A-1216	IMPELLER W/TEFLON O’RING	3196 LF	1X1.5-8
0C03394A-2205	IMPELLER, W/TEFLON ORING	3196 LF	1X1.5-8 STX
0C03401A-1203	IMPELLER	3180	6X8-12
0C03485A-1220	IMPELLER	3196	2X3-8
0C03488A-1203	IMP. W/TEFLON, O-RING	3196 LF	1X2-10
0C03491A-1203	IMP. W/TEFLON, O-RING	3196 LF	1X2-10
0C03496A-1203	IMPELLER, (MD: 4.49″)	3196 LF	1X1.5-4
0C04413A02-9168	IMPELLER	3620	8X10-13
0C06013A151362	S.B. CVR W/2ND, LAN RING CONN	3181	6X10-19
0D00038A02-1102	IMPELLER, WITH RINGS	3420	16X18-30
0D00039A02-1203	IMPELLER, WITH RINGS	3420	16X18-30
0D00281A07-9436	IMPELLER W/RINGS, STANDARD	3700	4X6-11N
0D00443A01-1000	IMPELLER, 10-7/8″	3700	4X6-11
0D00466A20-1132	IMPELLER- S, W/ONE IMP RING	3700	1.5X3-9
0D00467A07-1220	IMPELLER, W/RINGS	3700	1X2-11AS
0D00467A07-9436	IMPELLER, W/RINGS	3700	1X2-11AS
0D00467A08-1132	IMPELLER, S, W/ RINGS	3700	1X2-11C
0D00605A-1003	CASING	3175	8X8-12
0D01001A13-1000	IMPELLER W/ONE IMP RING	3700	1X2-7
0D01020A01-1000	IMPELLER-S (W/RINGS)	3700	4X6-13
0D01022A07-9436	S-IMPELLER	3700	6X8-13A
0D01028A05-1204	S-IMPELLER, (NO IMP.RINGS)	3700	3X4-16L
0D01028A05-PATTERN	S-IMPELLER, PATTERN CHARGE	3700	3X4-16L
0D01030A07-9436	N-IMPELLER, W/ IMP.RINGS	3700	4X6-16N & 3×4
0D01041A07-9436	IMPELLER-N W/RINGS	3700	10X12-21
0D01042A07-9436	IMPELLER-S W/ RINGS	3700	10X12-21
0D01131A11-1204	STUFF. BOX CVR, W/ S.B.BUSHING	3700	3X4-16L
0D01131A11-PATTERN	STUFF. BOX CVR, PATTERN	3700	3X4-16L
0D01393AS1-9858	CASING (S-IMP), 300# RF	3700	10X12-21 S
0D01536A02-1203	IMPELLER W \ RINGS, 6 VANE	3420	20X24-28
0D02259A02-1203	IMPELLER (6V), W/ RINGS	3420 LDS	30×30-38
0D02273A19-9436	IMPELLER W/, ONE IMP RING	3700	2X4-9/N9
0D02275A01-1000	IMPELLER-N (W/RINGS)	3700	4X6-13
0D02342A02-1101	IMPELLER W/RINGS	3410	8X10-17H
0D02370A02-1203	IMPELLER, W/ RINGS	3420	30×30-31
0D02391A-6929	IMPELLER W/O-RING, GMP-2000	3196 NM	3X4-13
0D02402A01-1101	IMPELLER, LESS RINGS	3410	6×8-17
0D02474A02-1101	IMPELLER W/RINGS	3410	6X8-14H
0D02613A02	IMPELLER	3410	3X4-10
0D02624A02-1000	IMPELLER, W/ RINGS	3410	8X10-11
0D02643A02-1000	IMP. W/RINGS	3410	8X10-21
0D02659A02-1203	IMPELLER, W/ RINGS	3410	6×8-17
0D0265A02-1222	IMPELLER	3410	3X4-10
0D02664A02-1203	IMPELLER W/ RINGS	3410	4X6-15
0D02667A02-1203	IMPELLER W/RINGS, (MD: 14.00″)	3410	8X10-14
0D02671A02-1203	IMPELLER W/RINGS	3410	6X8-14H
0D02691A02-1101	IMPELLER WITH RINGS	3410	4X6-13H
0D02691A02-1203	IMPELLER WITH RINGS	3410	4X6-13H
0D02692A02-1203	IMPELLER WITH, RINGS	3410	4X6-13H
0D02694A02-1203	IMP. W/RINGS	3410	8X10-21
0D02713A02-1000	IMP. W/RINGS, DIA 13.125″	3410	10X12-14
0D03004A02-1000	IMPELLER, W/ RINGS	3410	6X8-22
0D03039A02-1203	IMPELLER WITH RINGS	3410	8X10-17H
0D03043A02-1203	IMP. W/RINGS	3410	10X12-14
0D03047A02-1203	IMPELLER, W/ RINGS	3410	10×12-12H
0D03048A02-1203	IMPELLER, W/ RINGS	3410	12X14-15
0D03777A-1296	STUF. BOX COVER W/O RING, FOR S & N IMP.	3700	1X2-9
0D03782A05-9436	STUFFING BOX COVER, NON-COOL (N-IMP)	3700	16″
0D04563A02-1203	IMPELLER, (MD: 16.75″)	3196	4X6-17
0D04563A02-1209	IMPELLER (M.D. 16.75″), W/ TEFLON O-RING	3196	4X6-17
0D04563A02-1605	IMPELLER	3196	COMMON
0D04563A03-1220	IMPELLER	3196	4X6-17
0D04564A02-1203	IMP. W/TEFLON, O-RING	3196	6X8-17
0D04564A02-1209	IMPELLER, W/TEFLON O-RING	3196	6X8-17
0D04564A02-1233	IMP. W/TEFLON, O-RING	3196	6X8-17
0D04568A01-1013	IMPELLER	3196	8X10-17
0D04568A02-1203	IMPELLER, OPEN, 5V (MD: 16.75″X16″)	3196	8X10-17
0D04569A-1203	IMPELLER, OPEN 5V, (MD: 483X440mm)	3180	12X14-19
0D04569A-1216	IMPELLER 5VO	3180	12X14-19
0D04617A04-1203	CASING WITH TAPS, FOR OPEN IMPELLER	3180	10X14-25
0D04622A03-1003	CASING W/TAPS, FOR OPEN IMP	3180	6X10-19
0D04630A03-1003	CASING,, FOR OPEN IMP	3180	4X8-19
0D04681A02-1203	CASING WITHOUT TAPS, ENCLOSED IMPELLER	3180	4X6-14
0D04724A03-1003	CASING W/TAPS, FOR OPEN IMP	3185	8X10-16
0D04724A03-1203	CASING W/TAPS, FOR OPEN IMP	3185	8X10-16
0D04736A02-1203	CASING W/O TAPS, FOR ENCLOSED IMPELLER	3180	4X8-19
0D04851A-1000	STUFFING BOX COVER	3180	14X16-22
0D04873A-1203	STUFFING BOX COVER, STD.	3180	25″
0D04873A-1216	STUFFING BOX COVER, STD.	3180	25″
0D04874A-1203	STUFFING BOX COVER	3180	22″
0D04874A-1216	STUFFING BOX, COVER	3180	22″
0D04889A-1203	STUFF BOX COVER (4-HOLE), DYN. SEAL	3180	22″
0D04889A-1216	STUFF BOX COVER (4 HOLE), DYN. SEAL	3180	22″
0D04925A-1000	STUFF BOX COVER (4 HOLE), DYN SEAL	3180	22″
0D05511A03-1203	CASING, W/DRAIN 300#, RF FLANGE	3296	3X4-8
0D05517A03-1203	CASE W/DRAIN, 300 #RF	3296	2X3-13M
0D06534AD1-1132	S.B. COVER W/RING FOR S-IMP, W/MECH SEAL	3910	2X4-11
0D06776A01-9803	IMPELLER	3620	8X10-10.5
0D06909A-1041	IMPELLER W/O’RING, (MD: 13.00″)	3196 CV	3×4-13
0D06936A-1041	IMPELLER	3196 CV	2X2-10 MTX
0D07523A-1041	IMPELLER	3196 CV	2X2-10 LTX
0D07525A-1041	IMPELLER W/TEF O-RING, M.D.13″	3196 CV	3×4-13
0D09143A01-9356	IMPELLER	3620	6X8-10.5
0E00141A-1003	CASING, 125# FLG DRLNG	3405	6X8-17DV
0E00144A-1203	CASING, W/BRG HSGS & PEDESTALS, 125# FLG DRLNG	3405	6X8-17DV
0E00171AS1-9488-58062	CASING, W/WEAR RING + PLUG	3700	1.5X3-11
0E00221AS1-1204	CASING, (NO RING)	3700	3X4-16L
0E00221AS1-PATTERN	CASING-, PATTERN	3700	3X4-16L
0E00349A25-1003	CASING, U/L HALF FOR MECH, SEAL APP.	3410	10X12-17
0E00380A21-1003	CASING U/L, FOR PACKED BOX	3410	8X10-12
0E00380A25-1003	CASING U/L, FOR MECH. SEAL	3410	8X10-12
0E00516A21-1203	CASING FOR PKD BOX U/L	3410	6X8-17
0E00517A21-1203	CASING U/L, FOR PACKED BOX	3410	8X10-12
0E00670A-1215	ADAPTER	3296	1X1.5-8
100-134-1000	BEARING FRAME, (OIL)	3196	COMMON
100-134-1001	BEARING FRAME, OIL	3196	3X4-10H
100-149-1001	FRAME FOOT	3196	COMMON
100-225-1203	IMPELLER	3171	2.5X3-11
100-296-1-1102	IMPELLER	3460	14S
100-350-1-1203	IMPELLER	3460	14S
100-353-1-1203	IMPELLER, (NO IMP RINGS)	3460	14 L
100-353-1-1216	IMPELLER, (NO IMP RINGS)	3460	14 L
100-355-1-1203	IMPELLER, 6 VANE	3450	16″
100-488-1203	SUCTION COVER, (WET PIT)	3171	2.5X3-8
100-489-1203	SUCTION COVER, (WET PIT)	3171	4X4-8
100-489-1204	SUCTION COVER, (WET PIT)	3171	4X4-8
100-490-1203	IMPELLER	3171	1.5X2-8
100-491-1203	IMPELLER	3171	2.5X3-8
100-497-1203	IMPELLER, (MD: 8.375″)	3171	4X4-8
100-533-1203	STUFFING BOX, COVER	3196	13″
100-539-1216	IMPELLER	3196	2X3-13
100-557-1013	IMPELLER, 5 VANES	3196	2X3-10
100-590	STUFFING BOX, COVER	3196	10″
100-593-1203	IMPELLER	3196	1.5X3-10
100-593-1204	IMPELLER	3196	1.5X3-10
100-597-1203	IMPELLER	3196	3X4-10
100-597-1216	IMPELLER	3196	3X4-10
100-70-1-1102	IMP (6V)	3450	16″
100-772-1000	CASING FOOT	3198	COMMON
100-773-1000	FRAME FOOT, 8 1/4″ HEIGHT, (MT ONLY)	3196	COMMON
100-773-1001	FRAME FOOT (8 1/4″ HT)	3196
100-773-1203	FRAME FOOT	3196	COMMON
100-842-1000	IMPELLER	3655	4X6-11H
100-842-1101	IMPELLER	3655	4X6-11H
100-842-1216	IMPELLER	3755	4X6-11
100-860-1-1101	IMPELLER	3405	2X3-11
100-860-1-1102	IMPELLER	3405	2X3-11
100-860-1-1203	IMPELLER,, LESS IMP RING	3405	2X3-11
100-860-2-1203	IMPELLER, WITH RINGS	3405	2X3-11
100-908-1-1102	IMPELLER (MD=11 1/2″)	3405	4×6-11
100-908-1-1203	IMPELLER (MD=11 1/2″)	3405	4X6-11
100-961-1-1203	IMPELLER, LESS RINGS	3405	4X6-11
100-961-2-1203	IMPELLER, W/RINGS	3405	4X6-11DV
100-979-1000	IMPELLER	3171	1.5X3-6
100-980-1203	IMPELLER	3171 & 3199	1.5X3-6
100-982-1203	SUCTION COVER	3199T	1.5X3-6T
100-988-1203	IMPELLER	3171	4X6-11 H
10109-32-1101	OIL RING	3420	20X24-28
10109-35-1101	OIL RING	3420	30X30-31
101-187-10-1012	CASING	3196	4X6-13
101-187-11-1012	CASING, 150# RF FLANGES	3196	3X4-10
101-187-27-1203	CASING, 150#RF FLANGES	3196	2X3-10
101-187-27-1216	CASING, 150#RF FLANGES	3196	2X3-10
101-187-28-1203	CASING, 150# RF FLANGES	3196	3X4-10
101-197-2-1000	IMPELLER WITH RINGS, 8.875″ AND 9.825″ DIAM	3735	2X4-11
101-21-1203	SUCTION COVER	3171	1.5X2-11
101-235-1000	BRG HOUSING	3420	20X24-28
101-24-1203	SUCTION COVER	3171	2.5X3-13
101-25-1203	SUCTION COVER, (WET PIT)	3171	3X4-13
101-25-1204	SUCTION COVER, (WET PIT)	3171	3X4-13
101-26-1203	SUCTION COVER	3171	6X8-13
101-28-1203	SUCTION COVER	3171	4X6-11H
101-456-2-1000	IMPELLER W RINGS, DIAM 10.5″	3735	1X2-11
101-603-2-1161	IMPELLER WITH RINGS, DIAM 11.000″	3735	2X4-13
101-604-2-1203	IMPELLER W RINGS, DIAM 11.000″	3735	2X4-13
101-6-1203	IMPELLER	3171	1.5X2-11
101-6-1204	IMPELLER	3171	1.5X2-11
101-7-1203	IMPELLER	3171	3X4-11
101-7-54-1203	IMPELLER	3171	3X4-11
101-785-1001	BEARING END COVER	3415	COMMON
101-786-1001	BEARING END COVER, COUPLING (RNG OIL BALL BRNG)	3415	14X16-18
101-795-1001	BRG HSG CVR	3415
101-8-1203	IMPELLER	3171	2.5X3-13
101-839-1001	BEARING, HSG-THRUST	3316
101-840-1001	BEARING, HSG-CPLG	3316
101-841-1001	BEARING END -, COV THRUST	3316
101-842-1001	BEARING END -, COV-CPLG	3316
101-847-1001	BRG HOUSING-, THRUST	3316/3405	COMMON
101-848-1001	BRG HOUSING, CPLG	3316/3405
101-849-1001	BEARING END, COVER,THRUST	3316
101-850-1001	BEARING END, COVER,COUPLING	3316
101-854-1001	BRG HOUSING-, THRUST (OIL)	3316
101-855-1001	BRG HOUSING-, CPLG (OIL)	3316/3405
101-856-1001	BRG HOUSING-, THRUST (OIL)	3316	COMMON
101-857-1001	BEARING END, COVER,COUPLING	3316&3405	COMMON
101-8-69-1203	IMPELLER	3171	2.5X3-13
101-879-1220	IMPELLER, 6 VANE	3196	4X6-13
101-88-1001	COVER, WATER, JACKET	3735
101-903-1-1000	IMPELLER SUCT., 1ST STAGE	3316	1.5X2-9S
101-903-2-1101	IMPELLER SUCT., 1ST STAGE	3316	1.5X2-9S
101-905-2-1101	IMPELLER SUCT,, 2ND STAGE	3316	1.5X2-9S
101-907-1-1101	IMPELLER L/RINGS, 1ST STG (MD: 9.50″)	3316	2X3-9
101-908-1-1203	IMPELLER, 1ST STAGE	3316	2X3-9
101-909-1-1101	IMPELLER L/RINGS, 2ndSTG (MD: 9.50″)	3316	2X3-9
101-910-1-1203	IMPELLER, 2nd STAGE	3316	2X3-9
101-911-1-1102	IMP,1ST STAGE,, (NO RINGS)	3316	2X3-11
101-911-2-1102	IMP,1ST STAGE,, (WITH RINGS)	3316	2X3-11
101-9-1203	IMPELLER	3171&3189	3X4-13
101-913-1-1102	IMP,2ND STAGE,, (NO RINGS)	3316	2X3-11
101-913-2-1102	IMP,2ND STAGE,, (WITH RINGS)	3316	2X3-11
101-919-1-1101	IMPELLER, 1ST STAGE	3316	4X6-11M
101-920-1-1203	IMPELLER 1ST. STAGE, L/RING	3316	4X6-11
101-921-1-1101	IMPELLER, 2ND STAGE	3316	4X6-11M
101-922-1-1203	IMPELLER 2ND STAGE, L/RING	3316	4X6-11
102-215-1000	BEARING HOUSING,, BALL BEARING ONLY	3415	COMMON
102-216-1001	COVER, BRG HSNG (RNG OIL, SLVE BRGS) – CPLG END	3415	COMMON
102-217-1001	BEARING END COVER, (THRUST)	3415	16X18-22H
102-218-1000	BEARING END COVER, (COUPLING END)	3415	16X18-22H
102-828-1001	THRUST BEARING END COVER	3196	COMMON
102-829-1000	BEARING, HOUSING-OIL LUBE ONLY	3175	COMMON
102-829-1001	BEARING HOUSING	3175	COMMON
102-863-1001	BEARING, HOUSING (OIL)	3175	COMMON
102-864-1000	BEARING, HOUSING	3175
102-865-1001	BEARING END COVER, (OUTBOARD), OIL LUBE	3175	COMMON
102-866-1001	BRG END COVER, OUTBOARD	3175	COMMON
102-867-1001	BRG END COVER (OUTBOARD)	3175
102-868-1001	BRG END CVR, (INBD)	3175	COMMON
102-869-1001	BRG END COVER, INBOARD	3175	COMMON
102-870-1001	BRG END COVER, INBOARD	3175	COMMON
102-999-1001	SUCTION SIDE, PLATE	3175	3X6-14
103-11-1000	SUCTION, SIDEPLATE	3175	10X12-22
103-12-1000	SUCTION SIDE, PLATE	3175	12×14-22
103-13-1000	SUCTION SIDEPLATE	3175	12X14-18
103-15-1000+10	SUCTION PIECE, SIZE 10	3175	4X6/10-14
103-181-1001	FRAME FOOT	3175	14″ & 18″
103-183-1001	FRAME FOOT	3175
103-2-1003	SUCTION SIDEPLATE	3175	4X6-18
103-21-1000+16	SUCTION PIECE	3175	10X16-18
103-4-1003	SUCTION SIDE, PLATE	3175	6X8-18
103-4-1102	SUCTION SIDE, PLATE	3175	6X8-18
103-609-1204	IMPELLER	3196	6X8-13
103-6-1000	SUCTION SIDEPLATE, 2 & 4 VANE IMPELLER	3175	8X10-14
103-612-1203	IMPELLER	3196	8X10-13
103-615-2156	SHAFT, (NO SLEEVE)	3196	COMMON
103-7-1000	SIDEPLATE-SUCTION, 2/4 VANE IMP	3175	8X10-18
103-79	FRAME FOOT	3175	6X8-18
103-79-1001	FRAME FOOT	3175	12″
103-855-1203	SLEEVE,SHAFT	3420	30X30-31
103-87-1001	FRAME FOOT	3175	COMMON
104-14618	IMPELLER	3196	4X6-10
104-14625-1204	IMPELLER W/O’RING, 5 VANES	3196	3X4-10
104-164-1203	SUCTION PIECE, SIZE 8	3175	3×6-14S
104-165-1000+10	SUCTION PIECE, SIZE 10	3175	4X6/10-18
104-165-1203+10	SUCTION PIECE, SIZE 10	3175	4×6/10-18
104-176-3201	FRAME FOOT	3735	COMMON
104-184-1000	ADAPTER (STD.)	OR3171	3X4-13
104-207-8-2216	SHAFT	3171	1.5X2-11
104-208-10-2216	SHAFT	3171	3X4-13
104-208-5-2216	SHAFT	3171
104-208-6-2216	SHAFT, ASSY 11 & 12, 7-7 1/2 FT	OR3171
104-232-1203	CASING	3171	1X1.5-8
104-292-1203	SUCTION, SIDEPLATE	3175	10X12-22
104-292-1209	SUCTION, SIDEPLATE	3175	10X12-22
104-292-1216	SUCTION, SIDEPLATE	3175	10X12-22
104-348-01-1101	IMPELLER	3415	16X18-22H
104-35-1203	SUCTION SIDE PLATE	3175	3X6-14
104-35-1216	SUCTION SIDE, PLATE	3175	3X6-14
104-36-1203	SUCTION SIDE PLATE	3175	4X6/10-14
104-36-1216	SUCTION SIDE, PLATE	3175	4X6-14
104-37-1203	SIDEPLATE	3175	4X6/10-18
104-37-1216	SIDEPLATE	3175	4X6-18
104-38-1203	SUCTION SIDE, PLATE	3175	6X8/12-14
104-38-1216	SUCTION SIDE, PLATE	3175	6X8/12-14
104-410-1203	SUCTION, SIDEPLATE	3175	14X14-18
104-410-1216	SUCTION, SIDEPLATE	3175	12X14-18
104-411-1203	SUCTION, SIDEPLATE	3175	12X14-22
104-411-1216	SUCTION, SIDEPLATE	3175	14X14-22
104-421-1012	CASING	3196	1X1.5-6
104-422-1012	CASING	3196	1.5X3-6
104-423-1012	CASING	3196	1X1.5-8
104-433-1000	BEARING HSG	3196	COMMON
104-436-1101	DIAPHRAM	3316	COMMON
104-436-1104	DIAPHRAGM	3316	2X3-11
104-436-1203	DIAPHRAGM	3316	2X3-11
104436-5445	DIAPHRAGM	3316	4X6-11HG
104-437-1203	DIAPHRAM	3316	4X6-11
104-439-1203	SUCTION SIDE, PLATE	3175	6X8/12-22
104-439-1216	SUCTION SIDE PLATE	3175	6X8-22
104-440-1203	SUCTION SIDE PLATE, 2&4 VANE IMP	3175	8X10-14
104-440-1216	S.SIDEPLATE, 2&4 VANE IMP	3175	8X10-14
104-441-1203	SUCTION SIDE (2V-4V IMP), PLATE	3175	8X10/14-18
104-441-1204	SUCTION SIDE, PLATE	3175	8X10/14-18
104-441-1209	SUCTION SIDE, PLATE	3175	8X10/14-18
104-441-1216	SUCTION SIDE PLATE, FITS 2 OR 4 VANE IMPELLER ONLY	3175	8X10-18
104-442-1203	SUCTION SIDE, PLATE	3175	8X10-18H
104-442-1216	SUCTION SIDE, PLATE	3175	8X10-18H
104-443-1203	SUCTION SIDE, PLATE	3175	8X10-22
104-443-1209	SUCTION SIDE PLATE	3175	8X10/14-22
104-443-1216	SUCTION, SIDEPLATE	3175	8X10/14-22
104-444-1203	SUCTION SIDE, PLATE	3175	10X12-18
104-444-1216	SUCTION SIDE, PLATE	3175	10X12-18
104-447-1203+16	SUCTION PIECE	3175	10X12/16-18
104-448-1013	DIAPHRAGM	3316	8X10-17
104-449-1203	DIAPHRAM	3316	6X8-17
104-554-1203	CASING	3196	1×1.5-6
104-554-1204	CASING	3196	1×1.5-6
104-554-1215	CASING	3196	1×1.5-6
104-554-1216	CASING	3196	1×1.5-6
104-555-1203	CASING	3196	1.5×3-6
104-555-1204	CASING	3196	1.5×3-6
104-555-1216	CASING	3196	1.5×3-6
104-556-1203	CASING	3196	1×1.5-8
104-556-1204	CASING	3196	1×1.5-8
104-556-1216	CASING	3196	1×1.5-8
104-557-1203	CASING	3196	1.5X3-8
104-557-1204	CASING	3196	1.5×3-8
104-557-1216	CASING	3196	1.5×3-8
104-598-1203	SUCTION SIDE, PLATE	3175	6X8/12-18
104-598-1204	SUCTION SIDE, PLATE	3175	6X8/12-18
104-598-1216	SUCTION SIDE, PLATE	3175	6X8/12-18
104-724-1-1203	IMPELLER-23.5″	3415	16X18-22H
104-729-1000	BEARING HOUSING	3196	3X4-10H
104-729-1001	BEARING HSG., (OIL LUBE)	3196	COMMON
104-826-6956	SHAFT SLEEVE	3420	20X24-26
104-878-1203	CASING	3196	1X2-10
104-878-1204	CASING	3196	1X2-10
104-878-1209	CASING	3196	1X2-10
104-878-1216	CASING	3196	1X2-10
104-878-1217	CASING	3196	1X2-10
104-896-1-1000	IMPELLER 1ST STAGE (MD: 11.00″), L/IMP WEAR RINGS	3316	3X4-11H
104-896-1-1101	IMPELLER,1st STG L/IMP. WEAR, RING (MD: 11.00″)	3316	3X4-11H
104-896-2-1101	IMPELLER W/ IMP RINGS	3316	3X4-11H
104-897-1-1000	IMPELLER 2ND STAGE (MD: 11.00″), L/IMP WEAR RINGS	3316	3X4-11H
104-897-1-1101	IMPELLER,2ND STG L/IMP. WEAR, RING (MD: 11.00″)	3316	3X4-11H
104-897-2-1000	IMP-DISCHARGE,, WITH WEAR RING	3316	3X4-11H
104-897-2-1101	IMPELLER, 2ND STAGE, W/ IMP. WEAR RING	3316	3X4-11H
104-898-1203	SIDE PLATE	3175	18X18-22
104-898-1216	SIDE PLATE	3175	18X18-22
104-974-1-1000	IMPELLER	3415	14X16-22H
104-974-1-1101	IMPELLER	3415	14X16-22H
104-974-2-1101	IMP. W/RINGS	3415	14X16-22H
104-995-1-1203	IMPELL,1st STG (MD: 11.0″), L/IMP RING	3316	3X4-11H
104-995-2-1203	IMPELL,1st STG, W/IMP RING	3316	3X4-11H
104-995-3-1203	IMP-1ST STAGE, W/ RINGS	3316	4X6-11HG
104-996-1-1203	IMPELL,2ND STG (MD: 11.0″), L/IMP RING	3316	3X4-11H
104-996-2-1203	IMPELL,2ND STG, W/IMP RING	3316	3X4-11H
104-996-3-1203	IMP-2ND STAGE, W/ RINGS	3316	4X6-11HG
104-997-1000	SUCTION SIDEPLATE, 6 VANE IMPELLER	3175	18X18-22
105-103-1203	SUCTION, SIDE PLATE	3175	14X14-18H
105-103-1209	SUCTION, SIDE PLATE	3175	14X14-18
105-104-1203	IMPELLER 6V	3175	14X14-18H
105-104-1209	IMPELLER, 6 VANES – 18″	3175
105-104-1216	IMPELLER, 6 VANES	3175	14X14-18H
105-127-1220	CASING	3196	1.5×3-6
105-137-1-1203	IMPELLER L/ RINGS, MD: 23.5″	3415	18X20-22H
105-137-2-1203	IMPELLER W/ RINGS	3415	18X20-22H
105-140-1203	IMPELLER, 4 VANES	3175	20X24-28
105-141-1000	SUCTION SIDE, PLATE	3175	20X24-28
105-142-1203	SUCTION SIDE, PLATE	3175	20X24-28
105-149-1-1203	IMPELLER	3415	14X16-22H
105-204-1203	CASING	3196	2×3-6
105-204-1204	CASING	3196	2×3-6
105-204-1216	CASING	3196	2×3-6
106-59-1203	IMPELLER, 6 VANE	3175	20X24-28H
108-66-1203	IMPELLER (MD: 22.5″), 6VANE	3175	14X14-22H
108-99-1203	WEAR RING,CASE	3415S	16X18-18
10K18	MECH SEAL	1ST21012
10K24	MECH SEAL W/ SPRING	1ST21012
10K55	SEAL, MECHANICAL	1ST1H5A3
10K63	SEAL ASSEMBLY	3886
110-01-1203	WEAR RING,CASE, FOR W/IMP RING	3415	16X18-18
110-01-1210	WEAR RING,CASE, FOR W/IMP RING	3415	16X18-18
110-12-21-1203	IMPELLER	3335	HDB 210
110-12-24-1203	IMPELLER	3335	HDB 210-12
110-50-1-1000	BEARING FRAME, (GREASE)	3196	COMMON
110-65-1000	BEARING, HOUSING	3196	COMMON
110-95-1011	IMPELLER, 6 VANES	3175	16X18-22
112-07-1203	WEAR RING-CASE, (NO IMP RING)	3415	12X14-18DV
112-08-1203	WEAR RING-CASE, (FOR IMP W/RG)	3415	12X14-18DV
112-09-1101	RING, CASE	3415	14X16-18
112-10-1007	RING, CASE, W/ IMP. RINGS	3415	14X16-18
112-10-1101	RING, CASE, (W/IMP RINGS)	3415	14X16-18
112-11-1203	RING, CASE	3415	14X16-18
112-12-1203	RING, CASE, W/ IMP RINGS	3415	14X16-18
112-16-1203	WEAR RING,, CASE	3415	10X12-22
112-17-1000	CASE RING	3415	14X16-22H
112-17-1101	CASE RING	3415	14X16-22H
112-18-1101	WEAR RING CASE, (W/ IMP RINGS)	3415	14X16-22H
112-19-1203	WEAR RING CASE	3415	14X16-22H
112-20-1203	WEAR RING CASE, (W/ IMP RINGS)	3415	14X16-22H
112-21-1000	WEAR RING – CASE	3415	16X18-22H
112-22-1000	WEAR RING – CASE FOR, IMPELLER W/RINGS	3415	16X18-22H
112-23-1203	WEAR RING – CASE	3415	16X18-22H
112-24-1203	WEAR RING – CASE FOR, IMPELLER W/RINGS	3415	16X18-22H
112-27-1203	CASE RING	3415	18X20-22H
113-11-1102	WEAR RING CAS, IMP. W/RING	3420	16X18-30
113-20-02-1203	DIFFUSER,, SUCTION	3335	HDB 210-12
113-22-02-1203	IMPELLER,, 1ST STAGE	3335	HDB 210-12
113-24-1203	DIFFUSER	3335	HDB 210-12
113-40-1203	SUCTION SIDE PLATE	3175	16X18-22
113-40-1216	SUCTION SIDE PLATE	3175	16X18-22
113-41-1203	IMPELLER, 6 VANES	3175	16X18-22
113-47-1220	CASING	3196	1X1.5X8
124200E004-1242	SHAFT SLEEVE		10X12-27
146330E000-1228	CASING RING	5000	4X4-18
196-MKS8	MAINTENANCE, KIT	3196	1X1.5-8
1SN1E4A4F	G&L PUMP	NPO	1X1.25-6
1STLF52C	MECHANICAL SEAL	NPE	1X 1 1/4-6
211-121-1-1000	IMP W/O RINGS, 7 VANES	3450	14″
211-121-2-1000	IMP W/ RINGS, 7 VANES	3450	14″
2170-FEHN-6-2227	SHAFT	2IT-FF
228C109SL	MECH. SEAL, RO 2GS-86600	3196
229-112-1103	IMPELLER (STN), LESS RINGS	3460	12X14
235-107-1-1101	IMPELLER	3755	6X6-9
235-107-1-1203	IMPELLER	3755	6X6-9
238-112-1003	CASING,U/L, 125# FLANGE	3405	8X10-14
238-112-1203	CASING,U/L, 125# FLANGE	3405	8X10-14
238-112-1216	CASING,U/L, 125# FLANGE	3405	8X10-14
238-113-1-1102	IMPELLER, (MAX DIA. 12″)	3405	10X12-12
238-21-2229	SHAFT	3405	COMMON
238-44-1-1000	IMPELLER L/RINGS, (MD:	3405	6X8-14GSV
238-44-1-1203	IMPELLER L/RINGS (MD: 14.50″)	3405	6X8-14GSV
238-81-1-1003	IMPELLER, (NO RINGS)	3405	8X10-12G
238-81-1-1102	IMPELLER, (NO RINGS)	3405	6X8-12
238-81-1-1102	IMPELLER, (NO RINGS)	3405	8X10-12G
238-81-1-1102	IMPELLER, (NO RINGS)	3405	8X10-12G
238-81-1-1102	IMPELLER, (NO RINGS)	3405	6X8-12
239-100-1-1101	IMPELLER L/RINGS	3405	3X4-14
239-100-1-1203	IMPELLER L/RINGS	3405	3X4-14
239-20-1-1000	IMPELLER	3405	10X12-17DV
239-36-1003	CASING-UPPER & LOWER HALF	3316	4X6-11HG
239-9-1-1102	IMPELLER, MD:17.00″, (NO RINGS)	3405	8X10-17
239-9-2-1102	IMPELLER, WITH RINGS	3405	8X10-17
240-12-1-1102	IMPELLER	3405	4X6-17
240-13-1-1203	IMPELLER, L/RINGS	3405	3X4-17
242-40-1209	CASING, 125 LB. FLANGE	3405	10X12-12
242-40-1216	CASING, 125 LB. FLANGE	3405	10X12-12
242-43-1-1203	IMPELLER	3405	10X12-12
242-43-1-1216	IMPELLER, L/RINGS	3405	10X12-12
242-47-1-1203	IMPELLER	3405	12X14-14DV
242-47-2-1203	IMPELLER, WITH RINGS	3405	12X14-14DV
242-5-1-1000	IMPELLER, 1st STG	3316	8X10-17
242-7-1-1000	IMPELLER, 2ns STG	3316	8X10-17
243-100-1-1203	IMPELLER, (NO RINGS)	3405	8X10-17
243-100-2-1203	IMPELLER, WITH IMP RINGS	3405	8X10-17
243-101-1-1203	IMPELLER	3405	10X12-17DV
243-101-2-1203	IMPELLER W/, RINGS	3405	10X12-17DV
243-108-1203	IMPELLER	3138	8X10-20
243-1-1-1203	IMPELLER L/ RINGS	3405	8X10-12GDV
243-2-1-1203	IMPELLER, (NO RINGS)	3405	8X10-14DV
243-3-1-1203	IMPELLER, (NO IMP RING)	3405	8X10-14
243-32-1000	BEARING, HOUSING BALL	3171
243-4-1-1203	IMPELLER	3405	10X12-14
243-58-1-1203	IMPELLER, STND.	3405	6X8-17DV
243-58-2-1203	IMPELLER, w/ IMP. RINGS	3405	6X8-17DV
243-58-2-1204	IMPELLER, w/ IMP. RINGS	3405	6X8-17DV
243-58-2-1215	IMPELLER, w/ IMP. RINGS	3405	6X8-17DV
243-72-1018	IMPELLER	3171	8X10-11
243-84-1203	IMPELLER	3171	8X10-11
243-84-1203.	IMPELLER	3189	8X10-11
243-85-1203	SUCTION COVER	3189	8X10-11
243-90-1203	IMPELLER	3171	6X8-13
243-9-1-1203	IMPELLER	3405	4X6-14
243-9-1-1203	IMPELLER	3405	6×8-14G
243-9-1-1203	IMPELLER	3405	6×8-14G
243-9-1-1203	IMPELLER	3405	4X6-14
243-9-2-1203	IMPELLER W/, RINGS	3405	4X6-14
245-57-1203	IMPELLER	3138	10X12-20
246-115-1001	FRAME, GREASE LUBE	3199	1X1.5-6
246-122-1-1203	IMPELLER L/RINGS, (MD: 17.00″)	3405	4X6-17
246-122-2-1203	IMPELLER W/, RINGS	3405	4X6-17
246-91-01-1203	IMPELLER, (NO RINGS) (MD: 14.50″)	3405	8X10-14G
247-35-1203	CASING	3196	2X3-6
247-35-1204	CASING	3196	2X3-6
247-35-1216	CASING	3196	2X3-6
247-41-1203	CASING	3196	2X3-8
247-41-1204	CASING	3196	2X3-8
247-41-1215	CASING	3196	2X3-8
247-41-1216	CASING	3196	2X3-8
247-42-1012	CASE	3196	2X3-8
247-42-1203	CASE	3196	2X3-8
247-43-1203	CASING	3196	3X4-8
247-43-1204	CASING	3196	3X4-8
247-44-1012	CASING	3196	3X4-8
247-45-1203	CASING	3196	3X4-8G
247-45-1204	CASING	3196	3X4-8G
247-45-1216	CASING	3196	3X4-8G
247-45-1601	CASING	3196	3X4-8G
247-46-1012	CASING	3196	3×4-8G
247-77-1-1102	IMPELLER,7VANE, MAX DIA=20.5″	3450	16″
248-118-1106	IMPELLER	3755	6X8-13
249-54-1012	CASING	3196	1.5X3-10
249-55-1012	CASING, 150#FF FLANGES	3196	2X3-10
249-56-1012	CASING	3196	3X4-10
249-57-1012	CASING	3196	1.5×3-13
249-59-1012	CASING	3196	3X4-13
249-60-1203	CASING	3196	1.5X3-10
249-60-1204	CASING	3196	1.5X3-10
249-60-1216	CASING	3196	1.5X3-10
249-61-1203	CASING, 150#FF FLANGE	3196	2X3-10
249-61-1204	CASING	3196	2X3-10
249-61-1215	CASING, 150#FF FLANGE	3196	2X3-10
249-61-1216	CASING, 150#FF FLANGE	3196	2X3-10
249-62-1203	CASING	3196	3X4-10
249-62-1216	CASING	3196	3X4-10
249-63-1203	CASING	3196	1.5X3-13
249-63-1204	CASING	3196	1.5X3-13
249-63-1216	CASING	3196	1.5X3-13
249-64-1203	CASING, DO NOT USE, USE D02450A….	3196	2X3-13
249-64-1204	CASING	3196	2X3-13
249-64-1216	CASING	3196	2X3-13
249-65-1203	CASING, 150#FF FLANGES	3196	3X4-13
249-65-1203 (A)	CASING, 150#FF FLANGES	3196	3X4-13
249-65-1203DTC	CASING / TUNGSTON CARBIDE, HARD COATED	3196	3X4-13
249-65-1204	CASING	3196	3X4-13
249-65-1216	CASING	3196	3X4-13
249-65-1601	CASING, 150#FF FLANGES	3196	3X4-13
249-66-1203	CASING, 300# FF FLANGE	3196	1.5X3-10
249-95-1-2238	SHAFT ASSEMBLY	3735
251-105-1003	BEARING (BALL), HOUSING	3415	COMMON
251-124-1220	CASING	3196	4X6-13
251-47-1-1000	IMPELLER	3405	5X8-14DV
251-49-1012	CASING	3196	4X6-13
251-56-1203	CASING	3196	4X6-13
251-56-1204	CASING	3196	4X6-13
251-56-1215	CASING, (PEER PN: 96M1131)	3196	4X6-13
251-56-1216	CASING	3196	4X6-13
251-89-1203	CASING	3196	4X6-10
251-89-1204	CASING	3195	4X6-10
251-89-1215	CASING	3195	4 X 6 – 10
251-89-1216	CASING	3196	4X6-10
251-91-1003	CASING, (CARCAZA)	3196	4X6-10
251-91-1012	CASING	3196	4X6-10
251-99-1-1101	IMP LESS RINGS	3415	16X18-18
252-107-1-2229	SHAFT, (RH ROTATION)	3415
252-107-1-2249	SHAFT, (RH ROTATION)	3415
252-107-2-2249	SHAFT, (LH ROTATION)	3415
252-119-1203	IMP.6V-STAGGERED, L/RINGS (MD: 26.0″) (PAT:55146)	3420	24X24-26
252-1-2-1102	IMP,SUCT. 1ST, STAGE, W/RINGS	3316	6X8-17
252-19-1203	IMPELLER, 2/4 VANES	3135	4X12-18
252-21-1203	IMPELLER	3135	6X14-20
252-2-1-1203	IMP,SUCT. 1ST, STAGE, L/RINGS	3316	6X8-17
252-2-2-1203	IMP,SUCT. 1ST, STAGE, W/RINGS	3316	6X8-17
252-3-2-1101	IMP,DISCH. 2ND, STAGE, W/RINGS	3316	6X8-17
252-40-1-1101	IMPELLER LESS RING	3415	8X10-22
252-4-1-1203	IMP,DISCH. 2ND, STAGE, L/RINGS	3316	6X8-17
252-4-2-1203	IMP,DISCH. 2ND, STAGE, W/RINGS	3316	6X8-17
252-5-1-1000	IMP,DISCH. 1ST, STAGE, L/RINGS	3316	8×10-17
252-5-1-1101	IMP,DISCH. 1ST, STAGE, L/RINGS	3316	8×10-17
252-5-2-1000	IMP,DISCH. 1ST, STAGE, W/RINGS	3316	8×10-17
252-5-2-1101	IMP,DISCH. 1ST, STAGE, W/RINGS	3316	8×10-17
252-57-1-1101	IMPELLER, (LESS RINGS)	3415	14X16-18
252-57-2-1101	IMPELLER,, (W/ RINGS)	3415	14X16-18
252-58-1-1203	IMPELLER, 7VANE, MAX DIA=20.5″	3450	16″
252-7-1-1000	IMP,DISCH. 2ND, STAGE, L/RINGS	3316	8×10-17
252-7-1-1101	IMP,DISCH. 2ND, STAGE, L/RINGS	3316	8×10-17
252-7-2-1101	IMP,DISCH. 2ND, STAGE, W/RINGS	3316	8×10-17
252-82-1-1000	IMPELLER L/, RINGS	3405	6X8-22
252-82-1-1101	IMPELLER, (LESS RINGS)	3405	6X8-22DV
253-114-1-1203	IMPELLER, STND.	3405	5X8-12DV
253-114-2-1203	IMPELLER, W/RINGS	3405	5X8-12DV
253-115-1-1203	IMPELLER	3405	5X8-14DV
253-115-2-1203	IMPELLER W/RINGS, (MD: 14.50″)	3405	5X8-14DV
253-12-2-1203	IMPELLER- WITH, IMP RINGS	3420	20X24-24
253-6-2-1000	IMPELLER- WITH, IMP RINGS	3420	20X24-24
254-111-1012	CASING	3196	8X10-13
254-11-1203	CASING	3405	12×14-14
254-112-1203	CASING	3196	8X10-13
254-112-1204	CASING	3196	8X10-13
254-49-1012	CASING	3196	6X8-13
254-50(W.P.)-1203	CASING (WEAR-, PLATE)	3196	6X8-13
254-50(W.P.)-1216	CASING (WEAR-, PLATE)	3196	6X8-13
254-50-1203	CASING	3196	6X8-13
254-50-1216	CASING	3196	6X8-13
254-57	BEARING FRAME	3196	COMMON
254-5X(W.P.)-1203	WEARPLATE	3196	6X8-13
254-5X(W.P.)-1216	WEARPLATE	3196	6X8-13
254-61-1-1203	IMPELLER 18″, NO IMP. RINGS	3415	12X14-18DV
254-61-2-1203	IMPELLER, W/ RINGS	3415	12X14-18
254-66-1216	STUFFING BOX, COVER	3175-	4X6-18S
254-66-A890-5A	STUFFING BOX, COVER	3175	4X6-18S
254-6XWP-1203	WEARPLATE	3196	6X8-15
254-6XWP-1216	WEARPLATE, SHIP W/ -486 O’RNG	3196	6X8-15
254-80-1000	FRAME ADAPTER	3175	14″
254-81-1000	FRAME ADAPTER	3175
254-82-1000	FRAME ADAPTER	3175	22″
254-9-1-1203	IMPELLER LESS, RINGS	3405	12X14-12DV
254-93-1012	CASING	3196	6X8-15
254-94-1203	CASING	3196	6X8-15
254-94-1216	CASING	3196	6X8-15
254-94WP-1203	CASING (WEAR-, PLATE)	3196	6X8-15
254-94WP-1216	CASING (WEAR-, PLATE)	3196	6X8-15
255-117-1-1203	IMPELLER, (LESS RINGS)	3415	14X16-18
255-117-2-1216	IMPELLER W/ RINGS	3415	14X16-18
255-118-1-1203	IMP LESS RINGS	3415	16X18-18
255-120-1-1203	IMPELLER-22.5″, (LESS RINGS)	3415	10X12-22
255-120-2-1203	IMPELLER, WITH IMP. RINGS, MD: 22.50″	3415	10X12-22
255-23-1003	CASING	3175	4X6-14
255-27-1003	CASING	3175	6X8-14
255-29-1003	CASING	3175	6X8-18
255-33-1003	CASING	3175	8×10-14
255-35-1003	CASING	3175	8X10-18
255-35-1003	CASING	3175	8X10-18
255-39-1003	CASING, WITH TAPS	3175	8×10-18H
255-5-1203	CASING	3196	8X10-15
255-5-1215	CASING	3196	8X10-15
255-5-1216	CASING	3196	8X10-15
255-64-1003	IMPELLER, 4 VANES	3175	12X14-22
255-64-1203	IMPELLER, 4 VANES (MD: 22.50″)	3175	12X14-22
256026G590-1000	BEARING FRAME	HS	3X3-10
256047G460-1102	LANTERN RING	MFD	30X30-27125
256-28-2-1203	IMPELLER-MD: 22.5″, (WITH RINGS)	3415	16X18-22G
256-3-1102	IMPELLER, 2 VANE	3175	3X6-14
256-49-1220	CASING	3196	3X4-10
256-5-1102	IMPELLER, 2 VANE	3175	4X6-18
256-64-1012	CASING	3196	8X10-15G
256-65-1203	CASING	3196	8X10-15G
256-65-1204	CASING	3196	8X10-15G
256-65-1209	CASING	3196	8X10-15G
256-65-1216	CASING	3196	8X10-15G
256-9-1102	IMPELLER, 2 VANE	3175	8X10/14-14
257-101-1203	IMPELLER 2 VANE, (MD: 14.00″)	3175	4X6-14
257-10-1-1203	IMPELLER, (LESS RINGS)	3405	6X8-22DV
257-101-1216	IMPELLER 2 VANE, (MD: 14.00″)	3175	4X6-14
257-101-A890-5A	IMPELLER, 2 VANES	3175	4X6-14
257-102-1102	IMPELLER, 2 VANES	3175	4X6/10-18
257-102-1203	IMPELLER 2 VANE, (MD: 17.50″)	3175	4X6/10-18
257-102-1216	IMPELLER, 2 VANES	3175	4X6/10-18
257-103-1203	IMPELLER 2 VANE (MD: 14.00″)	3175	6X8-14
257-103-1216	IMPELLER, 2 VANES	3175	6X8-14
257-95-1203	IMPELLER 2/4 VANE, (MD: 14.00″)	3175	3X6-14
257-95-1216	IMPELLER, 2/4 VANE	3175	3X6-14
257-96-1203	IMPELLER 2/4 VANE, (MD: 14.00″)	3175	4X6-14
257-96-1216	IMP. 2/4 VANES	3175	4X6/10-14
257-97-1203	IMPELLER 2/4 VANES, (MD: 17.50″)	3175	4X6/10-18
257-97-1216	IMPELLER, 2/4 VANES	3175	4X6-18
257-97-A890-5A	IMP 2/4 VANES	3175	4X6-18
257-98-1203	IMPELLER 2/4 VANE, (MD: 14.00″)	3175	6X8/12-14
257-98-1216	IMPELLER, 2/4 VANES	3175	6X8/12-14
257-99-1203	IMPELLER (2/V), (MD: 14.00″)	3175	3X6-14
257-99-1216	IMPELLER, 2 VANES	3175	3X6/8-14
258-063-1203	CASING	3171	2X3-11
258-100-1203	IMPELLER, 4 VANES	3175	12X14-18
258-21-1203	CASING	3175	3X6-14
258-21-1204	CASING	3175	3X6/8-14
258-21-1216	CASING	3175	3X6/8-14
258-23-1203	CASING, NO TAPS	3175	4X6-14
258-23-1204	CASING	3175	4X6/10-14
258-23-1216	CASING	3175	4X6-14
258-25-1203	CASING	3175	4X6-18
258-25-1204	CASING	3175	4X6/10-18
258-25-1216	CASING	3175	4X6/10-18
258-25-A890-5A	CASING	3175	4X6-18
258-2702-1203	CASING WITH, TAPS	3175	6X8-14
258-2702-1216	CASING WITH, TAPS	3175	6X8-14
258-27-1203	CASING	3175	6X8-14
258-27-1204	CASING	3175	6X8/12-14
258-27-1216	CASING	3175	6X8-14
258-28-2-1203	IMPELLER, (WITH RINGS)	3415	16X18-22G
258-55-1203	CASING, (WET PIT)	OR3171	1.5X3-6
258-61-1203	CASING	3171	1.5X2-11
258-69-1203	CASING	3171	1.5X3-13
258-71-1203	CASING	3171	2/2.5X3-13
258-77-1203	CASING	3171	6X8-13
258-7-9698	CASING	3198	1.5X3-10
258-99-1203	IMPELLER, 5 VANES	3175	12X14/18-22
258-99-1215	IMPELLER, 5 VANES	3175	12X14/18-22
258-99-1216	IMPELLER, 5 VANES	3175	12X14/18-22
259-107-1203	CASING	3175	10X12-22
259-107-1204	CASING	3175	10X12/16-22
259-107-1216	CASING	3175	10X12/16-22
259-110-1203	IMPELLER (4V), (MD: 22.50″)	3175	10X12-22
259-110-1216	IMPELLER, 4 VANE	3175	10X12-22
25922-2201	SHAFT COLLAR	3450
259-23-1203	CASING	3175	6X8/12-22
259-23-1204	CASING	3175	6X8/12-22
259-23-1216	CASING	3175	6X8/12-22
259-24-1203	CASING	3175	8X10-14
259-24-1204	CASING	3175	8X10-14
259-24-1216	CASING	3175	8X10-14
259-25-02-1209	CASING, WITH TAPS & DRAIN	3175	8X10-18
259-25-1203	CASING	3175	8X10-18
259-25-1204	CASING	3175	8X10/14-18
259-25-1209	CASING	3175	8X10-18
259-25-1216	CASING	3175	8X10-18
259-3-1203	CASING	3175	12X14-18
259-3-1216	CASING	3175	12X14-18
259-4-1203	CASING	3175	12X14-22
259-4-1216	CASING	3175	12X14/18-22
259-49-1012	CASING	3196	4X6-13
259-5-01-1203	CASING NO TAPS	3175	14X14-22H
259-5-1203	CASING	3175	14X14-22
259-5-1209	CASING	3175	14X14/20-22
259-57-1000	BEARING FRAME, (OIL)	3196	COMMON
259-57-1203	BEARING FRAME	3196	COMMON
259-6-1203	IMPELLER, 6 VANES (MD: 22.5″)	3175	14X14-22
259-6-1216	IMPELLER, 6 VANES	3175	14X14-22
259-62-1203	CASING, (NO TAPS)	3175	8X10-22
259-62-1216	CASING	3175	8X10/14-22
259-63-1203	CASING	3175	10X12/16-18
259-63-1216	CASING	3175	10X12/16-18
259-64-1203	IMPELLER (M.D. 22.50″), 2/4 VANES	3175	6X8/12-22
259-64-1216	IMPELLER 2/4VANE, (MD: 22.50″)	3175	6X8-22
259-66-1203	IMPELLER, 2 VANES	3175	6X8/12-22
259-67-1203	IMPELLER 2 VANE, (MD: 14.00″)	3175	8X10-14
259-67-1216	IMPELLER, 2 VANES	3175	8X10-14
259-68-1203	IMPELLER 2 VANE, (MD: 17.50″)	3175	8X10-18
259-68-1204	IMPELLER, 2 VANES	3175	8X10-18
259-68-1216	IMPELLER (M.D. 17.5″), 2 VANE	3175	8X10-18
259-69-1203	IMPELLER, 2 VANES	3175	8X10-18H
259-69-1216	IMPELLER 2 VANE, (MD: 17.50″)	3175	8X10-18H
259-70-1203	IMPELLER, 2 VANES (MAX DIA: 22.50″)	3175	8X10-22
259-70-1216	IMPELLER, 2 VANES	3175	8X10-22
259-71-1203	CASING	3175	8X10-18H
259-71-1216	CASING	3175	8X10-18H
259-7-1203	IMPELLER (6V), (MD: 17.5″)	3175	12X14-18
259-7-1216	IMPELLER (6V)	3175	12X14-18
259-72-1203	IMPELLER 4 VANE, (MD: 22.50″)	3175	8X10-22
259-72-1209	IMPELLER, 4 VANES – 22″	3175	8X10/14-22
259-72-1216	IMPELLER, 4 VANES	3175	8X10-22
259-73-1203	IMPELLER, 4 VANES	3175	14X14-22
259-73-1216	IMPELLER, 4 VANES	3175	14X14-22
259-75-1203	IMPELLER (MD: 17.5″), 2 VANE	3175	6X8-18
259-75-1216	IMPELLER (MD: 17.5″), 2 VANES	3175	6X8-18
259-84-1203	IMPELLER, 4 VANES	3175	10X12-18
259-84-1204	IMPELLER, (M.D: 17.50″), 4 VANES	3175	10X12-18
259-84-1216	IMPELLER, 4 VANES	3175	10X12/16-18
259-89-1203	IMPELLER 4 VANE, (MD: 17.50″)	3175	8X10-18H
259-89-1216	IMPELLER, 4 VANE	3175	8X10-18H
259-92A-1203	STUFFING BOX, COVER	3736	1.5X4-13
25SH1S5A0	3/60, 3500RPM, MTR: 50HP	SSH-M	2X2.5-10
260-52-1203	CASING, 125 LB. FLANGE	3405	10X12-17
260-64-1203	IMPELLER 2/4 VANES, (MD: 17.50″)	3175	6X8-18
260-64-1216	IMPELLER, 2/4 VANES	3175	6X8-18
260-65-1203	CASING	3175	6X8-18
260-65-1204	CASING	3175	6X8/12-18
260-65-1216	CASING	3175	6X8/12-18
260-85-1203	IMPELLER 4 VANE, (MD: 17.50″)	3175	14X14-18
261-26-1203	IMPELLER, 6 VANES	3175	18X18-22
261-95-1203	CASING	3175	14X14-18H
262-12-1203	CASING	3175	18X18-22
262-74-1003	CASING	3175	20X24-28H
262-8-1003	CASING, 125 LB. FLANGE	3405	10X12-17
262-91-1013	FRAME ADAPTER	3196	2X3-6
262-92-1013	FRAME ADAPTER	3196	8 “
262-93-1000	FRAME ADAPTER	3196	10″
262-93-1013	FRAME ADAPTER	3196	10″
262-94-1000	FRAME ADAPTER	3196	13″
262-94-1013	FRAME ADAPTER	3196	13″
262-96-1203	FRAME ADAPTER	3196	3X4-8G
262-97-1203	FRAME ADAPTER	3196 T	10″
26684-1203-44749	WEAR RING,, IMPELLER	3450	14″
267-29-1203	CASING	3796	4X4-13
267-74-1000	FRAME, GRS LUBE	3755
270-28-1-1012	CASING W/PLUGS, 150# FF	3996	1.5X3-8
270-28-2-1203	CASING W/PLUGS, 150# FF	3996	1.5X3-8
270-58-1011	CASING	3796	1.5X1.5-8
27177-372-2239	STUD-CASE TO COVER	3700	COMMON
27177-536-2229	GLAND STUD	STX
27177-564-2228	STUD STUF, BOX COVER	XLT
27177-567-2229	STUD-GLAND (J.CRN 1 MECH., SEAL SNGL INSIDE	3199
27177-588-2228	STUD – GLAND, PACKED BOX	3196	COMMON
27177-607-2229	STUD, GLAND	3196	COMMON
27177-610-2226	STUD-SUCT SDPLT TO CASE	3175	8X8-12
27177-620-2228	STUD – S.B. CVR TO FRAME, ADAPTER	3196	2X3-8
27177-621-2229	STUD GLAND	XLT
27177-626-2228	STUD, COVER TO, ADAPTER	3196
27177-715-2228	STUD, SB COVER	3196	COMMON
272-70-1220	CASING	3196	3X4-8
27521-13-5110	GALDET END CVR	3450
27882-1102	LANTERN RING	3450
29744-1104	SHAFT SLEEVE	3135	4X12-14
2K241	IMPELLER	3886
2K568	IMPELLER	3656LH	3X3-5
3-46-155-2226	STUD-GLAND, PACKED BOX (4 REQ)	3405
3-46-281-2226	STUD,SUC SDPLT, TO CASE(4 REQ)	3175	COMMON
3-46-281-2226ETC	STUD, SUC SDPT, HEX NUT-SD PLT	COMMON	M
3469-2226	GLAND-DIAPHRAGM SEAL	3175
3-46-9-2226	STUD-GLAND (PKD BOX)	3175
40210BB11	VAPOR SEAL	3171NM	1X1.5-6
40434BB-6470	SLEEVE	3196NM	3X4-10 H
40513BB02-6241	SHAFT SLEEVE	3196NM
40513BB02-6470	SLEEVE	3196NM	COMMON
43153100	IMPELLER (ITT TRASH HOG), S.A. MARLOW	GOU	8GTH14EL
452300304	IMPELLER	TS	50-125/55
47174-5-D	OUTER SNAP RNG, MOTOR R. ELECT	JCU	3X4-11
4883300002	RADIAL BEARING SLINGER	JC	3X4-11
4883400137	SHAFT	JC	1.5X2X14
49507-10-2226	HEX NUT-SUCT PIECE, PIECE	3175	8X8-12
49507-57-2210	HEX NUT	3196
49507-59-2210	BRG. HSG. HEX, JAM NUT	3196	8X10-13
49507-7-2228	HEX NUT- SDPLT, STUD	3175	COMMON
49507-9-2228	HEX NUT-GLAND STUD	3175
49509116-2229	IMPELLER KEY	3171	2.5X3-11
49511-102-2210	HEX CAP SCREW, END COVER TO FRAME	3175	COMMON
49511-203-2210	CAPSCREW, FRAME FOOT	3196
49511-205-2210	H CAP SCREW, ADAPTER TO SB COVER	3175	8X8-12
49511-252-2228	CAPSCREW-ADAPTER TO CASE, 150#	3196	10″
49511-253-2210	CAPSCREW, ADAPTER, TO CASE	3196
49511-253-2228	CAPSCREW, ADAPTER, TO CASE	3175
49511-255-2210	HEX CAP SCREW, BRG HOUSING TO FRAME	3175	4X6-14
49511-302-2210	HEX CAP SCREW-PAD	3175
49511-351-2210	HEX CAP SCREW, ADAPTER TO FRAME	3175	4X6-14
49511-4022210	H CAP SCREW-HH, COVER	3175	4X6-14
49514-201-2229	SET SCREW-, SLEEVE NUT	3410	COMMON
49514-202-2229	SET SCREW, SLEEVE NUT	3410	10X12-12H
49514-227-2226	SET SCREW,, IMPELLER	3316	COMMON
49514-227-2229	SET SCREW, IMP RING	3316
49521-104-2228	HEX TAP BOLTS, JACKING	3196	1X1.5-8
49521-204-2210	HEX TAP BOLT	3196
49521-204-2210.	HEX TAP BOLT, BEARING HOUSING	3196
49521-204-2228	HEX TAP BOLT	3196
49521-206-2228	TAP BOLT-SDPLT	3175
49521-305-2210	HEX TAP BOLTS, IMP. ADJ.	3196	8X10-13
49521-306-2210	H TAP BOLT – IMPELLER, ADJUSTING SCREW	3175	4X6-14
49528-007-4-6501	PIPE NIPPLE-OILER	3316	1.5X2-9
49568-102-2226	KEY-IMPELLER	3755	COMMON
49568-208-2226	IMPELLER KEY	3410	COMMON
49568-306-2226	KEY-IMPELLER	3410	COMMON
49568-307-2226	KEY – IMPELLER	3175	COMMON
49568-329-2213	IMPELLER KEY	3410	COMMON
49568-403-2213	KEY, COUPLING	3180
49568-415-2226	KEY-IMPELLER	3175	COMMON
49568-506-2226	KEY – IMPELLER	3175
49589-116-2229	IMPELLER KEY	3171	2.5X3-8
49589-211-2229	IMPELLER KEY	3171	COMMON
49589-211-2230	IMPELLER KEY	3171	COMMON
49589-322-2210	IMPELLER KEY	3171	COMMON
4975102305	GASKET	JC	3X4-11
520103	PART KIT	JC	1.5X2X14
57042-103	OIL MIST CONN., PLUGS-OIL LUBE	3196	8X10-13
58101-244-2210	RET’G RING, BALL BEARING	3171
58101-281	RETAINING RING, BEARING HOUSING	3196	COMMON
58101-393	RETAINING RING, BEARING HOUSING	3196	COMMON
58101-433-2210	RETAINING RING	JC	3X4-11
58101-475	RTNG RING, BEARING HSING	3196	3X4-13
58101-939	SNAP RING, INT	3196
58102-100	RETAINING RING, (GREASE LUBE)	3405	3X4-14
58102-118	RET. RING, THRST BRG	3410	4X6-13H
58102177	RETAINING RING, THRUST	3410
58102-196	RETAINING RING	3405/3404
58555-100	STEEL RTNG RING-SHAFT	3199
623L4LNSX103	LIQUID END KIT, STD BORE, PACKED BOX	3196 CV	2X3-13
62963-1101	WEAR RING CASE	3460	8X10
63122-4-2210	PLUG OIL FILL	3196
63621-11-2226	IMPELLER KEY	3450
64262-12-E	INNER SEAL, MOTOR R. ELECT	JCU	3X4-11
64876-1001	DUST COVER	3450
64881-1001	OIL THROWER	3450	16
64885-1000	BEARING, HOUSING	3450	16
65029-1102	IMP WEAR RING	3450
65464-1101	WEAR RING, IMPELLER	3460	14L
65745-1203-49340	WEAR RING,CASE, (IMP W/RINGS)	3450	14″
66135-53	DEFLECTOR	3410	COMMON
66135-57-6301	DEFLECTOR	3410	10X12-17
66181-2-1102	SHAFT SLEEVE	3450
66652-1102	CASE RINGS	3450
67868-107-5108	GASKET, CASE	3420
67868-108-5108	GASKET, CASE, SUCTION	3420	20X24-28
67868-203-5108	GASKET, CASING	3415	16X18-18
67868-204-5108	GASKET CASING, NON-ASB	3415	16X18-18
67868-20-5108	GASKET, CASING, ALSO REQ. 67868-21-5108	3405	3X4-14
67868-205-5108	GASKET CASING	3415	COMMON
67868-21-5108	GASKET, CASING, ALSO REQ. 67868-20-5108	3405	3X4-14
67868-220-5108	GASKET,, CASING	3415	14X16-22H
67868-221-5108	GASKET-, CASING	3415	18X20-22H
67868-222-5108	GASKET-, CASING	3415	18X20-22H
67868-38	GASKET, CASE	3405	6X8-17 DV
67868-39	GASKET, CASE	3405	6X8-17 DV
67868-43/42-5108	GASKET CASING, PARTING 1/64″	3404	8X10-17G
67868-44-5108	GASKET CASING	3405	8X10-17
67868-45-5108	GASKET CASING	3405	8X10-17
67868-50-5108	GASKET,, CASING	3405	10X12-17L
67868-51-5108	GASKET,, CASING	3405	10X12-17L
67868-52-5108	GASKET,, CASING	3405	12X14-12DV
67868-52-5132	GASKET,CASING	3405
67868-53-5108	GASKET,, CASING	3405	12X14-12DV
67868-53-5132	GASKET,CASING	3405
67868-54-5108	GASKET, CASING	3316	1.5X2-9
67868-55-5108	GASKET, CASING	3316	1.5X2-9
67868-58-5108	GASKET, CASING, SUCT.	3316	2X3-11
67868-59-5108	GASKET, CASING, DISCH.	3316	COMMON
67868-60-5108	CASING GASKET HALF	3316	3X4-11H
67868-61-5108	CASING GASKET HALF	3316	3X4-11H
67868-62-5108	GASKET-, CASING	3316	4X6-11
67868-63-5108	GASKET-, CASING	3316	4X6-11
68270-1001	DEFLECTOR	3655/3755	1.5X2-9
68271	GLAND WASHER,, QUENCH GLAND	3655	2.5X3-13
68273-1001	WEAR RING,, CASE	3655	4X6-11H
68274-1106	GLAND,STUFFING, BOX	3755	3189 M
68290-1104	RING, CASE	3755	2.5X3-9
68290-1618	WEAR RING, CASE	3655	2.5X3-13
68293-1104	WEAR RING, CASE	3655	4X6-11
68314-2-1618	SUCTION COVER, WEAR RING	3655	2.5X3-13
68318-1-1104	WEAR RING CASE	3655/75	1.5X2-9
68318-2-1104	WEAR RING CASE	3655/75	1.5X2-9
68320-5108	GASKET,SUCTION, COVER	3755	1.5X2-9
68326-1203	WEAR RING	3655	2X2.5-9
68335-55-5108	GASKET, SUCTION COVER	3199
68338-2-1104	RING, CASE	3755	3X4-7
68365-2229	SLEEVE-J.CRANE, T 1-W/O-RING	3655	2 1/2X3-9
68381-5108	GASKET, SUC. CVR	3755	1.25X1.5-7/6.75
68-39-1101	SIDEPLATE, DISCHARGE	3135	4X12-14
68454-01-1001	WEAR RING,, SUCTION COVER	3655	1.25X1.5-5
68454-02-1101	WEAR RING,, SUCTION COVER	3655	1.25X1.5-7
68492-1001	WEAR RING-, SUCTION COVER	3655	4X6-11H
68492-1104	WEAR RING-, SUCTION COVER	3655	4X6-11H
68679 8-2229	WASHER IMPELLER	3735
68679-1-2226	WASHER, IMPELLER	3655	1.25X1.5-8
68679-2-2226	WASHER, IMPELLER	3655	COMMON
68679-9-2229	IMPELLER WASHER	3199
68686-1104	SHAFT SLEEVE	3755	1.5X2-9
68686-1203	SHAFT SLEEVE	3755/3655	1.5X2-9
68686-2226	SHAFT SLEEVE	3655
68887-2-5108	GASKET, SHAFT SLEEVE	3450
68946-5136	GASKET, SUCTION COVER	3171	4X6-11H
69515-5108	GASKET, SUCTION CVR	3655	2.5X3-13
69565-35120	GASKET-HH COV	3175	4X6-14
69995-1102	CASE RING, (IMP W/RINGS)	3405	4X6-12
70000L0O10-0000	FRAME ASSY. W/STANDARD, SHAFT L/COOLING	3700	6TH EDITION
70006-2229	KEY, IMPELLER	3316	1.5X2-9
70008-5130	GASKET, END COVER, (GREASE LUBE)	3405	3X4-14
70013-1001	BRG END CVR -, (GREASE LUBE)	3405	4X6-11M
70014-1001	BRG END CVR -, COUPLING	3405	4X6-11
70015-1101	WEAR RING,CASE, (IMP W/RINGS)	3316	6X8-17
70019-1001	S.B. BUSHING	3405/3316	COMMON
70019-1104	S.B. BUSHING	3405/3316
70019-1618	STUFFING BOX BUSHING	3316	4X6-11HG
70020	SLEEVE, NON-LOCK.	3316	COMMON
70020-1203	SLEEVE,, W/”O”-RING	3316
70020-6956	SLEEVE,, W/”O”-RING	3316
70021	SLEEVE, LOCKING	3316	COMMON
70021-1203	SLEEVE,, LOCKING	3316
70021-6956	SLEEVE,, LOCKING	3316
70022-5130	GASKET COVER	3405	4X6-11
70023-2226	IMPELLER KEY	3405	COMMON
70030-1104	WEAR RING-, IMPELLER	3405	12X14-12DV
70038-12-5108	GASKET	3175
70038-8-5136	GASKET,, DISCRG FLNG TO DISCRG ELBOW	3171	4X6-11H
70077-1618	WEAR RING – IMPELLER	3405	6X8-14GSV
70079-1001	BRG END COVER, SGL EXT-GREASE	3405/3404	COMMON
70080-1001	BRG END COVER, (CPLG)-GREASE	3405
70083-1001	BUSHING,, STUFFING BOX	3316	COMMON
70083-1104	BUSHING,, STUFFING BOX	3405/3404
70089-2226	KEY – IMPELLER	3404/3316
70089-2229	KEY,, IMPELLER	3405
70102-1102	WEAR RING,, CASE	3316	2×3-9
70102-1203	WEAR RING, CASE	3405	3X4-14
70103-1102	WEAR RING,CASE	3316	2X3-11
70113-1101	DIAPHRAGM	3305	1.5X2-9
70114-1101	WEAR RING CASE, FOR IMPELLER	3316	1.5X2-9
70115-1001	WEAR RING,, CASE	3316	1.5X2-9S
70115-1101	WEAR RING-CASE, GOU 13350	3305	1.5X2-9
70115-1102	WEAR RING,, CASE	3316	1.5X2-9S
70134-1001	WEAR RING,CASE, (IMP W/RING)	3316
70134-1618	WEAR RING,, IMPELLER	3316	4X6-11
70197-1001	WEAR RING, IMPELLER	3405	6X8-12
70197-1104	WEAR RING,, IMPELLER	3405	6X8-12
70197-1104	WEAR RING,, IMPELLER	3405	6X8-12
70197-1104-	WEAR RING,, IMPELLER	3405	8X10-12G
70197-1104-	WEAR RING,, IMPELLER	3405	8X10-12G
70198-1101	WEAR RING CASE, FOR IMPLR	3316	4X6-11HG
70198-1618	WEAR RING-CASE, FOR IMPLR, W/RGS	3316	4X6-11HG
70261-1104	WEAR RING, FOR, IMPELLER	3405	8X10-17G
70262-1001	WEAR RING CASE	3405
70262-1102	RING, CASE	3405	10X12-12
70263-1101	WEAR RING, CASE	3405	8X10-14
70263-1127	WEARING RING,, CASING	3404	8X10-17G
70301-1102	CASE RING	3405
70322-1001	DEFLECTOR, (2 REQUIRED)	3135	4X12-14
70424-1101	WEAR RINGS,, CASE	3405	5X8-14DV
70478-1001	WEAR RING, CASE	3316
70478-1101	WEAR RING-CASE	3316	3X4-11H
70479-1101	WEAR RING-CASE, FOR IMP W/RING	3316	3X4-11H
70480-1101	WEAR RING-IMPELLER	3316	3X4-11H
70597-11	STAINLESS RTNG RING-SHAFT	3335
70721-11	O-RING,, SHAFT SLEEVE	3405	COMMON
70721-127	O-RING	3175	COMMON
70721-129	O’RING IMPELLR	3196	COMMON
70721-130	O-RING, SUCTION SD/PLT	3175	4X6-14
70721-131	O-RING, SUCTION SD/PLT	3175	18
70721-131	O-RING, SUCTION SD/PLT	3175	18
70721-131	O-RING, SUCTION SD/PLT	3175	18H
70721-131	O-RING, SUCTION SD/PLT	3175	18H
70721-132	O-RING, SUCTION SD/PLT	3175	18/22H
70721-133	O-RING, (SHAFT SLEEVE)	3175
70721-134	O-RING, SLEEVE	3175	COMMON
70721-135	O-RING, SLEEVE	3175	COMMON
70721-136	O-RING	3175	COMMON
70721-137	O-RING,, IMPELLER	3196	COMMON
70721-149	O-RING,, IMPELLER	3198	COMMON
70721-3	O-RING,, BRG HSG	3175S+96	COMMON
70721-33	IMPELLER	3196	COMMON
70721-411	O-RING, SUCTION SD/PLT	3175	12
70721-539	O-RING SHAFT, SLEEVE	3175	COMMON
70721-540	O-RING,, SHAFT SLEEVE	3175	COMMON
70721-541	O-RING, IMPELLER SCREW	3175	COMMON
70721-64	O-RING,, IMPELLER	3196	COMMON
70721-66	O-RING, BRG. HOUSING	3196	COMMON
70721-80	O’RING	3405
70781-2229	SLEEVE-NON, LOCKING	3406
70782-124-5127	GASKET, S.PLATE TO CASE	3175	16X18-22
70782-133-5108	GASKET,, SHAFT SLEEVE	3700	3X4-16L
70782-14-5108	GASKET,, SHAFT SLEEVE	3735	COMMON
70782-1-5108	GASKET-GLAND & LINER	3316	1.5X2-9
70782-151-5127	GASKET, S.PLATE TO CASE	3175	3X6-12
70782-154-5127	GASKET,, SDPLT	3175	8X8-12
70782-162-5108	GASKET, SLEEVE-SFT	3700
70782-16-5108	GASKET, SHAFT SLEEVE	3655	2.5X3.13
70782-173-5127	GASKET CASING	3180	12″
70782-174-5127	GASKET, CASING	3180	14″
70782-175-5127	GASKET CASING	3180
70782-176-5127	GASKET CASING	3180	19″
70782-177-5127	GASKET CASING	3180	22″
70782-178-5127	GASKET CASING	3180
70782-182-5127	CASING GASKET	3196
70782-184-5127	GASKET, ADPTR TO FRAME	3296
70782-193-5127	GASKET – FRAME MOUNTED, POWER	3298
70782-19-5127	GASKET- CASE, 6″	3196	COMMON
70782-19-5127	GASKET- CASE, 6″	3196	COMMON
70782-19-5127	GASKET	3197	1X1.5-6
70782-19-5127	GASKET	3197	1X1.5-6
70782-2	GASKET	3405	6X8-17DV
70782-20-5127	GASKET-CASE	3196	8″
70782-25-5127	GASKET GLAND	3196
70782-28-5127	GASKET- CASE	3196	13″
70782-28-5175	GASKET, CASING	3196
70782-29-5127	CASING GASKET	3196	10″
70782-30-5127	GLAND GASKET	3196
70782-49-5127	CASING GASKET	3196	15″
70782-50-5127	GASKET-SB CASE, COVER	3175	8X8-12
70782-52-5108	GASKET-, SB CASE CVR	3175	14″
70782-52-5127	GASKET, SB CASE CVR	3175	14″
70782-53-5106	GASKET-, SB CASE CVR	3175	18″
70782-53-5127	GASKET-, SB CASE CVR	3175	18″
70782-54-5108	GASKET, CASE, COVER	3175	22 “
70782-54-5127	GASKET, SB CASE CVR	3175	22″
70782-55-5127	GASKET, S.PLATE TO CASE	3175	22″
70782-56-5127	GASKET, S.PLATE TO CASE	3175	12X14-18/18H
70782-57-5127	GASKET SIDE, PLATE TO CASE	3175	COMMON
70782-59-5127	GASKET SDPLT, TO CASE	3175	COMMON
70782-61-5127	GASKET SDPLT, TO CASE	3175	18″
70782-62-5127	GASKET, S.PLATE TO CASE	3175	6X8-22
70782-63-5106	GASKET-S, PLATE TO CASE	3175	VARIOUS
70782-63-5127	GASKET, SIDEPLATE TO CASE	3175	6X8-14
70782-64-5106	GASKET SDPLT, TO CASING	3175	4X6-14
70782-64-5127	GASKET SDPLT, TO CASE	3175	COMMON
70782-65-5108	GASKET- SIDE, PLATE TO CASE	3175
70782-65-5127	GASKET, SIDEPLATE TO CASE	3175	3X6-14
70782-66-5108	GLAND GASKET, FOR CHEKSEAL, DYN. SEAL	3196
70782-81-5127	GASKET- CASE, 6 “	3196	COMMON
70782-82-5127	GASKET- CASE, 8 “	3196	COMMON
70835-1001	BEARING HOUSING	3755	1.25X1.5-7
70839-9-1101	IMPELLER, LESS RINGS, FLASHED FOR WW	3405A	4X6-17
70876-1102	GLAND, FLUSH	3316	2X3-11
70900-1101	BUSHING,, STUFFING BOX	3135	4X12-14
70983-2229	SLEEVE	3135	S
70983-6963	SLEEVE	3135	S
70XXX-1001	COVER,BEARING,, COUPLING END	3404	8X10-17G
71091-3	C.STL DOWEL, PIN	XLT
71131-2229	BUSHING,, STUFFING BOX	3138
71151-2229	BUSHING,, STUFFING BOX	3135	4X12-14
71226-1102	WEAR RING,, CASE	3405	8X10-12G
71239-1104	SHAFT SLEEVE, (PACKED)	3755	COMMON
71239-1106	SHAFT SLEEVE, (PACKED)	3655	3755 M
71239-1618	SHAFT SLEEVE, PACKED BOX	3655/3755	2X2.5-9
71240	SHAFT SLEEVE, (PACKED)	3655	3755 M
71240-2229	SHAFT SLEEVE, (PACKED)	3655	3755 M
71242-2229	SLEEVE	3755/3655	COMMON
713100E000-1228	CASING	5000	4X4-18
71386-1618	WEAR RING – CASE, FOR IMPELLER W/RGS	3405	4X6-17GM
71388-1102	WEAR RING,, CASE(IMP RING)	3405	8X10-12G
71411-1203	S.B. BUSHING	3138	COMMON
71446-1203	WEAR RING,, CASE	3405	8X10-12
71449-1203	RING, CASE	3405	8×10-17
71449-1203	RING, CASE	3405	8×10-17
71449-1203	RING, CASE	3405	10X12-12
71449-1203	RING, CASE	3405	8×10-14G
71449-1203	RING, CASE	3405	10X12-12
71452-1203	RING, CASE	3405
71456-16-1203	IMP L/RINGS, FLASHED FOR WW	3405	8X10-17
71456-9-1203	IMPELLER, LESS RINGS, FLASHED FOR WW	3405A	4X6-17
71693-1203	WEAR RING,CASE, IMP. W/RINGS	3405	8X10-12
71694-1203	WEAR RING,IMPELLER	3316	6X8-17L
71734-1203	IMPELLER-WEAR RING	OR3405	6X8X12G
71745-1203	WEAR RING,CASE, for IMP w/RING	3316	4X6-11HG
71745-1203.	WEAR RING,CASE	3316	4X6-11
71746-1203	WEAR RING,, CASE	3405	8X10-12G
71851-1203	RINGS, IMP	3405	4X6-14/17
71852-1203	IMPELLER WEAR RING	3405	10X12-17
71853-1203	RING , IMPELLER	3405	8X10-17
71854-1203	WEAR RING – IMPELLER	3405	5X8-12/14DV
71854-1204	WEAR RING – IMPELLER	3405	6X8-17DV
71855-1203	WEAR RING CASE, (IMP W/RINGS)	3405	12X14-14DV
71856-1203	CASE RING, (IMP W/RINGS)	3405	4X6-12
71857-1203	WEAR RING,CASE, FOR IMPELLER W/RINGS	3405	8×10-17
71858-1203	WEAR RING,CASE, (IMP W/RING)	3405	5X8-12/14DV
71859-1203	WEAR RING,CASE, (IMP W/RING)	3316	4X6-11
71860-1203	***DO NOT USE***WEAR RING,, CASE	3405	5X8-12/14DV
71860-1226	WEAR RING, CASE	3405	6X9-17
71861-1203	CASE RINGS	3405	4X6-14/17
71866-1203	WEAR RING,, CASE(IMP RING)	3405 M	8X10-12G
71893-1000	HSG, BRG STDY, W/BRG+RET RING	3171	3X4-13
71903-2229	COUPLING, SHAFT	3171	3X4-13
719100E000-1228	IMPELLER	5000	4X4-18
71918-1000	COVER, BEARING END	OR3171
71940-2229	SLEEVE	3138	COMMON
71958-1203	WEAR RING,, IMPELLER	3405	6X8-12
71958-1203.	WEAR RING,, IMPELLER	3405	8X10-12G
71958-1203-4	WEAR RING,, IMPELLER	3405	6X8-12
71958-1203-5	WEAR RING,, IMPELLER	3405	8X10-12G
72072-1102	CASE RING, (W/IMP RING)	3316	3X4-11G
72072-1203	CASE RING	3316	3X4-11H
72073-1203	CASE RING, (W/IMP RING)	3316	3X4-11H
72074-1226	WEAR RING-IMPELLER	3316	3X4-11H
72209-2229	SLEEVE	3138
72416-0300	BREATHER, OIL LUBE	3410
72633-1-2210	SHAFT COLLAR, (GREASE LUBE)	3405	3X4-14
72633-2-2210	SHAFT COLLAR	3405	4X6-11
72633-3-2210	COLLAR, SHAFT	3405
72635-3-2210	COLLAR, FOR, SHAFT	3404	8X10-17G
72679-2-2229	SHAFT SLEEVE	3333
72855-1000	WEAR RING,, CASE	3316	8X10-17
72943-1001	BRG HSG-OUTBOARD	3199	1X1.5-6T
73055-1203	DRIP. BASIN	3196X	3×4-8G
73064-2210	BOLT, FRM FOOT	3196
73078-5130	GASKET FRAME, TO ADAPTER	3196
73092-1226	WEAR RING, CASE	3316	2X3-11
73093-1203	WEAR RING,CASE	3405	3X4-12
73093-1226	WEAR RING-CASE	3405	3X4-12
73095-1226	WEAR RING – IMPELLER	3316	2X3-11
73096-1203	BUSHING,, STUFFING BOX	3316
73296-1203	WEAR-RING IMP.	3316	4X6-11HG
73519-2	DEFLECTOR	3196
73519-3	DEFLECTOR	3196	3X4-13
73519-5	DEFLECTOR	3735	COMMON
73519-7	DEFLECTOR	3736
73519-8	DEFLECTOR	3196	COMMON
73523-3	DOWEL PIN	3196
73705X (304NCB)	SHAFT SLEEVE	3196	COMMON
73705X-1215	SHAFT SLEEVE	3196	COMMON
73705X-1216	SLEEVE	3196	COMMON
73705X-2156	SLEEVE	3196
73705X-2228	SLEEVE	3196	3X4-13
73705X-2229	SLEEVE	3196	COMMON
73705X-2230	SHAFT SLEEVE	3196
73705X-2232	SHAFT SLEEVE	3196	3X4-13
73705X-2247	SHAFT SLEEVE,, PACKED BOX	3196
73705X-2248	SHAFT SLEEVE,, PACKED BOX	3196
73705X-2256	SLEEVE	3196
73705X-6956	SHAFT SLEEVE	3196	COMMON
73706-2247	SLEEVE	3196-3198
73707-6956	SLEEVE, (HARD COATED)	3196
73708-5130	GASKET-FRAME TO ADAPTER	3196	15″
73716-1203	GLAND, (PACKING)	3196	COMMON
73780-1203	WEAR RING, IMP, (CASE SIDE)	3735M	1X2-11A
73801-1106	WEAR RING	3755L	6X8-13
73810-1102	BUSHING, STUFFING BOX	3450	16
73887-1203	WEAR RING, CASE	3316 L	6X8-17
73888-1203	WEAR RING,CASE, (IMP W/RINGS)	3316 L	6X8-17
73906-02-1001	WEAR RING, IMP	3405 S	2X3-11
73907-1001	WEAR RING,CASE	3405 S	2X3-11
73920-1203	RING, CASING	3405 M	4X6-11DV
73921-1203	RING, IMPELLER	3405 M	4X6-11DV
73922-1203	RING, CASING	3405 M	4X6-11DV
74079-1203	WEAR RING-IMPELLER	3405	5X8-12GDVM
74083X-2229	SLEEVE, PACKED BOX	3735	COMMON
74084-1001	BRNG. END CVR. (O.B.)	3735	COMMON
74140-5108	GASKET WATER JACKET	3735	1X2-11B
74142-5108	GASKET, BRNG COVR, TO FRAM	3735	1.5X2-9
74184-1001	DEFLECTOR	3420 S	20X24-28
74185-1001	OIL THROWER	3420	20X24-28
74522-1101	SLEEVE, OIL RING	3420	24X30-32
74563-1000	BRG END COVER, OUTER THRUST	3420 S	20X24-28
74568X-2229	SLEEVE	3736	1.5X4-13
74601-1203	CASE WEAR RING	3736	1.5X4-13
74664-1000	OIL THROWER	3420	24X24-26
74666-1000	BEARING HOUSNG, (COUPLING)	3420 S	24X24-26
74768-2-1001	OIL RING SLEEVE	3415	COMMON
74772-1104	SHAFT SLEEVE	3415	COMMON
74773-2226	IMPELLER KEY	3415 S	COMMON
74773-2229	KEY, IMPELLER	3415	COMMON
747E783	COMPLETE PUMP	3298	1X1.5-6
74800-01	DEFLECTOR	3316	COMMON
74801-5130	GASKET, BRG END COVER	3316	1.5X2-9
74812-01	DEFLECTOR	3316	COMMON
748-1201	DEFLECTOR	3316	2X3-11
74813-5130	GASKET-, BRG END COVER	3316	COMMON
74816-01	DEFLECTOR	3316	COMMON
74818-5130-0007	GASKET,, BRG. END COVER	3316 L	COMMON
74930-1007	BUSHING,, STUFF. BOX	3415	COMMON
74930-1101	BUSHING,, STUFFING BOX	3415 S	COMMON
74931-1102	LANTERN RING	3415 S	16X18-18
74950-5112	GASKET- BRG, HOUSING	3415 S	14X16-18
74951-5112	GASKET, COVER	3415 S	14X16-18
74952-1-2210	PIN-OIL RING, (RING OILED BALL BEARINGS)	3415	14X16-18
75071-1007	WEAR RING-IMPELLER	3415	14X16-18
75104-1203	WEAR RING-CASE	3405 L	12X14-12DV
75106-1203	WEAR RING-CASE, (FOR IMP W/RG)	3405 L	12X14-12DV
75107-1102	WEAR RING-CASE, (FOR IMP W/RG)	3405 L	12X14-12DV
75173-1000	WEAR RING,IMP	3415	10X12-22M
75173-1001	IMP. WEAR RING	3415 M	10X12-22
75199-1101	SLEEVE	3415	14X16-22H
75202-1-1001	SLEEVE – OIL RING THRUST	3415 M	COMMON
75202-2-1001	SLEEVE OIL, RING COUPLING	3415 M	COMMON
75205-5130	GASKET-BEARING, HOUSING	3415 M	COMMON
75206-5130	GASKET-COVER	3415 M	COMMON
75262-2229	SLEEVE F/DURA, PT,PTO,PTO-HT	3196	3X4-8
75347-1203	SLEEVE	3415	COMMON
75348-1203	SLEEVE	3415	COMMON
75-348-6956	SLEEVE	3415
754013MOLBB100	LIQUID END KIT	3655M	4X6-13
75465-1203	STUFF BOX, BUSHING	3420 S	20X24-28
75470-1203	LANTERN RING	3420 S	16X18-30
75599-1203	WEAR RING, ST., BOX COVER	3736	1.5X4-13
75639-1203	BUSHING,, STUFFING BOX	3415	COMMON
75640-1203	BUSHING,, STUFFING BOX	3415 M	COMMON
75643-1203	LANTERN RING	3415 S	COMMON
75644-1203	LANTERN RING	3415 M	COMMON
75656-1203	WEAR RING-IMPELLER	3415	14X16-18
75660-1203	WEAR RING,, IMPELLER	3415 S	16×18-18S
75664-1203	WEAR RING,, IMPELLER	3415 M	10X12-22
75704-5130	GASKET, COUPLING COVER	3196	6X8-13
75737-1203	WEAR RING,IMP	3415 S	12X14-18DV
75739-1203	WEAR RING, IMPELLER	3415	12X14X18
75748X-2229	SLEEVE	3175	COMMON
75750X-1216	SHAFT SLEEVE	3175	COMMON
75750X-2229	SHAFT SLEEVE	3175	COMMON
75752-1203	SHAFT SLEEVE	3175	COMMON
75752X-2379	SHAFT SLEEVE	3175	COMMON
75759-1001	S.B. BUSHING	3175 S	COMMON
75760-1203	S.B. BUSHING	3175	COMMON
75760-1216	S.B. BUSHING	3175	COMMON
75762-1203	STUFFING BOX BUSHING	3175	COMMON
75763-1001	STUFFING BOX, BUSHING	3175
75764-1203	S.B. BUSHING	3175	COMMON
75764-1204	STUFFING BOX, BUSHING	3175 L	COMMON
75764-1216	S.B. BUSHING	3175	COMMON
75765-1001	GLAND,PACK BOX	3175	COMMON
75765-1101	GLAND,PACK BOX	3175	COMMON
75766-1203	GLAND	3175	COMMON
75767-1001	GLAND,, STUFFING BOX	3175	COMMON
75767-1102	GLAND	3175	COMMON
75767-1203	GLAND	3175	COMMON
75768-1203	GLAND	3175	COMMON
75771-5130	GASKET-COUPLNG, COVER	3175	COMMON
75772-5130	GASKET	3175	COMMON
75773-5103	GASKET-INBOARD, COVER	3175	COMMON
75773-5130	GASKET, INBOARD COVER	3175S	4X6-18S
75774-5130	GASKET INBOARD COVER	3175	COMMON
75775-5130	GASKET	3175 L	COMMON
75831-1101	WEAR RING, IMPLR	3415	14X16-22H
75853-1001	HAND HOLE, COVER	3175-S	COMMON
75999-1203	WEAR RING, IMPLR	3415	14X16-22H
75PED0MPG00000	POWER END, GRS LUBE	3655
76028-2229	SLEEVE NON-, LOCK/MECH-SEAL	3405 L	6X8-22
76029-2229	SLEEVE-LOCKING, (MECH. SEAL)	3405 L	6X8-22
76069-1203	STUFFING BOX, BUSHING	3450	16
76230X	SHAFT SLEEVE	3196	COMMON
76230X-2156	SLEEVE	3196
76230X-2229	SLEEVE	3196	COMMON
76230X-2232	SLEEVE	3196	COMMON
76230X-2248	SLEEVE	3196	COMMON
76235-1000	BEARING HOUSNG, (THRUST)	3420 S	24X24-26
76245-1203	WEAR RING,, CASE	3405
76246-1203	WEAR RING-CASE, (IMPL W/RINGS)	3405 L	6X8-22DV
76247-1226	WEAR RING, IMP	3405	6X8-22
76289-0000	LANTERN RING (DRY PIT)	3171	2.5X3-11
76292	LANTERN RING, DRY PIT UPPER S.BOX	3171
76334-1203	WEAR RING CASE	3420	20X24-26
76453-6956	SHAFT SLEEVE	3196	COMMON
76575-1203	WEAR RING,CASE	3405 S	2X3-11
76576-1203	WEAR RING,CASE	3405 S	2X3-11
76577-1203	WEAR RING, IMP	3405 S	2X3-11
76597-3201	BRG. END COVER	3735	1X2-11B
76-65-1203	COVER, CASE	3715	13″
76-66-1203	IMPELLER	3715	1.5X2-13
76-68-1203	IMPELLER	3715	3X4-13
76-76-1203	IMPELLER	3715	2X3-13
76762-1203	LANTERN RING	3196 XLT	8X10-13
76771	BRG END COVER, IB	3196 ST	COMMON
76771	BRG END COVER, IB	3196 ST	COMMON
76772X	SLEEVE	3196	COMMON
76772X-2155	SHAFT SLEEVE	3196	COMMON
76772X-2156	SHAFT SLEEVE	3196	COMMON
76772X-2229	SLEEVE	3196	COMMON
76772X-2230	SLEEVE	3196	COMMON
76772X-2247	SLEEVE	3196	COMMON
76772X-2248	SLEEVE	3196
76772X-2256	SHAFT SLEEVE	3196
76776-1	DEFLECTOR	3196	COMMON
76779-1203	IMPELLER	3796 ST	1.5X1.5-8
76782-1013	ADAPTER RING	3196 ST	1X1.5-8
76792	LANTERN RING	3196 MT	3X2-8
76797-1013	IMPELLER W/, RINGS	3196/3796 MT	1X2-10
76894-1000	DIAPHRAGM	3316 S	1.5X2-9
76894-1101	DIAPHRAGM	3316 S	1.5X2-9
76895-1101	DIAPHRAGM	3316 S	2X3-9
76977-2229	SLEEVE (PTO)	3735	COMMON
76979-2229	MECH SEAL, SLEEVE(RO-ROTT	3735
77112-6956	SLEEVE	3415	COMMON
77139-2229	SLEEVE, MECH., SEAL, TYPE 9T	3735	COMMON
77161	GLAND, SEAL	3196	COMMON
77162-2229	SLEEVE (FLUSH GLAND), B. WARNER TYPE QB	3196	1X1.5-6
77-2-1101	IMPELLER	3655	2.5X3-13
77225-6956	SLEEVE, PACKED BOX DESIGN	3196	COMMON
77235-2229	SLEEVE, JC T 8B-1T	3196
77-242-1-1000	IMPELLER	3305S	2X3-9
77-3-1102	IMPELLER, MAX DIAMETER	3655
77-3-1203	IMPELLER	3655 M	4X6-13
77-53-1001	BEARING HSG.	3405 S	COMMON
77-56-1-1101	IMPELLER L/RINGS (MD: 12.00″)	3405	4X6-12
77-59-1001	BEARING HSG., (GREASE)	3405	COMMON
77-60-1001	BEARING HOUSING, COOLED, GREASE LUBE	3405 M	5X8X12
77-64-01-1102	IMPELLER, LESS RING	3405 M	8X10-12
7764-1-1000	IMPELLER	3405	8X10-12
77725-6956	SLEEVE – PACKED BOX DESIGN, UNBALANCED MECH. SEALS	3196
77-83-1001	BEARING HSG.(GREASE LUBE)	3405	COMMON
77-86-1000	PEDESTAL	3405 L	6X8-22DV
78-168-1-1101	IMPELLER (MD:	3655	2X3-7
78-168-1-1102	IMPELLER (MD:	3755 / 3655	2X3-7
78215-1001	BEARING HOUSING (GREASE)	3755	2.5X3-10
78-215-1001	BEARING, HOUSING(O.B)	3189M	3755M
78-220-1018	IMPELLER	3171	1.5X2-11
78-222-1018	IMPELLER	3171	2.5X3-11
78-223-1102	IMPELLER, (MD: 8.375″)	3171	4X4-8
78-232-1101	IMPELLER	3189	2.5X3-13
78-233-1018	IMPELLER	3171	3X4-13
78-234-1018	IMPELLER	3171	4X6-13
78-65-1-1101	IMPELLER, DISCHARGE, 2ND STAGE	3305	1.5X2-9
78-66-1-1101	IMPELLER, SUCTION, 1ST STAGE	3305	1.5X2-9
78766-1	DEFLECTOR	3196	COMMON
78951-1000	IMPELLER, LESS RINGS	3405	3X4-12
78951-1101	IMPELLER, (LESS RINGS)	3405	3X4-12
78951-1203	IMPELLER, (LESS RINGS)	3405	3X4-12
78-95-1-1203	IMPELLER (MD: 12.0″), (LESS RINGS)	3405	3X4-12
79-124-1203	IMPELLER, (2 VANE)	3135	3X8-14
79-125-1203	SIDEPLATE,, SUCTION	3135	3X6/8-14
79-175-1203	COVER, CASE	3715	10″
79-191-1000	BEARING HSG,, OUT.-GREASE	3189 L	COMMON
79-197-1203	SIDEPLATE, DISCHARGE	3135	4X12X18
79-198-1203	SIDEPLATE, SUCTION	3135	4X12X18
79-45-1203	SIDEPLATE,, DISCHARGE	3135	ALL 14″
79-46-1203	SIDEPLATE,, SUCTION	3135	4X10/12-14
79-86-1203	IMPELLER	3715	2X3-10
80-151-1-1203	IMPELLER L/RINGS (MD: 12.00″)	3405	4X6-12
80-20-1203	IMPELLER, (2/4 VANE)	3135	4X12-14
80-229-1000	SUCTION COVER	3171	2.5X3-8
80-229-1203	SUCTION COVER	3171	2.5X3-8
80-236-1000	COVER SUCTION	3171	4X3-13
80-237-1000	SUC COVER, (WET PIT)	3171	4X6X13
80-239-1000	STRAINER	3171	2.5X3-8
80329-2-0000	STEADY BEARING	3171	4X6-11H
80-45-01-1203	IMPELLER L/ RINGS,, (M.D. 12.00″)	3405	8X10-12DV
80-45-01-1209	IMPELLER-12″MD, LESS RING	3405	8X10-12
8049-30500-0000	BALL BEARING	3171
8049-30600	BEARING (OTBD), STANDARD-OIL	3196	3410 M
8049-30600.	BEARING (OTBD), STANDARD-OIL	3410	COMMON
8049-30900	BALL BEARING, THRUST (DBL)	3196MTX	OIL LUBE
8049-31100-0000	BALL BEARING	3171 L	COMMON
8049-31300	THRUST BEARING (OUTBOARD), DOUBLE ROW	3196
8050-20760	BEARING (INBD), OIL-LUBE	3410	COMMON
8050-20765	RADIAL BEARING (GRS FOR LIFE)	3196	1X1.5-8
80502-0840	RADIAL BEARING (INB)	HS	10″
8050-21160	BEARING	3410 XL
8050-21160	BEARING	3410 XL
8050-21160	BALL BEARING, COUPLING	3410 L
8050-21160	BALL BEARING, COUPLING	3410 L
8050-21260	BALL BEARING-, RADIAL	3700 M
8050-21460	BALL BRG-RADIAL	3700	6X8-13A
8050-22241	BALL BEARING – INBD, GREASE LUBE	3175
8050-30760	BALL BEARING-, THRUST	3405 M
8050-30960	INBOARD, BEARING	3196
80503-1040	RADIAL BEARING (INB)	HS	12″
8050-31060	BALL BRG-CPLG	3406	10X12-17
8050-31160	BALL BEARING, (INBD)-OIL	3196	2X3-13
8050-31260	BALL BEARING CPLNG END	3415	COMMON
8050-31360	BALL BEARING, (INBD)-OIL	3196 XLT
8050-31560	BALL BEARING-, COUPLING	3415 M	COMMON
8050-31740	BALL BRG-INBD, OIL LUBE	3175 M	COMMON
8050-36624	BEARING	VHS
8050-46324	BEARING	SEAF	24X24-24
8050-61834	BEARING	VHS
8055-30600	BALL BEARING, OUTBOARD	3196-ST	COMMON
8055-30666	THRUST BEARING (GRS FOR LIFE)	3196	1X1.5-8
8055-30800-0000	BALL BEARING	3171	COMMON
8055-30930	BALL BEARING (OTB), (REGREASEABLE)	3196
8055-31200	BALL BRG.-THR., (RING OILED SLEEVE BRGS)	3415	COMMON
8055-31300	BALL BEARING, OUT BOARD	3196 XLT
8055-31500	BALL BEARING-, THRUST	3415 M	COMMON
8055-31560	BALL BEARING-, COUPLING END	3415 M
80572-0821	THRUST BEARING (OTB)	HS	10″
80573-1021	THRUST BEARING (OTB)	HS	12″
8057-31729	BEARING	VHS
8057-32425	BEARING	SEAF	24X24-24
8060-31314	ROLLER BEARING	3180
80860-10	ANTI-ROTATION, PIN CASE	3410 L	10X12-17
80860-9	ANTI-ROTATION PIN,, CASE WEAR RING	3410	4X6-13H
81-29-2210	SHAFT, HEAD	3171
81-30-2229	HEAD, SHAFT, W/ LOCKNUT	OR3171
81-96-1203	IMPELLER	3171	4X6-13
83-106-1-1203	IMPELLER, LESS RING	3735	1X1.5-8
83-112-1-1203	IMPELLER, DIA. 7.85″	3735	4X6-11GM
83-118-1001	PEDESTAL,, COOLED	3735 M	1X1.5-8
83-219-1203	SUCTION COVER	3199T	1X1.5-6T
83-220-1203	IMPELLER	3171	1-1.5X6
83-229-1203	IMPELLER	3171	1X1-5
83-229-1204	IMPELLER	3171	1X1-5
83-242-1000	IMPELLER (MAX, DIA:4 7/8″)	3171	1X1-5
83-243-1000	SUCTION COVER	3199	1X1.5-6
83-244-1000	IMPELLER	3171	1X1.5-6
83-244-1020	IMPELLER	3199	1X1.5-6
83-244-24-1018	IMPELLER, DIA: 5 7/8″	3171	1X1.5-6
83-84-1000	SUCTION COVER	3171 L	11″
84008-137	RETAINING RING	3405
85735-402	CAP SCREW, ADAPTER TO CASE, 12 REQ.	3175
85735-402-2228	CAP SCREW, ADAPTER TO CASE, 12 REQ.	3175
8601-0004	BRG LOCKNUT	3316-S	2X3-9
8601-0005-0000	BEARING, LOCKNUT	3171	2.5X3-8
8601-0006	BEARING, LOCKNUT	3316M/3196ST	COMMON
8601-0008	BEARING, LOCKNUT	3405	COMMON
8601-0008-0000	BEARING, LOCKNUT	3171	COMMON
8601-0009	LOCKNUT, BRG	3196	COMMON
8601-0010	BEARING, LOCKNUT	3196	COMMON
8601-0011	LOCKNUT, BRG	3180 S	COMMON
8601-0011-0000	BEARING, LOCKNUT	3171 L	COMMON
8601-0012	LOCKNUT, BRG	3415/3700	COMMON
8601-0013	BRG LOCKNUT	3196
8601-0015	BEARING LOCK, NUT-BALL BEARG	3415 M	COMMON
8601-0017	BEARING, LOCKNUT	3175	COMMON
8601-0022	BEARING LOCKNUT	3175
8601-009	BEARING, LOCK NUT	3171
8601-3015	LOCKNUT BRG.	3180 L	COMMON
8601-3018	LOCKNUT BRG.	3180 XL	COMMON
8690-02013	OIL SEAL- OUTBOARD	3410	COMMON
8690-02112	OIL SEAL,, BRG. END COVER	3316	COMMON
8690-03212	OIL SEAL,, BRG. HOUSING	3316 L	COMMON
8690-10121	OIL SEAL	LB	4X6-14
8690-10164	THRUST BRG LAB, SEAL W/O’RINGS	SEAF	14″X14″
8690-11220	OIL, SEAL, OUTBOARD	3196	COMMON
8690-13518	OIL SEAL INBD	3175 M	10X12-18
8690-15070	OIL SEAL	SEAF	24X24-24
8690-17645	OIL, SEAL, INBOARD	3196	COMMON
8690-21228	RADIAL BEARING LIP SEAL	3196
8690-21230	OIL SEAL-OUTBD	3410
8690-23732	OIL SEAL-BRG END COVER	3335	210
8690-23732.	OIL SEAL-BRG END COVER, (THRUST)	3335	210
8690-28003	OIL SEAL CPLG, END	3175 M	10X12-18
8690-41158	OIL SEAL,, BRG END COVER	3316	COMMON
8690-41514	OIL SEAL, COUPLING END	3175
8690-41528-4152884	INBOARD OIL, SEAL (INSIDE)	5500	6X6-22
8690-41543-35020	OUTBOARD OIL, SEAL (INSIDE)	5500	6X6-22
8690-41627	OIL SEAL	LB	4X6-14
8690-41748	OIL SEAL	VHS
8690-43155	OIL SEAL, INBOARD	3175
8690-45517-34985	OUTBOARD OIL, SEAL (OUTSIDE)	5500	6X6-22
8690-45537-46800	INBOARD OIL, SEAL (OUTSIDE)	5500	6X6-22
8690-47071	SEAL THRUST, GREASE	3171
8690-471650000	LIP SEAL	3171	2.5X3-11
8690-47166	OIL SEAL, BRG END COVER	3316	COMMON
8690-47201	OIL SEAL-INNER	3405/3316
8690-47239	OIL SEAL-CPLG	3405 L
8690-47239	OIL SEAL-CPLG	3405 L
8690-48322	OIL SEAL-LIP- FRM MNTED	3298	2X3-6
8690-62000	GREASE SEAL, OUTBD, GREASE LUBE	3199
8690-62021	OIL SEAL, GREASE LUBE	3755
8690-64324	OIL SEAL-GRS. LUBE	3655
8690-69360	LAB SEAL	3175
8690-71187	OIL SEAL, FRM. MNTD. PWR. END (LIP)	3298	2X3-8
8690-72015	OIL SEAL- INBD	3410
87067 0078	STATIONARY SEAT CHEKSEAL, ONLY-DYN SEAL	3196
87067 0082	SEAT, STATIONARY CHEKSEAL, ONLY-DYN SEAL	3196
88-161-1002	BRG HOUSING, COUPLING	3360	4″ 4 STG
88-6-1101	SIDEPLATE,, SUCTION	3135 S	4X12-14
8890-48640	OIL SEAL	SEAF	30″X30″
8890-99310	OIL SEAL	SEAF	30″X30″
8910-0004	BRG LOCK WSHER	3316-S
8910-0005	LOCKWASHER	3171	2.5X3-11
8910-0006	BEARING, LOCKWASHER	3316M/3196ST	COMMON
8910-0008	BRG LOCK WSHER	3405 L
8910-0009	BEARING LOCK, WASHER	3196
8910-0010	BEARING LOCK, WASHER	3196 LTX
8910-0012	BEARING, LOCKWASHER	3415	COMMON
8910-0013	BRG LOCKWASHER	3196
8910-0021	BEARING, LOCKWASHER	3420 S	20X24-28
8910-0022	BEARING LOCKWASHER	3175
8910-0024	LOCKWASHER, BEARING	SEAF	24X24-24
9001100300	RADIAL BEARING	JC	1.5X2X14
9001105300	THRUST BEARING	JC	1.5X2X14
9008-01633	GREASE FITTING	3410
9008-31365	BREATHER, OIL LUBE	3175
9008-31365-0012	BREATHER	3196 LTX	3X4-13
90161-0001	MECH. SEAL ROTARY UNIT-J.C., 1 SNGL INS UNBAL. M. SEAL	3316 M	SEAT 1-BP171
90224-2-2226	GLAND BOLT,, QUENCH GLAND	3316 L
90282-13-5108	GASKET-SLEEVE, TO IMP	3410	COMMON
90282-14-5108	GASKET-SLEEVE, TO IMP	3410	COMMON
90282-15-5108	GASKET, SHAFT SLEEVE	3410	COMMON
90284-1203	BUSHING,, STUFFING BOX	3405	COMMON
90285-1203	BUSHING, STUFFING BOX	3405/3316
91105-3-2229	INTER. BEARING, SLEEVE	3935	BP-40
91-148-1000	IMPELLER	3460	8X10
91335-1203	DIAPHRAGM	3316	1.5X2-9
91967-1216	SHAFT SLEEVE	3196	COMMON
91967X	SLEEVE	3196	COMMON
91967X-2156	SHAFT SLEEVE, PACKED BOX	3196	COMMON
91967X-2229	SLEEVE	3196
91967X-2230	SLEEVE	3196
91967X-2248	SLEEVE	3196
91987-13-1203	WEAR RING-CASE, FOR IMP W/RINGS (FLASHED)	3415	10X12-22
91987-7	BEARING – CARBON	3900	1.5X2-7
91991-25-1203	IMPELLER, 2/4 VANES	3175	4X6-18
91991-61-1203	IMP W/ BALANCE, HOLES 6V 22.5″	3175	12X14-18
91991-63-1203	IMP W/ BALANCE, HOLES 4V 20.5″	3175	12X14-22
91991-92-1203	IMP-5VANE,WITH, BALANCE HOLES	3175	8X8-12
91991-94-1203	IMPELLER (3V), W/ BAL HOLES	3175	8X8-12
9199X1-94-1203	IMP W/ BALANCE, HOLES(3 VANE)	3175	8X8-12
92159-2249	SHAFT	3450
92168-12-2151	KEY IMPELLER	3335	HDB 210-12
92394-2230	SLEEVE, STD BORE, DURA TYPE PT,PTO,PTO-HW	3196LF	COMMON
92479-5	PIPE PLUG, CASING DRAIN	3175
92479-5-1209	PIPE PLUG, CASING DRAIN	3175
92479-5-2232	PIPE PLUG,	3175
92593-6958	SLEEVE, (PACKED BOX)	3196	COMMON
96-218-1102	IMPELLER	3755	5X5-7
96-250-1-1000	IMPELLER	3755	1.5X2-9M
96-250-1-1102	IMPELLER	3655/3755	1.5X2-9
96250-1203	IMPELLER	3655	1.5X2-9
97-135-1101	IMPELLER	3755	1.25X.5-7
97-20-1-1102	IMPELLER	3655/3755	2X2.5-9
97-20-1-1203	IMPELLER	3655 M	2X2.5-9
97-55-1102	IMPELLER	3655/75 S	2.5X2.5-6
97-55-1203	IMPELLER	3655/75 S	2.5X2.5-6
98-13-1-1000	IMPELLER	3755	3X4-7
98-13-1-1101	IMPELLER	3655 M	3X4-7
98-13-1-1102	IMPELLER	3755	3X4-7
98-20-1-1102	IMPELLER	3755	2.5X3-9
99-180-1203	IMPELLER	3715	3X4-10
A00003E5225122	GASKET, EXPELLER	5500	8X10-29
A00003E528-5122	GASKET	5500	6X6-22
A00004E710-5130	VELL GASKET	HS	COMMON
A00017A07-1102	OIL RING, THRUST	3415 S	16X18-18
A00017A08-1101	OIL RING, BALL BEARINGS	3415 M	COMMON
A00017A13-1104	OIL RING	3700	3X4-16L
A00027B01-2229	WASHER	3199	1X1.5
A00027B03-2229	WASHER, IMPELLER	3171
A00046A01-5130	GASKET, END COVER	3700
A00046A02-5130	GASKET-END COVER	3700	6X8-13A
A00086A01-2156	SCREW, IMP.	3700	1X2-11AS
A00086A01-2229	SCREW, IMP.	3700	1X2-11AS
A00086A03-2229	SCREW, IMP.	3700	FRAME L
A00086A03-2239	SCREW, IMP.	3700	FRAME L
A00086A03-2256	SCREW-IMPELLER	3700
A00121G053-2213	IMPELLER KEY	HS	3X3-10
A00124E	SHAFT	5000	4X4-18
A00128G044-5130	GASKET	HS	10×10-26
A00144A175	RETAINING RING – IMPELLER	3410	4X6-13H
A00152A01	PLUG-OIL DRAIN	3196
A00152G018-5129	GASKET, CASE	HS
A00152G073-6129	GASKET	HS	10×10-26
A00187B01-5121	DEFLECTOR	3171	2.5X3-8
A00187B02-5121	DEFLECTOR	3171	COMMON
A00187B03-5121	DEFLECTOR	3171 L	8X10-11
A00250B162-6245	STEADY BRG, RETAINING RING	3171
A00250B212-6245	RETAINING RING-STEADY BRG	3171	3X4-11
A01015A01	IMPELLER NUT	3655	1.25X1.5-8
A01015A02	IMPELLER NUT	3655	2.5X3-13
A01044A01	GASKET, .175″X8″X8-7/16	3735
A01044A02	GASKET, CASE TO COVER	3735	1.5X2-9
A01044A03	GASKET CASE	3735 M	1X2-11
A01044A07	GASKET CASE	3735 L	3X6-13
A01045A02	GASKET, CASE TO COVER	3700 S	9″
A01045A03	GASKET, CASE TO COVER	3700 S	1X2-11A
A01045A04	GASKET,, CASE TO COVER	3700
A01045A05	GASKET,CASE TO, COVER	3700 L	16″
A01045A10	GASKET,CASE TO, COVER	3700 L	4X6-19N
A01045A11	GASKET, CASING	3900	1.5X2-7
A01049A14	GASKET, GLAND	3700	COMMON
A01049A19	GASKET, GLAND	3700
A01049A20	GASKET, GLAND	3700	3X4-16
A01063A06	PACKING, STUFFING BOX	3196 MT	4X6-10
A01063A09	PACKING S.B, BOX 1 SET	3405 M
A01063A10	PACKING	3316
A01063A12	PACKING, STUFFING BOX	3196 XLT
A01063A41	PACKING, (PACKED BOX ONLY)	3410
A01063A42	STUFFING BOX PKNG	3410
A01063A45	PACKING, STUFFING BOX	3410	6X8-22
A01075A112-5026	PACKING STF/BX	3450
A01075A153-5026	PACKING, FOR GLAND	3316	1.5X2-9
A01075A163-5026	PACKING-GLAND	3196 MT	4X6-10
A01075A172-5026	PACKING, GLAND	3175
A01075A174-5026	PAKING GLAND	3175
A01075A175-5026	PACKING GLAND	3415 S	COMMON
A01075A255-5026	PACKING	3415	COMMON
A01075A266-5026	PACKING	3175
A01081A06	PACKING, STUFF BOX, PACKED BOX	3196
A01081A07	PACKING, STUFF BOX, PACKED BOX	3196
A01081A08	PACKING, FOR STUFF BOX	3316	1.5X2-9
A01081A14	PACKING, STUFFING BOX	3196
A01095A-1001	CASE, WEARING	3316	1.5X2-9
A01095A-1618	CASE, WEAR RING	3316	1.5X2-9
A01117A02	DEFLECTOR, FOR (J.C. 8-1T MECH. SEAL)	3107
A01154A03	SIGHT GLASS, (OIL LUBE)	3196 MT	1/2″NPT
A01154A05	SIGHT GLASS, STND./OIL LUBE	3196	1″NPT
A01186A01	BRG. END, COVER TRUST	3410	COMMON
A01186A02	BRG. END COV, THRUST	3410	12X14-15XL
A01302A57	GASKET, HEAD	3620	6X8-10.5
A01302A59	GASKET, HEAD (INNER)	3620
A01302A60	GASKET, HEAD (OUTER)	3620	6X8-10.5
A01302A63	GASKET, HEAD	3620	12X14-19S
A01302A64	GASKET, HEAD	3620	12X14-19S
A01359B01-1000	STEADY BEARING, HOUSING ASSY	3171 L	6X8-13
A01535B 0000	GREASE SEAL THRST BRG LOW	3171	2.5X3-13
A0153B-0000	GREASE SEAL THRST BRG	3171 M	3X4-11
A02480E-1228	STUFFING BOX COVER, (HC600)	5500	12X14-38
A02668E	STUFFING BOX COVER	5500	4X6-29
A02677E	POWER END	5500
A02714E	STUFFING BOX COVER	5500	8X10-29
A02719E	STUFFING BOX COVER	5500	8X10-29
A02720E	STUFFING BOX COVER, (HC600)	5500	8X10-29
A02815A37-2441	STUD, SIDEPLATE	3180
A02815A39-2441	STUD, GLAND	3180 S
A02831A-2229	ANTI-ROTATION PIN,, CASE WEAR RING	3410	8X10-12M
A02948E-1228	STUFFING BOX COVER, (HC600)	5500	12X14-38
A03124A03	O’RING, IMPELLER	3196
A03158A01	CHEKSEAL	3196
A03158A02	CHEKSEAL	3196
A03158A04	CHEKSEAL	3196	XLTX
A03189A01-5127	GASKET, SIDE, PLATE	3180	3X6-12
A03189A02-5127	GASKET, SIDE, PLATE	3180	14″
A03189A03-5127	GASKET, SIDE, PLATE	3180	8X10-16
A03189A04-5127	GASKET SIDE PLATE	3180
A03189A05-5127	GASKET SIDE, PLATE	3180 L/XL
A03189A06-5127	GASKET SIDE, PLATE	3180 XL
A03190A01-2213	IMPELLER KEY	3180	COMMON
A03190A01-2255	IMPELLER KEY	3180	COMMON
A03190A02-2213	IMPELLER KEY	3180	COMMON
A03190A02-2255	IMPELLER KEY	3180	COMMON
A03190A03-2213	IMPELLER KEY	3180	COMMON
A03190A03-2255	IMPELLER KEY	3180	COMMON
A03190A04-2213	IMPELLER KEY	3180	COMMON
A03190A04-2255	IMPELLER KEY	3180	COMMON
A031B9A03-5127	SIDEPLATE, GASKET	3185 L	8X10-16
A03712A-3201	OIL THROWER, (OIL LUBE)	3196	3X4-13
A03768A-6308	LANTERN, RING PACKED	3196 X	6X8
A03782A01-5174	DIAPHRAGM SEAL	3180
A03782A02-5129	DIAPHRAM SEAL, DO NOT USE. USE:…..-5174	3180
A03782A02-5174	DIAPHRAGM SEAL	3180
A03782A03-5174	DIAPHRAGM, SEAL (STD), FITTINGS, DYN. SEAL	3180
A03782A04-5174	DIAPHRAGM, SEAL, STD. FITTINGS, DYN. SEAL	3180
A05105A01	IMPELLER WASHER	3196	4X6-17
A05166A02	MECHANICAL SEAL, J-C TYPE 1 2.125″	3196	C vs SI CAR
A05305E025-5129	GASKET	HS	3X3-10
A05375E000	LAB SEAL W/O-RING	3171
A05376E0000000	BEARING LAB., SEAL	3171	4X6-11H
A05403A-6267	BEARING KEY	3298	1X1.5-8
A06032A-6255	IMPELLER WEAR RING, (CARBON/TEFLON)	3298	2X3-8
A06034A-6359	BEARING KEY	3298	2X3-8
A06561A-1001	END COVER, RADIAL	3180
A1406-1107	BEARING,, LIMESHAFT	VIT-FF	3X6 AHC/5STG
A-1884-1102	COLLAR SAND	14JMO/1
A2054-1003	BELL,SUCTION	VIC	8X4 JLO
A2060-1102	IMPELLER	VIC	8X4 JLO
A2061-6911	BOWL,INT.	VIC	8X4 JLO
A2062-6911	BOWL, TOP	VIC	8X4 JLO
A2189-5914	SHAFT COUPLING	VIF-FF	10X14 HMC
A2309-1102	LANTERN RING	VIC	8X4 JLO
A6344-1-5932	PLATE, ADJ.	VIC	8X4 JLO
A6352-1-5932	HUB, DRIVER	VIC	8X4 JLO
A6411-1-2201	LUG	VIC	8X4 JLO
A6411-1-5932	LUG	VIC	8X4 JLO
A68600F000-1003	RETAINER, BEARING	VIC-T	3 STAGE
A6863-1003	BEARING RETAINER	14JLO/1
A6863-1011	RETAINER, BRG	VIC	8X4 JLO
A7351-1104	BEARING	VIC	8X4 JLO
A7509-1171	IMPELLER, S/N 305753	VIT FF	16X28 TLO
A7515-1203	IMPELLER	VIF-FF	10X14 HMC
A81090F000-2217	THRUST RING	VIC-T	3 STAGE
A8372-5-2201	RING, RET.	VIC	8X4 JLO
A8372-5-2297	RING, RET.	VIC	8X4 JLO
A9634-6703	SLEEVE	ALC 9 STAGE	3X7
A9733-2-6132	LINE SHAFT BRG	VIT-FF	6X13
A97770F000-1018	IMPELLER-VERTICAL	HMC	12X8
B00003805-5136	GASKET-SUCTION, CVR TO CASING	3171	2.5X3-8
B00003806-5136	GASKET-SUCTION, CVR TO CASING	3171	3X4-11
B00003808-5136	GASKET-SUCTION, CVR TO CASING	3171 M
B00003812-5136	GASKET-DISCHRG, FLANGE	3171
B00003813-5136	GASKET-DISCHRG, FLANGE	3171	3X4-11
B00003814-5136	GASKET-DISCHRG, FLANGE	3171 M	4X6-13
B00003B05-5136	GASKET COVER	3171	1X1.5-8
B00003B10-5136	GASKET- DISCHARGE	3171	1X1.5-8
B00003B14-5136	GASKET, DISCHARGE	3171	4X4-8
B00049A-1000	BASEPLATE-CAMBER TOP, BP#1
B00050A-1000	BASEPLATE-CAMBER TOP, BP#2	3196
B00051A-1000	BASEPLATE, #3, 8 1/4″ CNTR HGT, MAX MTR FRM 365T	3196
B00055B06-2229	IMPELLER SCREW, W/LOCKING PELLET	3171	2.5X3-11
B00058A-1000	BASEPLATE-CAMBER TOP, BP#2,8-1/4″	3196
B00112A01-2229	SLEEVE-SUCT 2B SEAL	3333	CB10-18J
B00129A07-1204	BUSHING STUFF, BOX	3700	FRAME L
B00129A07-2229	BUSHING STUFF., BOX	3700	FRAME L
B00129A21-2244	THROAT BUSHING -, SEAL CHAMBER COVER	3700(8th ED)	6X8-13A
B00130A01-2156	WASHER, IMP.	3700	1X2-11AS
B00130A01-2229	WASHER, IMP.	3700	1X2-11AS
B00130A03-2210	WASHER, IMP.	3700	FRAME L
B00130A03-2229	WASHER, IMP.	3700	FRAME L
B00178B-0000	BEARING END COVER SEAL, HARD RUBBER	3171	2.5X3-8
B00204A01-5115	GASKET COVER, DYNAMIC SEAL	3196	10″
B00204A02-5115	GASKET COVER/, DYNAMIC SEAL	3196	13″
B00204A04-5117	GASKET COVER, DYNAMIC SEAL	3196	8″
B00214A-1001	BEARING CAP	3415	COMMON
B00218A-1001	BEARING CAP	3415	18X20-22H
B00229E000-5159	LANTERN RING	5500	4X6-29
B00230E000-5159	LANTERN RING	5500	6X6-22
B00241A	LANTERN RING	3415 S
B00256B01-0000	BEARING,STEADY	3171	2.5X3-11
B00266B01-0000	STEADY BEARING	3171	2.5X3-8
B00266B01-0000	STEADY BEARING	3171	2.5X3-8
B00266B02-0000	STEADY BEARING	3171	COMMON
B00266B03-000	STEADY BEARING	3171 L	COMMON
B00269B04-0000	STEADY BEARING, 1 BEARING PER HSG	3171	4X6-11H
B00277A	LANTERN RING	3415 M	18×20-22H
B00277B01-0000	STEADY BEARING	3171	COMMON
B00277B02	STEADY BEARING, 1 BRNG, PER HSG	3171
B00277B08-0000	STEADY BEARING	3171
B00294A-6956	SHAFT SLEEVE, (HARD-COATED)	3175	COMMON
B00295A-6956	SHAFT SLEEVE, (HARD-COATED)	3175	COMMON
B00295A-6958	SHAFT SLEEVE, (PACKED)	3175	8X10-18H
B00296A-6956	SHAFT SLEEVE, (HARD-COATED)	3175	COMMON
B00296A-6958	SHAFT SLEEVE, (HARD-COATED)	3175	COMMON
B00297A-6956	SLEEVE	3175	COMMON
B00374G000-2217	SLEEVE	HS	10×10-26
B00399A-5108	GASKET – S.B. TO BACKPLATE, (DYNAMIC SEAL)	3175	18″
B00474A03-3211	BUSHING – THROAT, (PACKED BOX ONLY)	3410	COMMON
B00474A04-3211	BUSHING – THROAT, (PACKED BOX ONLY)	3410
B00474A05-3211	STUFFING BOX, BUSHING	3410 L
B00474A06-3211	BUSHING-THROAT, (PACKED BOX ONLY)	3410
B00476A05-3211	STUFFING BOX, BUSHING	3410 L
B00490A-6956	SHAFT SLEEVE,, DYNAMIC SEAL	3175	COMMON
B00590B01-0000	CASING COLLAR	3171	2.5X3-8
B00590B03-0000	CASING COLLAR	3171	2.5X3-8
B00617A-6956	SHAFT SLEEVE, (HARD-COATED)	3460	14L
B01031A-6956	SHAFT SLEEVE-, DYNAMIC SEAL	3175	COMMON
B01041A-5130	GASKET-END, COVER	3410 M	COMMON
B01042B01-5026	PACKING RING (DRY PIT)	3171	2.5X3-11
B01047A-2210	SLEEVE, OIL RING	3420	30X30-31
B01068A-1000	END COVER,, BEARING	3410
B01070A01-1203	SLEEVE (FOR PACKING)	3410
B01070A01-1618	SLEEVE, OPTIONAL ON S SHAFT	3410	4X6-13H
B01122A01-2210	SLEEVE, CPLG	3420 S	20X24-28
B01122A02-2210	SLEEVE, THRUST	3420 S	20X24-28
B01143A-5130	GASKET END CVR	3410
B01167B-1117	IMPELLER	VIT	12RJHC
B02001A-1000	BRG. END COVER	3410	COMMON
B02024A01-1203	DO NOT USE, SEE: RB02024….	3410	8X10-14
B02024A05-1203	CASE RING	3410 M	6X8-14
B02024A07-1203	CASE WEAR RING	3410	4X6-13HS
B02024A08-1203	WEARING RING, CASE	3410 XL	12×14-15
B02091A-1001	FRAME FOOT 10″	3196
B02092A-1001	FRAME FOOT 8.25″	3196
B02151A03-1203	NUT IMPELLER	3180
B02151A03-1216	NUT, IMPELLER	3180 S
B02151A04-1203	NUT IMPELLER	3180
B02152A03-1203	IMPELLER NUT	3180
B02152A04-1203	NUT IMPELLER	3180
B02153A-6127	SLEEVE BEARING, I.B. ROT.DRIV	3296 S	1×1.5×6
B02154A-6127	SLEEVE BEARING, O.B. ROT.DRIV	3296 S	1×1.5×6
B02155A-6127	SLEEVE BEARING, O.B. STAT.DRIV	3296 S	1×1.5×6
B02156A-6127	SLEEVE BEARING, I.B. STAT.DIRV	3296 S	1×1.5×6
B02157A-6127	THRUST, BEARING	3296 S	1×1.5×6
B02188A01-6308	LANTERN RING	3180	COMMON
B02188A02-6308	LANTERN RING	3180 M	COMMON
B02188A03-6308	LANTERN RING	3180	COMMON
B02191A01-3211	BUSHING, THROTTLE	3180 S	COMMON
B02191A02-3211	BUSHING, THROTTLE	3180 M	COMMON
B02191A03-3211	BUSHING, THROTTLE-FITTINGS, PACKED BOX	3180
B02218A03-5127	GASKET, BACKPLATE	3180	14″
B02218A04-5127	GASKET BACKPLATE	3180	16″
B02218A05-5127	GASKET, BACKPLATE	3180	16″
B02218A06-5127	GASKET, BACKPLATE	3180	19″
B02218A07-5127	GASKET, BACKPLATE	3180	22″ & 25″
B02274A02-6308	LANTERN RING	3420
B02293A01-1000	BEARING HOUSING (DUPLEX BRG), GREASE	3196
B02299A-1605	SLEEVE	3196	COMMON
B02299A-2156	SLEEVE	3196	4X6-17
B02299A-2229	SLEEVE	3196	COMMON
B02299A-2230	SLEEVE, PACKED BOX	3196	COMMON
B02299A-2232	SLEEVE, (FOR PACKING)	3196 X17	COMMON
B02301A-6956	SHAFT SLEEVE-, PACKED	3196	COMMON
B02426A-6267	BEARING SPIDER	3298	2X3-6
B02468A-6127	IMPELLER THRUST BEARING	3298
B02469A-6255	IMPELLER THRUST BEARING	3298	1X1.5-8
B02473A-6127	BEARING, RADIAL	3298
B02474A-5411	RADIAL BEARING, (1 PIECE)	3298	1X1.5-8
B02475A-6359	BEARING SPACER	3298	1X1.5-8
B02476A-6127	REVERSE THRUST BEARING	3298	1X1.5-8
B02478A-6127	STATIONARY SHAFT	3298	1X1.5-8
B02481A-6255	IMPELLER THRUST BEARING	3298	2X3-6, 1X2-10
B03044A01-1001	THROAT BUSHING	3620	8X10-10.5
B03044A01-2245	BUSHING, THROAT	3620
B03044A02-2245	BUSHING, THROAT	3620
B03044A04-1001	BUSHING, THROAT	3620
B03100A-6255	IMPELLER THRUST BEARING	3298	2X3-8
B03101A-6127	IMPELLER THRUST BEARING	3298	2X3-8
B03103A-5411	RADIAL BEARING, (1 PIECE)	3298	2X3-8
B03104A-6127	RADIAL BEARING, ( 1 PIECE)	3298	2X3-8
B03105A-6359	BEARING SPACER	3298	2X3-8
B03106A-6127	REVERSE THRUST BEARING	3298	2X3-8
B03734A-2229	SLEEVE, MECH SEAL FOR, X-200 CART.SEAL2GS264293	3196
B04038A-6270	BEARING SPIDER	3298	1X1.5-8
B10006-1203	GLAND (DRY PIT), UPPER	3171	4X4-8
B10051-13-1203	CASING 150# RF FLANGES	3196	1X1.5-8
b10051-31-1203	CASING, 300#RF FLANGS	3196 ST	1×1.5-6
B1005-15-1203	CASING, RF FLAN. 150#	3196 ST	2×3-6
B10150-1203	ADAPTER RING	3196	8″
B10150-1204	ADAPTER RING	3196	1X1.5-8
B10163-1203	SLEEVE	3175 XL	18X18-22
B10174-6306	DIFFUSOR	3333	CB10-18
B102-804-1001	BEARING END COVER (INB), GREASE LUBE	3175
B102-806-1001	BEARING END COVER INBD, (GRS LUBE)	3175
B10330F000-1203	IMPELLER, 1 STAGE	VIT-CF	12X18 LHC
B10548	DIFFUSER	3333	CB5-18
B10558-2-1001	BEARING HOUSING	3175	COMMON
B10585 5 3211	LOCKWASHER, IMP	3700
B-10585-5	LOCKWASHER,IMPELLER	3700
B-10857-1203	CASE WEAR RING	3405 M	6X8-14
B11103-01-2229	SPACER SLEEVE	3335	HDB 210-12
B11866F-4-1-9999	LINE SHAFT	2IT-FF
B12847F16706	BEARING, DISCHARGE		1.9X1.5-1.5
B1L10M3SNPX052	BACK PULLOUT, OIL LUBE,L/IMP	3196 MTX	1X2-10
B2240-8-6-2227	SHAFT	VIC	8X4 JLO
B2253	SPLIT GLAND	VIT-FF
B2749-42130	STUFFING BOX GASKET	ALC 9 STAGE	3X7
B274945136	COLUMN/BOWL,, GASKET	VIS-9ALC3
B30344A04-1001	THROAT BUSHING	3620
B-3167-1203	IMPELLER	VIT	12X18B
B4359-1-1007	WEAR RING,, BOWL	VITT-FF	3X6 AHC/5STG
B4742-1123	IMPELLER, WEAR RING	9ALC3
B5128-1203	IMPELLER, (KEYED)	VIT-CF	10AHC
B51430F000-1117	IMPELLER	VIT	9AHX
B-6616	SHELL BEARING	OR3171-M	3X4-13
B7304-2-6132	BEARING,, SUCTION	VIT-FF	6X13AHC,5STG
B75818HN3P0442	BACK PULLOUT, COMPLETE OIL	3175	8X10-18H
B801822N3PR512	BACK PULLOUT, PACKED BOX GREASE	3180	18X18-22
B806016N3PR512	BACK PULLOUT-PACKED BOX, GREASE LUBE	3180	6X10-16
B806016NSPR512	BACK PULLOUT-PACKED BOX, GREASE LUBE	3180	6X10-16
B858016NSP512	BACK PULLOUT, LESS IMPELLER	3185 L	8X10-16
B85830F000-1117	IMPELLER	VIT	9AHC
C00017A-1203	WEAR RINNG CAS, IMP. W/RING	3420 S	16X18-30
C00042A01-1222	R.H. SHAFT NUT	3300	4X6-10/5 STG
C00042A02-1222	L.H. SHAFT NUT	3300	4X6-10/5 STG
C00047A04-1227	PRESSURE REDU-, CING SLEEVE	3300	4X6-10/5 STG
C00049A02-1227	SHAFT SLEEVE, INTERSTAGE	3300	4X6-10/5 STG
C00081A-1203	WEAR RING,, CASE	3420	20X24-24
C00090A02-1216	SIDEPLATE (FOR 6V IMP.)	3175	8X10-14
C00090AO2-1203	S.SIDEPLATE, 6 VANE IMP	3175	8X10-14
C00090AO2-1216	S.SIDEPLATE, 6 VANE IMP	3175	8X10-14
C00143A02-1203	IMPELLER	3196	3X4-7
C00143A02-1216	IMPELLER	3196	3X4-7
C00202A-1203	EXTENSION-BACKPLATE	3198	3X4-10
C00263A01-1000	BEARING END COVER, THRUST, 7th ED.	3700	4X6-13
C00288A22-1232	RING, WEAR CASE	3700	1.5X3-9
C00288A23-1232	RING, WEAR SB COVER	3700
C00288A46-1232	WEAR RING – CASE	3900	1.5X2-7
C00288A56-1299	WEAR RING, SB CVR SIDE	3700/3900	1.5X3-9
C00288A58-1299	WEAR RING-IMPL, (CASE SIDE)	3700	1.5X3-9
C00288A62-1299	WEAR RING – IMPELLER	3900	1.5X2-7
C00288A71-1265	WEAR RING FOR S IMPELLER	3700	6X8-13A
C00288A75-1265	WEAR RING, IMP, N-IMP	3700 L	3X4-16N
C00288A76-1120	WEAR RNG, IMP., S-IMP (BACK)	3700	3X4-16L
C00288A76-1216	WEAR RING, S-IMPELLER	3700	3X4-16L
C00288A76-1299	WEAR RING,, S-IMPELLER	3700	3X4-16/N16
C00288A76-6955	WEAR RING, S-IMPELLER	3700	3X4-16L
C00288A76-6956	WEAR RING, S-IMPELLER	3700	3X4-16L
C00288A95-1120	WEAR RNG, IMP., S-IMP (FRONT)	3700	3X4-16L
C00288A95-1216	WEAR RING, S-IMPELLER	3700	3X4-16L
C00288A95-1299	WEAR RNG,, S-IMPELLER	3700 L	3X4-16/N16
C00288A95-6955	WEAR RING, S-IMPELLER	3700	3X4-16L
C00288A95-6956	WEAR RING, S-IMPELLER	3700	3X4-16L
C00293A02-1216	BACKPLATE, DYN, SEAL	3196	7.5″
C00293A02-3201	BACKPLATE, DYN. SEAL, FOR 7.50″ DIA. REPELLER	3196	10″
C00293A02-3211	BACKPLATE, DYN. SEAL, FOR 7.50″ DIA. REPELLER	3196	10″
C00297A04-1001	WEAR RING, CASE	3700	4X6-11N
C00297A06-1001	WEAR RING, BACKPLATE	3700	4X6-11N
C00297A07-1001	WEAR RING, COVER FOR, S – IMPELLER 8th EDITION	3700	1.5X3-11
C00297A09A-1001	WEAR RING, CASE, FOR S-IMPELLER	3900	2X4-11
C00297A21-1001	WEAR RING-COVER, FOR S&N – IMPELLER	3700	1X2-9
C00297A22A-1001	WEAR RING, CASE, FOR N-IMPELLER	3700	1X2-9
C00297A24A-1001	WEAR RING, CASE, FOR S-IMPELLER	3700	1X2-9
C00297A28-1001	WEAR RING-CASE, S-IMPELLER	3700	4X6-13
C00297A56A-1001	WEAR RING, S&N – IMPELLER, (S.B. COVER SIDE)	3700	1.5X3-11
C00297A59A-1001	WEAR RING,FOR S – IMPELLER, (CASING SIDE)	3700	1.5X3-11
C00297A62A-1001	WEAR RING, S-IMPELLER, (CASING SIDE)	3700	1X2-9
C00297A75-1001	WEAR RING-N-IMPLR, (CASING SIDE)	3700	4X6-16/N16
C00297A76-1001	RING, S-IMP., (SB CVR SIDE)	3700 L	3X4-16S
C00297A95A-1000	WEAR RING, CASING SIDE	3700 L	3X4-16S
C00297A98A-1001	IMPELLER WEAR RING FOR, S-IMP. CASE SIDE	3910	2X4-11
C00302A-1203	SLEEVE	3420	20X24-28
C00302A-6956	SLEEVE	3420	20X24-28
C00303A-1203	WEAR RING, 6 OR 7 VANE	3420	20X24-28
C003313A-1226	SLEEVE	3180 XL
C00333A50-6983	WEAR RING, CASING SIDE	3700	4X6-11N
C00333A50-6983.	WEAR RING, BACKPLATE SDE	3700	4X6-11N
C00333A75-6983	WEAR RING-N-, IMP.(SBC SIDE)	3700 L	4X6-16/N
C00333A75-6983	WEAR RING-N-, IMP.(SBC SIDE)	3700 L	4X6-16/N
C00333A75-6983	WEAR RING-N-, IMP(CASE SIDE)	3700 L	4X6-16/N
C00333A75-6983	WEAR RING-N-, IMP(CASE SIDE)	3700 L	4X6-16/N
C00334A-2229	SLEEVE	3700 S
C00334A-6956	SHAFT SLEEVE, (FOR PACKING)	3700	COMMON
C00335A-1203	SLEEVE, PACKED BOX	3700
C00335A-6956	SHAFT SLEEVE, PACKED BOX	3700	1X3-13A
C00342A-6956	SHAFT SLEEVE, (FOR PACKING)	3700	COMMON
C00342A-6987	SHAFT SLEEVE, (FOR PACKING)	3700 L	COMMON
C00352A01-1001	WEAR RING-COVER N-IMPLR	3700	4X6-16/N16
C00352A02-1001	WEAR RING, COVER S -IMP	3700 L	3X4-16S
C00352A04-1001	WEAR RING-CASE, FOR N-IMPLR	3700	4X6-16/N16
C00352A39-1001	WEAR RING, CASING	3700 L	3X4-16S
C00352A64-1001	WEAR RING-CASE, N-IMPELLER	3700	4X6-13
C00353A01-1265	WEAR RNG, CVR., N-IMPELLER	3700 L	3X4-16N
C00353A02-1120	WEAR RNG,SB CV, S-IMPELLER	3700	3X4-16L
C00353A02-1204	WEAR RNG,SB CV, S-IMPELLER	3700	3X4-16L
C00353A02-1204+MON	WEAR RNG,SB CV, W/S-MON INSERT	3700	3X4-16L
C00353A02-1216	WEAR RING CVER, S-IMPELLER	3700	3X4-16L
C00353A02-1232	WEAR RNG COVER, S-IMPELLER	3700 L	3X4-16/N16
C00353A02-6955	WEAR RING CVER, S-IMPELLER	3700	3X4-16L
C00353A02-6956	WEAR RING CVER, S-IMPELLER	3700	3X4-16L
C00353A04-1265	WEAR RNG, CASE, N-IMPELLER	3700 L	3X4-16N
C00353A08-1265	WEAR RING – COVER FOR, S – IMPELLER	3700	6X8-13A
C00353A39-1120	WEAR RNG, CASE, S-IMPELLER	3700	3X4-16L
C00353A39-1216	WEAR RING CASE, S-IMPELLER	3700	3X4-16L
C00353A39-1232	WEAR RNG, CASE, S-IMPELLER	3700 L	3X4-16/N16
C00353A39-6955	WEAR RING CASE, S-IMPELLER	3700	3X4-16L
C00353A39-6956	WEAR RING CASE, S-IMPELLER	3700	3X4-16L
C00353A45-1265	RING, CASE	3700 L	4X6-19N
C00358A01-6983	WEAR RING-CVR, N-IMPL.	3700 L	4X6-16/N
C00358A04-6983	WEAR RING-CASE, FOR N-IMPL.	3700 L	4X6-16/N
C00358A45-6983	RING, CASE, (HARDFACE)	3700 L	4X6-19N
C00358A45-6983	RING, CASE, (HARDFACE)	3700 L	4X6-19N
C00358A45-6983	WEAR RING-CASE, FOR N-IMPL.	3700 L	4X6-19N
C00358A45-6983	WEAR RING-CASE, FOR N-IMPL.	3700 L	4X6-19N
C00384G000-2156	SHAFT	MPAF	14X14-14
C00444A-2229	SHAFT SLEEVE	3700
C00445A-2229	SHAFT SLEEVE	3700 L
C00457A-1104	SHAFT SLEEVE	3410	6X8-14H
C00457A-1203	SHAFT SLEEVE	3410	COMMON
C00457A-1618	SLEEVE	3410
C00463A01-1203	WEAR RING-IMP, N, CASING SIDE	3700 L	4X6-19N
C00463A02-1203	WEAR RING-IMP, N, SB CVR SIDE	3700 L	4X6-19N
C00489F-EAJ-2227	SHAFT (4 STG), 1.688 X 48 1/2	VIC-T 11AX	AHC 6X8
C00500E000-1245	THROAT BUSHING	JVC	6X6-14
C00770E000-1241	SHAFT SLEEVE	5500	4X6-29
C00773B-1018	IMPELLER	3171	1X1.5-8
C00774E0001228	EXPELLER, B4 FRAME	5500	8X10-29
C00801B01-1000	STEADY BEARING HOUSING	3171
C00804E000-1241	SLEEVE	5500	6X6-22
C00888E000-1241	SLEEVE,, B2 BEARING FRAME	5500	3X4-18HP
C00889E000-1228	EXPELLER	5500	6X6-22
C00889E000-1228	EXPELLER	5500	6X6-22
C00889E000-1228	EXPELLER, DIAM. 17″	5500	6×6-22
C00889E000-1228	EXPELLER, DIAM. 17″	5500	6×6-22
C01013G000-1220	IMPELLER	AF/MPAF	10X10-10
C01027A-1203	SUCTION SIDEPLATE, (FOR 3V IMP. ONLY)	3175	3X6-12
C01027A-1216	SUCTION, SIDEPLATE	3175 S	3X6-12
C01035A-1203	SUCTION SIDEPLATE	3175	6X8-12
C01035A-1216	SUCTION, SIDEPLATE	3175	6X8-12
C01036A-1203	SUCTION SIDEPLATE, OBSOLETE CASE-3V IMP	3175 S	4X6-12
C01036A-1216	SUCTION, SIDEPLATE	3175 S	4X6-12
C01082A-1000	SUCTION SIDE, PLATE	3175-S	8X8-12
C01083A-1203	SIDEPLATE, SUCTION	3175	8X8-12
C01083A-1216	SUCTION, SIDEPLATE	3175 S	8X8-12
C01087A02-2244	SHAFT (213C098S)	3900	1.5X2-7
C01160A-1203	SLEEVE,SHAFT	3420	30X30-31
C01191A09-6929	BASEPLATE (PERMABASE), MAS. MTR FRAME 286T	3196
C01211A01-1203	BACKPLATE DYNAMIC SEAL	3196	8″
C01211A01-1216	BACKPLATE DYNAMIC SEAL	3196	8″
C01212A-1203	REPELLER, DYNAMIC SEAL	3196	1X1.5-8
C01212A-1216	REPELLER, DYNAMIC SEAL	3196	1X1.5-8
C01217A01-1216	REPELLER, DYNAMIC SEAL	3196	13″
C01217A02-1216	REPELLER, DYNAMIC SEAL	3196	15″
C01218A01-3211	BACK PLATE	3180	13″ XLT
C01218A03-3211	BACKPLATE DYN, SEAL	3196 XLT	15″
C01256A12-1203	IMP. RING	3420 LDS	30×30-38
C01291A01	LANTERN RING, (RNG OILED ROLLER BRG)	3420
C01293A04-1000	WEAR RING,CASE	3410 M	8X10-12/14
C01293A04-1104	WEAR RING,CASE	3410	8X10-14
C01293A04-1618	WEARING RING CASE	3410	8X10-12
C01293A08-1104	CASE RING	3410	6X8-14H
C01293A08-1618	CASE RING	3410 M	6X8-14H
C01293A09-1104	WEAR RING, CASING	3410 L	8X10-17H
C01293A09-1203	WEARING RING, CASE	3410-L
C01293A10-1618	WEAR RING, CASE	3410	4X6-13H
C01293A11-1104	WEAR RING, CASING	3410 L	10X12-17
C01297A02-1203	SIDE PLATE,, SUCTION (3V)	3175 S	4X6-12
C01297A02-1216	S.S. PLATE, (FOR 3V IMP)	3175 S	4X6-12
C01311A-1203	IMPELLER (4V), M.D. 12″	3175	4X6-12
C01311A-1216	IMPELLER	3175	4X6-12
C01312A-1203	S.S PLATE, (FOR 4V IMP)	3175 S	4X6-12
C01312A-1216	S.S PLATE, (FOR 4V IMP)	3175 S	4X6-12
C01313A01-1000	IMPELLER-1 STG	3316	1.5X2-9
C01313A01-1101	IMPELLER, 1ST STAGE L/RINGS, (MD: 9.50″)	3316	1.5X2-9
C01313A02-1000	IMPELLER-1 STG, W/RING	3316	1.5X2-9
C01313A02-1203	IMPELLER-1 STG, W/RING	3316	1.5X2-9
C01314A01-1000	IMPELLER-2 STG	3316 S	1.5X2-9
C01314A01-1101	IMPELLER-2 STG,L/RINGS, (M.D. 9.50″)	3316	1.5X2-9
C01314A02-1000	IMPELLER-2 STG, W/RING	3316 S	1.5X2-9
C01314A02-1203	IMPELLER-2 STG, W/RING	3316	1.5X2-9
C01343A-1000	BEARING HOUSING, CPLG	3410
C01345A01-1203	SUCTION, SIDEPLATE	3175-L	18X18-22H
C01365A-1000	HOUSING,, OIL RING	3420 S	20X24-28
C01386A01-1001	WEAR RING, IMP	3410 L	6X8-22
C01386A01-1618	WEAR RING, IMP	3410	8X10-12
C01386A02-1001	WEAR RING – IMPELLER	3410 M	8X10-11
C01386A06-1001	WEAR RING – IMPELLER	3410	6X8-14H
C01386A07-1001	WEAR RING, IMPELLER	3410 L	10X12-12
C01386A07-1001	WEAR RING, IMPELLER	3410 L	10X12-12
C01386A07-1001	WEARING RING, IMPELLER	3410 L	10×12-12
C01386A07-1618	WEAR RING, IMPELLER	3410	8X10-17H
C01934B-1000	BEARING SHELL, THRUST	3171
C01935B-1000	BEARING SHELL	3171 M	COMMON
C02254A01-5108	GASKET – SUCTION	3410	4X6-13H
C02254A02-5108	GASKET – DISCHARGE	3410	4X6-13H
C02261A01-5108	GASKET, CASING	3410	8X10-12
C02261A02-5108	GASKET, CASING	3410	8X10-12
C02265A01	IMP. WEARING, RING	3410 L	8X10-21
C02265A01-1203	WEAR RING, IMP	3410	COMMON
C02265A04-1203	WEAR RING, IMPELLER	3410	3X4-10
C02265A07-1203	WEARING RING, IMPELLER	3410	8X10-17H
C02265A09-1203	WEARING RING, IMPELLER	3410 XL	12×14-15
C02313A01-2244	SHAFT	3900	COMMON
C02322A-1104	SHAFT SLEEVE	3410 XL
C02322A-1203	SHAFT SLEEVE	3410 XL	COMMON
C02322A-1203	SHAFT SLEEVE	3410 XL	COMMON
C02402A-6956	SHAFT SLEEVE, (HARD COATED)	3410
C02416A02-1203	SIDE PLATE	3180	10×12-16
C02444E007	LABYRINTH SEAL	VHS	4X4-12
C02450A-1104	SHAFT SLEEVE	3410	COMMON
C02450A-1203	SHAFT SLEEVE	3410 L
C02470A01-5108	GASKET CASE	3410	8X10-17
C02470A02-5108	GASKET CASE	3410	8X10-17
C02495A122-5304	O’RING OUTBD, SEAL ROT.	3196
C02495A132-5304	O’RING, RADIAL, SEAL ROTARY	3196
C02495A133-5304	O’RING OUTBD, SEAL STAT.	3196
C02495A136-6359	O’RING, IMP.	3180 S
C02495A139-5304	O’RING-RAD LAB I.D.	HS
C02495A141-5302	O’RING, FOLLOWER	3180
C02495A142-6359	O’RING IMP.	3180 M	COMMON
C02495A144-5304	O’RING	3175
C02495A145-6359	O’RING, SHAFT SLEEVE	3175	COMMON
C02495A147-5304	O’RING OUTBD, SEAL STAT.	3196
C02495A148-5304	O-RING, RADIAL AND THRUST I.D	3180
C02495A148-6359	O’RING, IMPELLER AND SLEEVE	3180
C02495A152-5302	O-RING SLEEVE, NUT	3415 S	COMMON
C02495A152-6359	O’RING IMP.	3180 XL
C02495A154-5302	O-RING,, SLEEVE NUT	3415 M	18X20-22H
C02495A155-5302	O-RING IMP’L	3415 S	COMMON
C02495A155-5304	O-RING, LAB	3180
C02495A157-5301	O’RING CASING	3935	BP70-11
C02495A157-5302	O-RING, IMP	3415	COMMON
C02495A159-5302	O’RING, SHAFT NUT	3420
C02495A20-5304	O’RING OUTBD, SEAL ROT	3196
C02495A215-5302	O-RING, SHAFT	3316	1.5X2-9
C02495A221-5302	O-RING,, SHAFT SLEEVE	3405 M	COMMON
C02495A227-5302.	O-RING,, SHAFT SLEEVE	3405
C02495A229-5304	O’RING	3175
C02495A23-5308	O’RING, IMPELLER	3196NM	1X1.5-6
C02495A235-5308	O’RING FOLLOWER	3180
C02495A23-6359	O-RING, IMPL.	3196	COMMON
C02495A236-5302	O’RING BEARING, HOUSING	3196 NM	COMMON
C02495A237-5303	O-RING	SEAF	14″X14″
C02495A239-5302	O’RING, FOLLOWER, (STD)	3180
C02495A245304	O’RING OUTBD, SEAL STAT.	3196 STX
C02495A24-5304	O’RING SEAL, STATIONARY	3196
C02495A245-5302	O’RING BRG., HOUSING	3196	COMMON
C02495A24-6359	O-RING, IMPELLER SCREW	3175	COMMON
C02495A249-5302	O-RING-THRUST, END COVER	3700
C02495A251-5302	O’RING BRG. HSG	3196
C02495A252-5302	O-RING-END, COVER,CPLG	3700
C02495A258-5302	O’RING	3420 S	20X24-28
C02495A259-5303	O-RING	SEAF	30″X30″
C02495A261-5302	O’RING, BRG, HOUSING	3175	COMMON
C02495A261-5302.	O’RING, BRG, HOUSING	3175 S	COMMON
C02495A264-5302	O’RING, BEARING HOUSING	3180	COMMON
C02495A264-5304	O’RING SIDE, PLATE	3180 S	3X6-14
C02495A264-5304	O’RING SIDE, PLATE	3180 S	3X6-14
C02495A264-5304	O-RING SIDE, PLATE	3180 S	3X6-12
C02495A264-5304	O-RING SIDE, PLATE	3180 S	3X6-12
C02495A267-5302	O’RING SIDE, PLATE	3180 S	4X6-14
C02495A267-5304	O’RING SIDE, PLATE	3180 S	4X6-14
C02495A268-5302	O-RING BEARING, HOUSING	3175	COMMON
C02495A269-5302	O’RING SIDE, PLATE	3180 S
C02495A269-5304	O’RING SIDE, PLATE	3180 S
C02495A270-5302	O’RING HOUSING	3180 XL/3175	COMMON
C02495A271-5302	O’RING SIDE, PLATE	3180 M
C02495A271-5304	O’RING SIDE, PLATE	3180 M
C02495A273-5302	O-RING SIDE, PLATE	3180 L	4X8-19
C02495A273-5304	O-RING SIDE, PLATE	3180	4X8-19
C02495A275-5302	O-RING SIDE, PLATE	3180 L	6X10-19
C02495A275-5304	O-RING, SIDEPLATE	3180	6X10-19
C02495A276-5302	O-RING SIDE, PLATE	3180 L
C02495A276-5304	O-RING SIDE, PLATE	3180 L
C02495A279-5302	O-RING SIDE, PLATE	3180 L	8X10-22
C02495A279-5304	O-RING SIDE, PLATE	3180 L	8X10-22
C02495A28-5304	O-RING, IMP	3196
C02495A28-6359	O’RING,IMPELLER	3196
C02495A29-5309	O’RING – IMPELLER	3316	COMMON
C02495A31-5302	O-RING (SLEEVE, NUT)	3410	COMMON
C02495A31-5309	REVERSE THRUST BRG O-RING, (PFA/VITON)	3298	2X3-8
C02495A32-5304	O’RING OUTBD, SEAL ROT	3196 LTX
C02495A33-6359	O-RING, IMP	3316 M	COMMON
C02495A34-5304	O’RING INBD, SEAL ROT	3196 LTX
C02495A34-6359	O’RING,, IMPELLER	3196 XLT	COMMON
C02495A358-5308	O’RING, CASE TO BACKPLATE	3196NM	1X1.5-6
C02495A36-5302	O’RING SLEEVE, NUT	3410 L
C02495A377-5302	O-RING	3180	COMMON
C02495A379-5303	CONTAINMENT SHELL, O-RING	3298
C02495A379-5309	CONTAINMENT SHELL, O-RING	3298	1X2-10
C02495A380-5302	O’RING	JCU	3X4-11
C02495A381-5302	O’RING SIDE, PLATE	3180 L
C02495A381-5304	O’RING SIDEPLATE, PLATE	3180
C02495A381-5308	O’RING, CASE TO BACKPLATE	3196NM	3X4-13
C02495A383-5302	O’RING SIDE, PLATE	3180 L/XL
C02495A383-5304	O’RING SIDE, PLATE	3180 L/XL
C02495A384-5304	O’RING SIDE, PLATE	3180 XL
C02495A38-5304	O-RING OUTBD, SEAL STAT	3196
C02495A385-5304	O’RING SIDE, PLATE	3180 XL
C02495A39-5302	O’RING, SHAFT SLEEVE	3405	12X14-14DV
C02495A39-5304	O’RING, SHAFT SLEEVE	3196 LTX
C02495A39-6359	O-RING,, IMPELLER	3405 3316
C02495A452-5302	O’RING, SIDEPLATE	3175 S	COMMON
C02495A456-5302	O-RING,, SIDEPLATE	3175	COMMON
C02495A463-5302	O-RING, SIDEPLATE	3175	COMMON
C02495A468-5302	O-RING,, SIDEPLATE	3175	10X12-18
C02495A471-5302	O-RING,, SIDEPLATE	3175	COMMON
C02495A472-5302	O-RING, S.C./CASING	5500	6X6-22
C02495A475-5302	O-RING SIDEPLATE	3175	COMMON
C02547A02-1203	SUCTION SIDEPLATE	3180	6X10-16
C02547A02-1216	SUCTION SIDEPLATE	3180	6X10-16
C02547A02-9931	SUCTION, SIDEPLATE	3185 L	6X10-16
C02548A02-1203	SUCTION SIDEPLATE	3180	6X8-16
C02548A02-1216	SUCTION SIDEPLATE	3180	6X8-16
C02574A02-1203	SUCTION SIDEPLATE	3180-3185	8X10-16
C02574A02-9931	SIDEPLATE, SUCTION	3185 L	8X10-16
C02575A01-1001	SIDEPLATE	3180	16X16-19
C02575A02-1203	SIDEPLATE,, SUCTION	3180-3185	16X16-19
C02576A02-1203	SIDEPLACE, SUCTION W/O ORNG	3185L	14X14-16
C02578A02-1203	SIDEPLATE, W/O O-RING	3180 M	12X12-14
C02581A-6470	POLYSTER PUMP COVER	3171NM
C02586A01-1003	SIDEPLATE	3180	14X16-22
C02586A02-1203	SIDEPLATE, SUCTION	3180	14X16-22
C02586A02-1216	SIDEPLATE, SUCTION	3180	14X16-22
C02650A-2229	SHAFT SLEEVE	3700	1X3-13
C02652A-1220	CASING	3196	1×1.5-6
C02662A01-2229	SLEEVE	3700
C02663A01-2229	SHAFT SLEEVE	3700
C02706A01-1001	SIDEPLATE	3180	4X6-19
C02706A02-1203	SIDEPLATE	3180	4X6-19
C02710A02-1203	SIDEPLATE	3180	8X8-12
C02711A01-1001	SIDEPLATE	3180 M	10X10-14
C02711A02-1203	SIDEPLATE	3180 M	10X10-14
C02711A02-1216	SUCTION SIDEPLATE	3180	10X10-14
C02711A02-1233	SIDEPLATE	3180 M	10X10-14
C02713A02-1203	SIDEPLATE, SUCTION	3180-3185	12X14-19
C02713A02-1216	SIDEPLATE, SUCTION	3180	12X14-19
C02715A02-1203	SIDEPLATE	3180	4X6-12
C02725A02-1203	SIDEPLATE	3180	6X8-12
C02731A02-1203	SUCTION, SIDEPLATE	3180 M	6X8-14
C02732A-1203	IMPELLER-OPEN W/ O’RING, 5 VANE (M.D. 22.52″)	3180	12X14-22
C02733A02-1203	SIDEPLATE, SUCTION	3180	12X14-22
C02736A-1203	IMPELLER, 5 VANE	3180	4X6-14
C02736A-1216	IMPELLER, 5 VANE	3180	4X6-14
C02737A01-1001	SIDEPLATE	3180	4X6-14
C02737A02-1203	SUCTION SIDE, PLATE	3180	4X6-14
C02737A02-9932	SUCTION SIDE, PLATE	3180	4X6-14
C02742A01-1001	SIDE PLATE	3180 M	8X8-14
C02745A02-1203	SIDEPLATE, SUCTION	3180	6X10-22
C03015A01-1001	SUCTION SIDEPLATE	3180	3X6-12
C03015A02-1203	SUCTION SIDEPLATE	3180	3X6-12
C03020A02-1203	SUCION SIDEPLATE	3180	10X14-25
C03025A02-1203	SIDEPLATE, SUCTION	3180	8X10-19
C03028A01-1003	SIDEPLATE	3180	6X10-19
C03028A02-1203	SIDEPLATE, SUCTION	3180-3185	6X10-19
C03028A02-1204	SIDEPLATE, SUCTION	3180-3185	6X10-19
C03030A02-1204	SUCTION SIDEPLATE	3180	8X10-22
C03030A02-1216	SUCTION SIDEPLATE	3180	8X10-22
C03033A02-1203	SUCTION SIDEPLATE	3180	10X12-19
C03035A02-1203	SUCTION, SIDEPLATE	3180-3185	3X6-14
C03039A02-1203	SUCTION SIDEPLATE	3180	10X12-22
C03046A02-1203	SUCTION SIDEPLATE	3180	6X10-25
C03049A-1203	IMPELLER	3296	1×1.5×6
C03061A02-1203	SIDEPLATE, SUCTION	3180	18X18-22
C03079A-1001	FRAME FOOT	3180	19″ + 22″
C03081A-1001	FRAME FOOT	3180	25″
C03125A01-1001	SIDEPLATE	3180	4X6-16
C03125A02-1203	SUCTION SIDEPLATE	3180	4X6-16
C03125A02-1216	SIDEPLATE	3180	4X6-16
C03149A01-1000	BEARING, HOUSING	3180 S	COMMON
C03149A02-1000	BEARING, HOUSING	3180	COMMON
C03161A03-1001	END COVER, RADIAL	3180
C03172A-1203	IMPELLER	3296	2X3-10
C03173A-1226	SLEEVE, STD. PACKING, w/ O-RING	3180-3185	COMMON
C03174A-1226	SHAFT SLEEVE, w/ O-RING, (STD. PACKED)	3180-3185	COMMON
C03174A-2232	SHAFT SLEEVE, (STD. PACKED)	3180 M	COMMON
C03200A-1226	SHAFT SLEEVE, (DYN SEAL) W/TEF O’RING	3180
C03201A-1226	SHAFT SLEEVE, (DYN SEAL) W/TEF O’RING	3180 M	COMMON
C03202A-1226	SHAFT SLEEVE, (DYN SEAL PACK BOX)	3180	COMMON
C03203A-1226	SLEEVE,, DYN. SEAL	3180
C03209A-6956	SHAFT SLEEVE, (HARD COATED)	3180 S
C03213A-1000	BEARING, HOUSING	3180	COMMON
C03231A-1226	SLEEVE, SHAFT, (PACKED BOX)	3180	COMMON
C03231A-2230	SLEEVE, SHAFT, (PACKED BOX)	3180	COMMON
C03241A-1226	SLEEVE, STD. PACKING	3180-3185	COMMON
C03246A-6956	SHAFT SLEEVE	3180
C03251A-1203	STUFFING BOX, COVER	3180	4X6-14
C03251A-1216	STUFFING BOX, COVER	3180 S	4X6-14
C03262A-1203	IMPELLER	3500	3X6-14
C03262A-1209	IMPELLER	3500	3X6-14
C03265A-1203	IMPELLER	3296	2X3-13
C03287A-1203	COVER, ST. BOX, 2 PIECE,M.SEAL	3180 S	4X6-14
C03305A-1209	SIDEPLATE, SUCTION	3500 S	3X6-14
C03310A-1226	SHAFT SLEEVE, MECH SEAL	3180 S	COMMON
C03312A-1226	SLEEVE, SHAFT, (MECH SEAL)	3180 L	COMMON
C03313A-1226	SHAFT SLEEVE, MECH SEAL	3180 XL	COMMON
C03333A-1203	IMPELLER	3296	2X3-8
C03340A-1000	BEARING, HOUSING – OIL	3196
C03362A-1203	IMPELLER	3296	3X4-8G
C03365A-1216	REPELLER, DYNAMIC SEAL	3196	17″
C04083A03-1203	REPELLER	3180 M	8X8-14
C04084A01-1203	REPELLER	3180	16″
C04085A01-1203	REPELLER	3180	16″ + 19″
C04085A01-1216	REPELLER	3180	16″ & 19″
C04090A02-1203	BACKPLATE	3180 S	12″
C04091A02-1216	BACKPLATE	3180	14″
C04092A02-1203	BACK PLATE	3180 SM	16″
C04092A02-1216	BACKPLATE	3180	16″
C04092A04-1203	BACKPLATE	3180 L	16″
C04093A02-1203	BACKPLATE	3180	19″
C04093A04-1203	BACK PLATE	3180 L	19″
C04094A02-1203	BACKPLATE	3180 XL	19″
C04095A02-1203	BACKPLATE	3180 XL	22″
C04098A02-1203	BACKPLATE, (DYNAMIC SEAL)	3175	18″
C04099A03-1203	BACKPLATE,, DYNAMIC SEAL	3175 L	22″
C04365A-6949	CONTAINMENT SHELL	3298
C04366A-1001	FRAME FOOT	3196
C04373A01-6267	IMPELLER ASSY	3298	1X1.5-6
C04373A02-6267	IMPELLER ASSEMBLY	3298	1X1.5-8
C04373A03-6267	IMPELLER ASSEMBLY	3298	2X3-6
C04384A02-1000	DRIVE MAGNET ASSY., (182TC-184TC)	3298
C04384A02-6-9109	DRIVE MAGNET ASSY., 182TC-184TC MOTORS	3298	1X1.5-6
C04475A-6268	CASING, 150 FOOT MOUNTED	3298	2X3-8
C04480A-1203	IMPELLER 4V	3175	20X24-28
C04483A02	IMPELLER ASSEMBLY	3298	2X3-8
C04488A-6267	BEARING SPIDER	3298	2X3-8
C04489A-6270	BEARING SPIDER	3298	1X2-10
C04494A-6127	STATIONARY SHAFT	3298	2X3-8
C04497A-2238	DRIVE SHAFT, FRM. MNTD. PWR. END	3298	1X2-10
C05497A-1203	SEAL CHAMBER 1 PIECE DESIGN, TAPER BORE PLUS	3180	3X6-12
C05498A-1203	SEAL CHAMBER 1 PIECE DESIGN, TAPER BORE PLUS	3180	4X6-14
C06001A-1203	SEAL CHAMBER 1 PIECE DESIGN, TAPER BORE PLUS	3180	6X8-16
C06003A-1216	STUFFING BOX COVER, (TAPER BORE PLUS)	3180	8X10-16
C06009A-1203	SEAL CHAMBER, TAPER BORE; ONE PIECE	3180	12X14-19
C06009A-1216	SEAL CHAMBER, TAPER BORE; ONE PIECE	3180	19″
C06022A-1000	SEAL CHAMBER, TAPERBORE+, ONE PIECE	3180	16″
C06025A-1000	SEAL CHAMBER TAPER BORE, PLUS, ONE PIECE	3180	19″
C06332A03-6267	IMPELLER ASSEMBLY	3298	2X3-6
C2495A227-5302	O’RING, SHAFT SLV	3405
C3003-1-2216	SHAFT	ALC 9 STAGE	3X7
C4509CKN4-2216	SHAFT, PUMP	VIF-FF	10X14 HMC
CO1293A09-1001	WEARING RING, CASE	3410-L	10X12-15X
CO1293A09-1001	WEARING RING, CASE	3410-L	10X12-15X
D00010E000-1228	SUCTION COVER (PAT #:62196), (HC600)	5500	12X14-38
D000145A-1203	IMPELLER, 4 VANE	3175	12X14-22
D00052A-1000	BEDPLATE (447), HA: 26″ HB: 86″ HX: 4″	3175
D00054A	BASEPLATE AND CPLG GUARD	3175	3X6-14
D00055A-1000	BEDPLATE, BP#2, CAM TOP, 365T	3196
D00080A01-1203	IMP,1ST STAGE,, (NO RINGS) MD: 11.00″	3316	2X3-11
D00080A02-1203	IMP,1ST STAGE,, (WITH RINGS) MD: 11.00″	3316	2X3-11
D00080A03-1203	IMPELLER-SUCTION, 1ST STAGE	3316	3X4-11G
D00081A01-1203	IMP,2ND STAGE, (NO RINGS) MD: 11.00″	3316 M	2X3-11
D00081A02-1203	IMP,2ND STAGE,, (WITH RINGS) MD: 11.00″	3316 M	2X3-11
D00091A	BASEPLATE, (445T MTR 150HP)	3410
D00125A02-1203	IMPELLER 5 VANE, (MD: 22.50″)	3175	6X8/12-22
D00128A02-1203	IMPELLER 5 VANE, (MD: 17.50″)	3175	6X8-18
D00128A02-1216	IMPELLER 5VANE, (MD: 17.50″)	3175	6X8/12-18
D00129A01-1102	IMPELLER, 5 VANES	3175	4X6/10-18
D00129A02-1203	IMPELLER 5 VANE (M.D. 17.50″)	3175	4X6/10-18
D00129A02-1216	IMPELLER, 5V, BAL. TO .5 MILS	3175	4X6-18
D00130A01-1102	IMPELLER, 4 VANES	3175	6X8-14
D00130A02-1203	IMPELLER 4 VANE, (MD: 14.00″)	3175	6X8-14
D00130A02-1216	IMPELLER, 4 VANES	3175	6X8-14
D00137A02-1203	IMPELLER 5 VANE, (MD: 14.00″)	3175	4X6-14
D00137A02-1216	IMPELLER, 5 VANE	3175	4X6-14
D001386A02	IMPELLER, 3 VANES	3175	3X6/8-12
D00139A02-1203	IMPELLER, (M.D. 14.0), 5 VANES	3175	3X6-14
D00139A02-1216	IMPELLER, 5 VANES	3175	3X6/8-14
D00145A-1203	IMPELLER, 4V (M.D. 22.50″)	3175	12X14/18-22
D00145A-1216	IMPELLER (4 V)	3175	12X14-22
D00150A01-1102	IMPELLER, 6 VANES	3175	8X10/14-14
D00150A02	IMPELLER	3175	8X10-14
D00150A02-1203	IMPELLER 6 VANE, (MD: 14.00″)	3175	8X10-14
D00150A02-1216	IMPELLER, (M.D: 14.00″), 6 VANES	3175	8X10-14
D00157A02-1101	IMPELLER, 4 VANES	3175	8X10-18
D00157A02-1203	IMPELLER (M.D. 17.50″), 4 VANES	3175	8X10-18
D00157A02-1204	IMPELLER, 4 VANES	3175	8X10-18
D00157A02-1216	IMPELLER, 4 VANES	3175	8X10-18
D00159A02-1203	IMPELLER (5V)	3175	3X6-14
D00223A-1220	CASING 150#FF FLANGES	3196X	2X3-10MTX
D00229A-1220	CASING, 150#FF FLANGES	3196	3X4-13
D00247A01-1012	CASING	3196	3X4-7
D00247A02-1203	CASING	3196	3X4-7
D00247A02-1216	CASING	3196 MTX	3X4-7
D00247B08-2205	SHAFT W/KEY W 4IN. ST. BOX, ASSY #4 PD 3 1/2	3171
D00247B13-2216	SHAFT, ASSY, NO#7	3171	2.5X3-8
D00247B18-2205	SHAFT W/KEY W 4IN. ST. BOX, ASSY #9 PD 6	3171
D00247B30-2216	SHAFT W/KEY, 4″ ST. BOX	3171	1X1.5-8
D00247B35-2205	SHAFT, NO 18, PD 10.5	3171	2.5X3-8
D00247B58-2205	SHAFT, ASS#:29, PD 16	3171
D00247B70-2205	SHAFT, ASS#:35, PD 19	3171
D00247B74-2216	SHAFT W/KEY, 4″ ST. BOX	3171	2.5X3-11
D00281B-1000	CASING, WET-PIT	3171	1X1.5-8
D00282B-1203	CASING, WET-PIT	3171	1X1.5-8
D00286B-1203	CASING, (WET PIT)	3171	2.5X3-8
D00297A-1203	IMPELLER, 7 VANE	3175	8X10-18
D00297A-1216	IMPELLER, 7 VANE	3175	8X10-18
D00298E000-1228	SUCTION COVER, (HC600)	5500	4X6-21
D00303E000-1228	IMPELLER, (HC600)	5500	4X6-21
D00305A01-1203	CASING, NO TAPS	3175	16X18-22
D00305E000-1228	IMPELLER (PAT #:62223), (HC600) (MD: 34.00″)	5500	12X14-38
D00327A	STUFFING BOX, COVER	3198 MT	1.5X3-10
D00327A-9639	D.I. BACKPLATE	3198	3X4-10
D00336E000-1228	SUCTION COVER, (HC600)	5500	8X10-21
D00358B23-2216	SHAFT, NO 12, PD 7.5	3171 M	4X6-13
D00358B25-2205	SHAFT, NO 13, PD 8	3171	COMMON
D00358B25-2216	SHAFT, NO 13, PD 8	3171	COMMON
D00358B43-2205	SHAFT	3171	2.5X3-8
D00358B45-2216	SHAFT W/KEY W/O S.B ASSY, NO 23 PD 13	3171	4X6-11H
D00358B45-2230	C-20 SHAFT W/KEY, W/OUT S.B ASSY NO 23 PD 13	3171	4X6-11H
D00361E0001228	IMPELLER, EXPELLER	5500	8X10-29
D00362E000-1228	SUCTION COVER, (HC600)	5500	6X8-26
D00363E000-1228	IMPELLER, (HC600)	5500	6X8-26
D00411A-1000	BRG. FRAME, (STND)	3175	COMMON
D00412A-1000	BRG. FRAME, (STND)	3175	COMMON
D00412E000-1228	IMPELLER	5500	6X6-18
D00413A-1000	BRG. FRAME, (STND)	3175	COMMON
D00452A01-1012	CASING	3196 MT	3X4-10H
D00452A02-1203	CASING	3196 MT	3X4-10H
D00452A02-1216	CASING 150#FF FLANGES	3196	3X4-10H
D00484A-1203	SUCTION SIDE, PLATE (7 VANE)	3175 M	8X10-18
D00484A-1216	SUCTION SIDE, PLATE (FOR 7 VANE IMP)	3175 M	8X10-18
D00497A02-1216	BACKPLATE DYN SEAL	3196	13″
D00497A02-3211	BACKPLATE- DYNA SEAL	3196	13″
D00498A01-1216	REPELLER, DYNAMIC SEAL, 10″ DIA.	3196	13″
D00498A02-1215	REPELLER, 7.5″	3196	10″
D00498A02-1216	REPELLER, DYNAMIC SEAL, 7.5″ DIA.	3196	10″
D00498A03-1216	REPELLER, DYNAMIC SEAL, 6.5″ DIA.	3196	10″
D00605A-1003	CASING	3175 S	8X8-12
D00609A02-1203	IMPELLER, 3 VANES	3175	6X8-12
D00617A02-1203	IMPELLER (3V) (M.D.12.00″)	3175	4X6-12
D00617B30-2216	SHAFT W/4in. ST. BOX ASSY, NO. 15, PD 9	3171
D00617B39-2205	SHAFT W/KEY, W/O S.B. ASSY	3171	1X1.5-6
D00617B41-2205	SHAFT W/KEY, W/O S.B. ASSY	3171
D00654A01-1101	IMPELLER (LESS RINGS), (MD: 18.00″)	3410	10X12-17
D00680A01-1203	CASING	3175	3X6-12
D00682A01-1203	CASING	3175 S	8X8-12
D00682A01-1216	CASING	3175 S	8X8-12
D00683A-1203	CASING	3175 S	6X8-12
D00683A-1209	CASING	3175 S	6X8-12
D00683A-1216	CASING	3175 S	6X8-12
D00735B-1000	BEARING SHELL	3171 L	COMMON
D00745B-1203	ADAPTER	3171	6X8-13
D00751B24-2205	SHAFT, NO 12, PD 7.5	3171 L
D00846B-1000	CASING, (WET PIT)	3171	8X10-11
D00847B-1203	CASING, (WET PIT)	3171	8X10-11
D008717A23-6242	LABY SEAL, INBD	3175
D01032A03-1182	IMPELLER	3700	6X8-16A
D01047A07-9436	N-IMPELLER, W/, IMP RINGS	3700	4X6-19N
D01093A02-1203	IMPELLER,, 5 VANE	3175	8X8-12
D01099	SHAFT SLEEVE	3755 M	1.5X2-9
D01324A-1000	FRAME ADAPTER	3175	12″
D01351A01-1013	IMPELLER, 6 VANES	3175	6X8/12-12
D01351A02-1203	IMPELLER 6 VANE, (MD: 12.00″)	3175	6X8/12-12
D01351A02-1209	IMPELLER, 6 VANES	3175	6X8/12-12
D01351A02-1216	IMPELLER, 6 VANES	3175	6X8/12-12
D01364A01-1000	FRAME	3700	COMMON
D01386A02-1203	IMPELLER, (M.D. 12.00″), 3 VANES	3175	3X6-12
D01386A02-1216	IMPELLER, 3 VANE	3175	3X6-12
D02384A01-1216	REPELLER, DYNAMIC SEAL, 10″ DIA.	3196	13″
D02384A02-1216	REPELLER, DYNAMIC SEAL, 7.5″ DIA.	3196	10″
D02384A03-1216	REPELLER, DYNAMIC SEAL, 6.5″ DIA.	3196	10″
D02402A02-1101	IMPELLER, WITH RINGS	3410	6×8-17
D02446A01-1203	CASING	3175	4X6-12
D02446A01-1216	CASING	3175	4X6-12
D02450A-1203	CASING, (SAME AS 249-64-1203)	3196	2X3-13
D02450A-1215	CASING	3196	2X3-13
D02450A-1216	CASING	3196	2X3-13
D02451A-1012	CASING	3196	2X3-13
D02459A02-1203	IMPELLER (3V), (MD: 12.00″)	3175	8X8-12
D02467A01-1203	IMPELLER, 5 VANES	3175	18X18-22H
D02474A01-1104	IMPELLER L/RINGS, (MD: 14.00″)	3410	6X8-14H
D02478A01-1000	IMPELLER, LESS RINGS	3410	8X10-12
D02478A01-1101	IMPELLER	3410	8X10-12
D02488A01-1012	CASING, FOR S/N ABOVE 263B350	3196	8X10-13
D02488A02-1203	CASING, FOR S/N ABOVE 263B350	3196	8X10-13
D02498A01-1101	IMPELLER, LESS RINGS	3410	6X8-11M
D02614A02-1101	IMPELLER W/RINGS	3410	4X6-11
D02616A01-1102	IMPELLER,, LESS IMP RINGS	3410	6X8-14
D02621A01-1101	IMPELLER,, LESS RINGS	3410	8X10-14
D02624A01-1000	IMPELLER L/RINGS, (MD: 11.50″)	3410	8X10-11
D02624A01-1101	IMPELLER LESS RINGS	3410	8X10-11
D02626A01-1000	IMPELLER LESS, RINGS	3410	4X6-9
D02640A01-1102	IMPELLER, (NO IMP RINGS)	3410	10X12-12
D02641A-1000	BRG HSG – CPLG	3410	COMMON
D02656A01-1203	IMPELLER LESS RINGS	3410	3X4-10
D02657A01-1203	IMPELLER L/RINGS, (MD: 13.50″)	3410	4X6-13
D02659A01-1203	IMPELLER, LESS RINGS	3410	6×8-17
D02661A01-1203	IMPELLER L/RINGS, (MD: 11.00″)	3410	2X3-11
D02661A02-1203	IMPELLER W/RINGS, (MD: 11.00″)	3410	2X3-11
D02664A01-1203	IMPELLER L/ RINGS, (MD: 15.25″)	3410	4X6-15
D02665A01-1203	IMPELLER, (MD: 14.0″), LESS IMP RINGS	3410	6X8-14
D02666A01-1203	IMPELLER	3410	8X10-12
D02667A01-1203	IMPELLER, LESS IMP. RINGS, (MD: 14.00″)	3410	8X10-14
D02668A01-1203	IMPELLER (MD: 11.50″), LESS RINGS	3410	8X10-11
D02671A01-1203	IMPELLER, (LESS RINGS)	3410	6X8-14H
D02691A-1101	IMPELLER LESS RINGS	3410	4X6-13H
D02692A01-1203	IMPELLER LESS, RINGS	3410	4X6-13H
D02694A01-1000	IMPELLER, (MD: 21.00″)	3410	8X10-21
D02694A01-1203	IMPELLER	3410	8X10-21
D02694A01-1203	IMPELLER	3410	8X10-21
D02694A02-1203	IMPELLER, (WITH RINGS)	3410	8X10-21
D02702A-1000	FRAME ADAPTER	3175	18″
D02711A01-1000	IMPELLER,, MAX DIA: 15.00″	3410	10X12-15
D03003A01-1000	IMPELLER, (NO IMP RINGS)	3410	12X14-15
D03003A01-1101	IMPELLER, (NO IMP RINGS)	3410	12X14-15
D03004A01-1000	IMPELLER L/RINGS, (MD: 21.50″)	3410	6X8-22
D03004A01-1101	IMPELLER LESS RINGS	3410	6X8-22
D03030A01-1203	IMPELLER, MAX DIA: 15″	3410	10X12-15
D03035A01-1203	IMPLLER (LESS RINGS), (MD: 18.00″)	3410	10X12-17
D03036A01-1203	IMPELLER, LESS RINGS	3410	8X10-17
D03036A01-1215	IMPELLER, LESS RINGS, (M.D. 17.50″)	3410	8X10-17
D03039A01-1203	IMPELLER L/RINGS	3410	8X10-17H
D03043A01-1203	IMPELLER	3410	10×12-14L
D03046A01-1203	IMPELLER, (MD: 21.50″), LESS RINGS	3410	6X8-22
D03047A01-1203	IMP (12.375)	3410	10X12-12H
D03047A01-1203	IMP (12.375)	3410	10X12-12H
D03048A01-1203	IMPELLER, (NO IMP RINGS)	3410	12X14-15
D03150A02-1203	CASING W/O TAPS, OPEN IMPELLER	3180	6X8-16
D03150A02-1216	CASING W/O TAPS, FOR OPEN IMPELLER ONLY	3180	6X8-16
D03215A01-1003	CASING W/O TAPS, FOR OPEN IMPELLER	3180	10X12-16
D03215A02-1203	CASING	3180	10X12-16
D03215A02-1216	CASING,, WITHOUT TAPS	3180	10X12-16
D03215A04-1216	CASING,, WITH TAPS	3180	10X12-16
D03226A01-1003	CASING-FOR OPEN IMP	3180	6X10-16
D03226A02-1203	CASING-FOR, OPEN IMPELLER	3180	6X10-16
D03226A02-1216	CASING- FOR, OPEN IMPELLER	3180	6X10-16
D03237A02-1203	CASING W/O TAP, OPEN IMP	3180	12X12-14
D03241A01-1003	CASING FOR OPEN IMPELLER	3180	14X16-22
D03241A02-1216	CASING W/O TAPS, OPEN IMP	3180	14X16-22
D04564A02-1203	IMPELLER ( 5V), W/ TEFLON O-RING	3196	6X8-17
D04564A02-1216	IMPELLER ( 5V), W/ TEFLON O-RING	3196	6X8-17
D04566A01-1003	CASING FOR OPEN IMPELLER	3180	4X6-19
D04566A02-1203	CASING, FOR OPEN IMPELLER	3180	4X6-19
D04566A02-1216	CASING	3180	4X6-19
D04567A01-1012	CASING	3196	4X6-17
D04567A02-1203	CASING	3196	4X6-17
D04567A03-1220	CASING	3196	4X6-17
D04568A02-1203	IMPELLER, 5V W/BLNCE HOLES, W/O’RING, (MD: 16.75″)	3196	8X10-17
D04568A02-1216	IMPELLER W/O’RNG 5V W/BLNCE, HOLES (MD:16.75″)	3196	8X10-17
D04570A01-1003	CASING, FOR OPEN IMPELLER	3180	12X14-19
D04570A02-1203	CASING,NO TAPS, FOR OPEN IMP	3180	12X14-19
D04570A02-1216	CASING,NO TAPS, FOR OPEN IMP	3180	12X14-19
D04571A01-1003	CASING W/O TAPS, FOR OPEN IMPELLER	3180	10X10-14
D04571A01-1203	CASING W/O TAPS, FOR OPEN IMPELLER	3180	10X10-14
D04571A02-1203	CASING,NO TAPS, FOR OPEN IMP	3180	10X10-14
D04571A02-1233	CASING,NO TAPS, FOR OPEN IMP	3180 M	10X10-14
D04572A02-1203	CASING,, WITHOUT TAPS	3180 S	8X8-12
D04574A01-1012	CASING	3196	8X10-17
D04574A02-1203	CASING,NO TAPS, 150#FF FLANGES	3196	8X10-17
D04574A02-1216	CASING	3196	8X10-17
D04576A-1203	CASING – FOR, OPEN IMPELLER	3180	4X6-12
D04582A02-1203	CASING, 150#FF FLANGES	3196	6X8-17
D04582A02-1216	CASING, 150#FF FLANGES	3196	6X8-17
D04582A02-1233	CASING 150#FF, FLANGES	3196 X17	6X8-17
D04584A01-6219	LABYRINTH SEAL, (O.B.)	3196
D04584A02-6219	LABYRINTH SEAL	3196	STANDARD
D04584A03-6219	LABYRINTH SEAL, THRUST	3196	1.5X3-13
D04584A04-6219	LABYRINTH SEAL, RADIAL (I.B.)	3196
D04584A05-6219	LAB’Y SEAL-THRUST BRG, W/ O-RINGS	3196X	COMMON
D04584A06-6219	LAB’Y SEAL – RADIAL BRG, W/ O-RINGS	3196X	COMMON
D04584A07-6219	LAB SEAL	3196
D04584A08-6219	LAB SEAL	3196
D04584A09-6219	SEAL, LABRINTH, ASSY, THRUST	3180 S/M	COMMON
D04584A10-6219	SEAL, LABRINTH, ASSY, RADIAL	3180	COMMON
D04584A11-6219	LAB’Y SEAL	3180 M
D04584A12-6219.	LAB’Y SEAL, INBND W/ORINGS	3180 L	COMMON
D04584A12-6219-O	LAB’Y SEAL, OUTBOARD W/ORINGS	3180 L	COMMON
D04584A13-6219	LAB’Y SEAL	3180 XL
D04584A14-6219	LAB SEAL-INBD	3410	COMMON
D04584A15-6219	LABY SEAL, INBD (STD)	3410	COMMON
D04584A16-6219	LAB SEAL-CPLG, END	3410	COMMON
D04584A17-6219	LABY SEAL, CPLG END (STD)	3410	COMMON
D04584A18-6219	LABYRINTH SEAL, ASSY, THRUST	3175
D04584A19-6219	LABYRINTH SEAL, ASSY, THRUST	3175
D04584A20-6219	LABYRINTH SEAL,, INBOARD	3175	COMMON
D04584A21-6219	LABYRINTH SEAL,, COUPLING	3175	COMMON
D04584A22-6219	LABYRINTH SEAL	3175
D04584A23-6219	LABYRINTH SEAL	3175
D04590A01-1003	CASING W/O TAP, OPEN IMP	3180	6X8-14
D04590A02-1203	CASING W/O TAP, OPEN IMP	3180	6X8-14
D04592A01-1003	CASING W/O TAPS FOR, OPEN IMPELLER	3180	12X14-22
D04592A02-1203	CASING W/O TAPS, FOR OPEN IMPELLER	3180	12X14-22
D04593A01-1003	CASING FOR OPEN IMPELLER	3180	4X6-14
D04593A02-1203	CASING, FOR, OPEN IMPELLER	3180	4X6-14
D04593A02-1216	CASING,NO TAPS, FOR OPEN IMP.	3180	4X6-14
D04599A02-1203	CASING FOR OPEN IMPELLER	3180	8X8-14
D04601A01-1003	CASING,NO TAPS, FOR OPEN IMP.	3180	6×10-22
D04601A02-1203	CASING,NO TAPS, FOR OPEN IMP.	3180 L	6×10-22
D04606A14-3201	GUARD HALF, FITS (T)FRM SIZE, 364,365,404,444,445	3196
D04607A01-1003	CASING W/O TAPS, OPEN IMPELLER	3180	3X6-12
D04607A02-1203	CASING W/O TAPS, OPEN IMPELLER	3180	3X6-12
D04621A02-1203	CASING, W/O TAPS, FOR OPEN IMPELLER	3180	8X10-19
D04621A02-1216	CASING, FOR OPEN IMP.	3180	8X10-19
D04622A01-1003	CASING FOR OPEN IMPELLER	3180	6X10-19
D04622A02-1203	CASING FOR OPEN IMPELLER	3180	6X10-19
D04626A02-1203	CASING,NO TAPS, FOR OPEN IMP.	3180	10X12-19
D04626A02-1216	CASING W/O TAPS, FOR OPEN IMPELLER	3180	10X12-19
D04627A01-1003	CASING W/O TAP, OPEN IMPELLER	3180	3X6-14
D04627A02-1203	CASING W/O TAP, FOR OPEN IMP. ONLY	3180	3X6-14
D04628A-1000	BEARING HSG, THRUST (OIL)	3196	COMMON
D04631A02-1203	CASING, NO TAPS	3180	10X12-22
D04631A02-1216	CASING, NO TAPS	3180	10X12-22
D04717A01-1003	CASING W/JIS FLG, W/O TAPS, OPEN IMPELLER	3185	6X10-16
D04719A01-1003	CASING, W/O TAPS, ISO FLG	3185	6X10-16
D04719A02-1203	CASING-N/TAPS, OPEN IMPELLER	3185	6X10-16
D04806A01-1003	CASING, FOR, OPEN IMP	3180	4X6-16
D04806A02-1203	CASING, FOR, OPEN IMP	3180	4X6-16
D04806A02-1216	CASING, FOR, OPEN IMP	3180 S	4X6-16
D04816A01-1003	CASING	3180	8X10-16
D04816A02-1203	CASING W/O TAPS, FOR OPEN IMPELLER	3180	8X10-16
D04816A02-1216	CASING W/O TAPS, FOR OPEN IMPELLER	3180	8X10-16
D04816A04-1203	CASING, WITH, TAPS	3180 L	8X10-16
D04821A-1000	FRAME	3180
D04824A-1000	BEARING FRAME	3180 L	COMMON
D04824A-1203	BEARING FRAME	3180 L	COMMON
D04847A-1000	BEARING, HOUSING	3180 XL	COMMON
D04871A-1001	BEARING, HOUSING	3196 XLTX	COMMON
D04872A-1000	BEARING HOUSING-OIL,, THRUST	3196	COMMON
D04928A-1012	CASING	3196	4X6-13
D04930A-1203	CASING	3196	4X6-13
D04930A-1204	CASING	3196	4X6-13
D04930A-1216	CASING	3196	4X6-13
D04932A-1220	CASING	3196	4X6-13
D05544A-1203	CASING, FOOT MOUNTED	3196LF	1.5X3-13
D05590A-1000	BEARING HOUSING (DUPLEX BRG), OIL	3196
D06543A-1013	C-FACE ADAPTER BP# 1, (MAX. MTR FRAME 145TC)	3196
D06548A-1013	C-FACE ADAPTER BP#3, (MAX. MTR FRAME 286 TSC)	3196
D06610A01-2238	SHAFT	3700	COMMON
D06628A-1203	CASING, 150# R.F. FOOT MOUNTED	3196LF	1X1.5-8
D06630A-1220	CASING	3196	2X3-8
D06638A-1203	CASING,150# R.F. FLNGS, FOOT MOUNTED	3196LF	1X2-10
D06647A-1203	CASING, 105# R.F., FOOT MOUNTED	3196 LF	1X1.5-4
D06900A-1041	IMPELLER, WITH, TELFLON O RING	3196CV	3X3-10
D06901A-1041	CASING,NO TAP, FOOT MOUNTED	3196 CV	3X3-10
D06933A-1041	CASING, NO TAPS, 150FF FOOT MNTED	3196CV	3X4-13
D06933A-1203	CASING, FOOT MNTED NO TAPS	3196CV	3X4-13
D07576A-2255	SHAFT	3620	8X10-13
D07577A-2238	SHAFT	3620
D07616A02-2246	IMPELLER WEAR RING	3620	4X6-10.5
D07616A08-1001	IMPELLER WEAR RING	3620	8X10-10.5
D07616A33-1001	IMPELLER WEAR RING	3620	12X14-19S
D07616A42-2246	IMPELLER WEAR RING	3620	6X8-10.5
D07617A02-2245	CASE WEAR RING	3620	4X6-10.5
D07617A05-2245	CASE WEAR RING	3620	6X8-10.5
D07617A08-1001	CASE WEAR RING	3620	8X10-10.5
D07617A33-1001	CASE WEAR RING	3620	12X14-19S
D07684A-6949	CONTAINMENT SHELL	3298
D0817A12-6242	LABYRINTH SEAL, INB AND OUTBRD	3180
D08643A-1203	STUFF BOX COVER,, TAPER BORE	3175	14″
D08709A02-1203	CASING	3196	4×6-17
D08709A02-1209	CASING	3196	4×6-17
D08709A02-1605	CASING	3196	COMMON
D08717A01-6241	LABYRINTH SEAL, (O.B.)	3196
D08717A02-6241	LABYRINTH SEAL, (I.B.)	3196
D08717A05-6219	THRUST BRG LAB, SEAL W/O’RINGS	3196 LTX
D08717A05-6241	LABYRINTH SEAL	3196
D08717A06-6219	RADIAL BRG LAB, SEAL W/ORINGS	3196 LTX
D08717A06-6241	LABYRINTH SEAL	3196
D08717A07-6241	LABYRINTH SEAL, (OTBD)	3196
D08717A07-6242	LABYRINTH SEAL, (OTBD)	3196
D08717A08-6241	LABYRINTH SEAL, (INBD)	3196
D08717A08-6242	LABYRINTH SEAL, (INBD)	3196
D08717A09-6241	SEAL, LABRINTH, ASSY, THRUST	3180 S/M	COMMON
D08717A10-6241	SEAL, LABRINTH, ASSY, RADIAL	3180	COMMON
D08717A11-6241	LAB’Y SEAL	3180 M
D08717A12-6242	LABYRINTH SEAL	3180
D08717A14-6241	LABRINTH SEAL (INBRD)	3410
D08717A18-6242	LABYRINTH SEAL, ASSY, THRUST	3175
D08717A19-6242	LABYRINTH SEAL, ASSY, THRUST	3175
D08717A20-6242	LABYRINTH SEAL,, INBOARD	3175	COMMON
D08717A21-6242	LABYRINTH SEAL,, COUPLING	3175	COMMON
D09197A12-6219	LAB’Y SEAL, INBND W/ORINGS	3180	COMMON
D09197A13-6242	LABRINTH SEAL (INBD)	3180
D09197A22-6242	LABY SEAL, CPLG END	3175
D09197A23-6242	LABYRINTH SEAL	3175
D09197A24-6242	LABYRINTH SEAL	3175
D09321A-1216	IMPELLER 6V, (MD: 22.50″)	3175	14X14-22
D160070S00X050	POWER END-OIL LUBE	3196
D1600M0S00X050	POWER END, OIL LUBE, W/SLV CONST.	3196
D1600X0S00X050	POWER END, 4140 SHAFT,	3196
D1613X40NC-0000	REPELLER KIT,, CHECKMATIC	3196 XLT	13″
D1613X40NP-0000	REPELLER CONV., KIT, PACKED	3196 XLT	13″
D4571A02-1203	CASING,NO TAPS, FOR OPEN IMP.	3180	10X10-14
D4571A02-1233	CASING,NO TAPS, FOR OPEN IMP.	3180	10X10-14
D7518M003P 0042	REPELLER CONV., KIT, PACKED	3175 M	18″
D7518M00CP 0042	REPELLER CONV., KIT, PACKED	3175 M	18″
D75PEL0NP0G040	POWER END- OIL, DO NOT USE, SEE P75PEL…….	3175	COMMON
D75PEM0NP0G040	POWER END OIL, DO NOT USE, SEE P75PEM…	3175	COMMON
D75PES0NP0G040	POWER END OIL LUBE, do NOT USE SEE: P75PES……	3175	COMMON
E00002E000-1228	CASING (PAT #:62202), (HC600)	5500	12X14-38
E00021E000-1228	CASING, (HC600)	5500	6X8-26
E00032E000-1228	CASING, (HC600)	5500	4X6-21
E00044E000-1228	IMPELLER, (HC600)	5500	8X10-21
E00046E000-1228	CASING, (HC600)	5500	8X10-21
E00171AS1-9488	CASING W/WEAR, RING AND PLUG	3700	1.5X3-11S
E00188AS1-1132	CASING W/WEAR	3700	6X8-16A
E00678A02-1203	CASING WITH TAPS, FOR OPEN IMPELLER	3180	18X18-22
E052143LGL0022	ROT. ELM. L/IMP RINGS, GRS LUBE, LH ROTATION	3405	12X14-14
E056123BGL-0022	ROT. ELM. W/IMP RINGS, FLASH FOR WW, GRS LUBE	3405	6X8-12
E058G73LGL0022	ROT. ELM. L/IMP RINGS, GRS LUBE,RH ROTATION	3405	8X10-17G
E102153WGL0042	ROT. ELEM. – COMP, W/RINGS LESS FLASHING	3410	12X14-15
E10814BLGL-0041	ROTATING ELEM. – COMPLETE, IMPELLER L/ RINGS	3410	8X10-14
E10H123LGL0042	ROT.ELE.W/COMP, IMP W/O RINGS	3410	10X12-12HXL
E10H123WGL0042	ROT.ELE.W/COMP, IMP W/RINGS	3410	10X12-12HXL
E3311H3LOL 0022	ROTATING ASSEMBLY, OIL LUBE, L/IMP RINGS	3316	3X4-11H
E3311H3WOL 0022	ROTATING ASSEMBLY, OIL LUBE, W/IMP RINGS	3316	3X4-11H
E3311HBLOL 0012	ROT. ASS’Y (4340 SHAFT), OIL LUBE, L/IMP RINGS	3316	3X4-11H
E3311HBWOL 0012	ROT. ASS’Y (4340 SHAFT), OIL LUBE, W/IMP RINGS	3316	3X4-11H
E33159IWOL-0014	ROTATING ELEMENT ASSY W/, RINGS	3316	1.5X2-9
E33211HWOL 0022	ROTATING ASSEMBLY, OIL LUBE, W/IMP RINGS	3316	2×3-11
E334113WOL0022	ROTATING ELEMENT-, W/RINGS	3316	4X6-11
E33411BWOL0012	ROTATING ELEMENT, W/RINGS	3316	4X6-11
E33411IWOL-0014	ROTATING ELEMENT ASSY W/, RINGS	3316	4X6-11
F1616SSLNPX102	LIQUID END, STD BORE	3196
F1633MDLBSX102	LIQUID END KIT, BIG BORE	3196	3X4-13
F1633MSLNPX102	LIQUID END, STANDARD BORE	3196	3X4-13
F1643MSLNPX102	LIQUID END KIT (STD BORE)	3196	4X6-13
F1665XSLNPX102	LIQUID END KIT (STD BORE)	3196	6X8-15
F1687XDLBSX102	LIQUID END-BIG BORE	3196	8X10-17
F1687XDLNPX102	LIQUID END	3196	8X10-17
F7536140SPN142	LIQUID END-STANDARD BORE, 2/4 VANE	3175	3X6-14
F7546180SPN542	LIQUID END-STANDARD BORE, 5 VANE	3175	4X6-18
F7568180SPN542	LIQUID END-STANDARD BORE	3175	6X8-18
F75H4180SPN642	LIQUID END, STANDARD BORE, (6V)	3175	14X14-18H
F7640SDLNPX102	LIQUID END, STND BORE	3796	4X4-10
FL610M3LTSX102	LIQUID END KIT	3196LF	1X2-10
FSP-14599, 8P1C1	SEAL TYPE 2, JOHN CRANE	3333	CB10-18
H002034	SHAFT	3310	2X2.5-7A
H005360	O’RING	3310H
H006300	O’RING	3310H	2.5X3-7A
H053642	IMPELLER	3310H	2.5X3-7A
H250350-2229	SLEEVE,, DISCHARGE	3310H	2.5X3-7A
H282635-2229	SLEEVE,SHAFT	3310H	2.5X3-7A
H282636-2229	SLEEVE,, COUPLING	3310H	2.5X3-7A
H292984-2229	SLEEVE COUPLING	3310	2X2.5-7A
H292985-2229	SHAFT SLEEVE	3310	2X2.5-7A
H53638	IMPELLER	3310H	2.5X3-7A
IE-114-2265	COUPLING	VIC	8X4 JLO
IE116	COUPLING SHAFT	VIT-FF	6X13
IE-116-2265	COUPLING	2IT-FF
IE-253-1104	BUSHING, SUC.	VIC	8X4 JLO
IE-254-1104	BUSHING,BOWL	VIC	8X4 JLO
IE-330-2242	COLLET	VIC	8X4 JLO
IE-447-1018	IMPELLER, TAPER LOCK	VERTICAL
JOHN CRANE 8-1T	MECH. SEAL, CARBON VS. CERAMIC	3196
L29852600CV000	LIQUID END KIT, NONMETALLIC MAG. DRIVE	3298	2X3-6
LV628S5LTSX102	LIQUID END TAPERBORE +	CV 3196	2X2-8
LV630M4LNSX103	LIQUID END KIT-STANDARD, BORE S.B. CVR	CV 3196	3X3-10
LV633M4LTSX103	LIQUID END KIT-TAPERBORE+	CV 3196	3X4-13
MOTOR	3/60/440, 100HP, 1800 RPM
MRC-5313CG	OUTBOARD BALL, BEARING
P160070S00-X050	POWER END ASSY, OIL LUBE, W/ SLEEVE	3196
P1600L0S00X050	POWER END ASSY, W/SLEEVE CONST.	3196
P1600L0S00X080	POWER END ASSY, L/SLEEVE CONST.	3196
P1600LO00-0070	POWER END	3196	3X4X13
P1600M0000-0050	POWER END, (OIL LUBE)	3196
P1600M00S00-X080	POWER END ASSEM., (OIL LUBE) L/SLEEVE	3196
P1600M0R00X080	POWER END ASSM, GRS FOR LIFE	3196 MTX	SOILD SHAFT
P1600M0S00X050	POWER END ASSM, W/SLEEVE CONST.	3196
P1600M0S00-X050	POWER END ASSY, OIL LUBE	3196
P1600M0S00-X060	POWER END ASSEM. (OIL LUBE), W/SLEEVE CONST.	3196
P1600M0S00-X080	POWER END ASSY, OIL LUBE, L/SLEEVE	3196
P1600S0D00X060	POWER END ASSY, W/SLV DUPX.BRG	3196
P1600S0S00-X050	POWER END ASSY, OIL LUBE, W/SLEEVE	3196	OIL LUBE
P1600S0S00X060	POWER END ASSY, W/SLV CONST	3196	OIL LUBE
P1600S0S00-X080	POWER END ASSY, OIL LUBE, L/ SLEEVE	3196
P1600X0S00-X050	POWER END ASSY, (OIL LUBE), W/SLEEVE	3196
P1600X0S00-X080	POWER END ASSY, OIL LUBE, L/ SLEEVE	3196
P75PEL0NP0-G040	POWER END-OIL LUBE	3175	COMMON
P75PEL0WP0G040	POWER END – 316SS SHAFT, OIL LUBE	3175
P75PEM0-316SS	POWER END – W/ 316SS SHAFT, 317SS SLEEVE	3175
P75PEM0NP0-G040	POWER END, OIL LUBE	3175	COMMON
P75PES0NP0-G040	POWER END (OIL LUBE)	3175
P75PESONPO-R040	COMP POWER END, GREASE LUBE	3175
P80PEL0NP0 R010	POWER END	3180
P80PEL0NP0R010	POWER END-, GREASE	3180	COMMON
P80PEM0NP0R010	POWER END-, GREASE	3180	COMMON
P80PES0NP0 R010	POWER END-, GREASE	3180	COMMON
P80PEX0NP0R010	POWER END	3180	COMMON
P85PEL0NP0R010	POWER END-, GREASE	3185	COMMON
P85PEM0NP0R010	POWER END	3185	COMMON
P85PES0NP04010	POWER END	3185	COMMON
R100-111-1012	STUFFING BOX COVER	3196	8″
R100-155-1203	IMPELLER	3196	2X3-6
R100-155-1204	IMPELLER	3196	2X3-6
R100-155-1216	IMPELLER	3196	2X3-6
R100-159-1203	IMPELLER	3196	1.5X3-8
R100-159-1204	IMPELLER	3196	1.5X3-8
R100-159-1216	IMPELLER	3196	1.5X3-8
R100-161-1203	IMPELLER W/O’RING 5 VANE, (MD: 8.375″)	3196	2X3-8
R100-161-1204	IMPELLER (MD: 8.375″)	3196	2X3-8
R100-161-1215	IMPELLER	3196	2X3-8
R100-161-1216	IMPELLER	3196	2×3-8
R100-163-1203	IMPELLER (M.D. 8.375″)	3196	3X4-8
R100-163-1204	IMPELLER	3196	3X4-8
R100-163-1216	IMPELLER	3196	3X4-8
R100-163-1247	IMPELLER	3196	3X4-8
R100-164-1013	IMPELLER	3196	3X4-8
R100-165-1203	IMPELLER, (M.D. 8 3/8″)	3196	3X4-8G
R100-165-1204	IMPELLER 5V (MD: 8.375″)	3196	3X4-8G
R100-165-1216	IMPELLER, (M.D. 8 3/8″)	3196	3X4-8G
R100-165-1601	IMPELLER, (M.D. 8.375″)	3196	3X4-8G
R100-166-1013	IMPELLER, W/RING	3196	3X4-8G
R100-204-1001	CAP, BEARING	3405 & 3316
R100-205-1001	BEARING CAP	3405	COMMON
R100-206-1001	BEARING CAP	3316 S	2X3-9
R100-304-1220	IMPELLER, DIA=9-5/8″	3196	3X4-10
R100-529-1203	STUFFING BOX, COVER	3196/3796T	13″
R100-529-1204	STUFFING BOX, COVER	3196 MT	13″
R100-529-1216	STUFFING BOX, COVER	3196	13″
R100-530-1012	STUFFING BOX, COVER	3196	13″
R100-533-1203	STUFFING BOX, COVER-STANDARD PACKING	3196	13″
R100-533-1204	S.B. COVER	3196	13″
R100-533-1216	STUFFING BOX COVER	3196	13″
R100-534-1203	STUFFING BOX, COVER	3196	3X4-13
R100-535-1203	STUFFING BOX COVER,, JACKETED	3196	13″
R100-537-1203	IMPELLER W/O’RING 5 VANE, (MD: 13.00″)	3196	1.5X3-13
R100-537-1203(RC)	IMPELLER, CASTING ONLY	3196MT*	1.5X3-13
R100-537-1204	IMPELLER	3196	1.5X3-13
R100-537-1215	IMPELLER	3196	1.5X3-13
R100-537-1216	IMPELLER	3196	1.5X3-13
R100-538-1013	IMPELLER	3196	1.5X3-13
R100-539-1013	IMPELLER W/TEFLON O-RING, 5 VANE	3196	2X3-13
R100-539-1203	IMPELLER (MD: 13.00″), 5 VANE W/BALANCE HOLES	3196	2X3-13
R100-539-1204	IMPELLER	3196	2X3-13
R100-539-1216	IMPELLER	3196	2X3-13
R100-553-1215	S.B. COVER	3196 LTC	2 X 3 – 13
R100-556-1203	IMPELLER 5 VANE, (MD: 13.00″)	3196	3X4-13
R100-556-1204	IMPELLER, 5 VANES	3196	3X4-13
R100-556-1216	IMPELLER (5 VANE)	3196	3X4-13
R100-585-1203	STUFFING BOX COVER	3196/CV	10″
R100-585-1204	STUFF BOX COVR	3196 MT	10″
R100-585-1215	STUFFING BOX COVER	3196/CV	10″
R100-585-1216	STUFFING BOX COVER	3196	10″
R100-585-1217	STUFF BOX COVR	3196	10″
R100-586-1012	STUFFING BOX COVER	3196	10″
R100-587-1203	ST.BOX COVER, STD BORE, WATER JACKETED	3196	10″
R100-588-1012	STUFFING BOX COVER, WATER JACKETED	3196	10″
R100-589-1203	STUFFING BOX, COVER	3196 LTC	10″
R100-589-1215	STUFFING BOX, COVER	3196 LTC	10″
R100-590-1012	STUFFING BOX, COVER	3196 LTC	10″
R100-593-1203	IMPELLER W/O’RING 5 VANE, (MD: 10.00″)	3196	1.5X3-10
R100-593-1204	IMPELLER	3196	1.5X3-10
R100-593-1216	IMPELLER	3196	1.5X3-10
R100-594-1013	IMPELLER	3196	1.5X3-10
R100-595-1203	IMPELLER (MD: 10.00″), 5 VANE	3196	2X3-10
R100-595-1204	IMPELLER	3196	2X3-10
R100-595-1215	IMPELLER	3196	2X3-10
R100-595-1216	IMPELLER, (M.D. 10.00″)	3196	2X3-10
R100-596-1013	IMPELLER W/O’RING 5 VANE, (MD: 10.00″)	3196	2X3-10
R100-597-1203	IMPELLER (M.D. 10″)	3196	3X4-10
R100-597-1204	IMPELLER	3196	3X4-10
R100-597-1216	IMPELLER	3196	3X4-10
R100-598-1013	IMPELLER	3196	3X4-10
R100-786-1203	STUFFING BOX, COVER	3196 MT	6″
R100-788-1203	STUFFING BOX COVER	3196	8″
R100-788-1204	STUFFING BOX, COVER	3196 MT	8″
R100-788-1215	STUFFING BOX, COVER	3196 MT	8″
R100-788-1216	STUFFING BOX, COVER	3196 MT	8″
R100-794-2229	SHAFT	3138	COMMON
R100-841-1000	SUCTION COVER, W/PLUG&WR.RING	3655 M	4X6-11H
R100-841-9248	SUCTION COVER, W/PLUG&WR.RING	3655 M	4X6-11H
R101-157-2229	SHAFT	3196 M	COMMON
R101-157-2238	SHAFT	3196	COMMON
R101-264-1618	SHAFT SLEEVE	3420
R101-499-1013	IMPELLER W/O’RING (6VANE), (MD: 13.00″)	3196	4X6-13
R101-500-1203	IMPELLER W/O’RING, (6V), (M.D: 13.00″)	3196	4X6-13
R101-500-1204	IMPELLER	3196	4X6-13
R101-500-1216	IMPELLER 6 VANE, (MD: 13.00″)	3196	4X6-13
R101-500-1217	IMPELLER W/ O’RING, 6 VANE, (MD: 13.00″)	3196	4X6-13
R101-527-1013	IMPELLER	3196	4X6-10
R101-528-1203	IMPELLER	3196	4X6-10
R101-528-1204	IMPELLER	3196	4X6-10
R101-528-1216	IMPELLER (MD: 10.00″)	3196	4X6-10
R101-574-1-2229	SHAFT, ASSEMBLY	3420 S	16X18-30
R101-574-1-2249	SHAFT, ASSEMBLY	3420	20X24-30
R101-574-2238	SHAFT, ASSEMBLY	3420	20X24-30
R101-595-1203	IMPELLER	3196	2X3-10
R101-605-2229	SHAFT	3736	COMMON
R101-605-2238	SHAFT	3736	1.5X4-13
R101-660-1220	S.B. COVER NON JACKETED, STD BORE	3196	10″
R10176-1203	IMPELLER	3196	2×3-6
R10176-1203 (RC)	IMPELLER, (CASTING ONLY)	3196	2×3-6
R101-838-2229	SHAFT ASSEMBLY, (OIL LUBE)	3405/3316
R101-838-2249	SHAFT ASSEMBLY	3316	COMMON
R101-878-1220	STUFFING BOX, COVER	3196	4X6-13
R101-879-1220	IMPELLER, DIA=12″	3196	4X6-13
R102-426-1220	IMPELLER	3196	2X3-13
R102-429-1203	SLEEVE	3420	COMMUN
R102-812-1013	FRAME ADAPTER	3196	13″
R102-814-1013	FRAME ADAPTER	3196	15″
R102-871-2229	SHAFT	3175 S	COMMON
R102-871-2238	SHAFT	3175	COMMON
R102-872-2229	SHAFT	3175	COMMON
R102-872-2238	SHAFT	3175	COMMON
R102-873-2229	SHAFT	3175 L	COMMON
R102-873-2238	SHAFT	3175	COMMON
R103-304-1220	IMPELLER	3196	3X4-10
R103-608-1013	IMPELLER	3196	6X8-13
R103-609-1203	IMPELLER, 6 VANE, (M.D. 13.00″)	3196	6X8-13
R103-609-1216	IMPELLER 6 VANE, (MD: 13.00″)	3196	6X8-13
R103-612-1203	IMPELLER-6VANE (M.D. 13¼”), (OLD STYLE)	3196	8X10-13
R103-612-1216	IMPELLER, 6 VANE (OLD STYLE), (MD: 13.25″)	3196	8X10-13
R103-614-2229	SHAFT (SLEEVE REQUIRED)	3196	COMMON
R103-614-2238	SHAFT, (FOR SLEEVE)	3196	COMMON
R103-614-2248	SHAFT,, SLV REQUIRED	3196 XLT	COMMON
R103-615-2156	SHAFT, (NO SLEEVE)	3196 XLT	COMMON
R103-615-2229	SHAFT, (NO SLEEVE)	3196	COMMON
R103-615-2237	SHAFT, (NO SLEEVE)	3196	COMMON
R104-14611-1203	IMPELLER (MD: 13.00″)	3196	4X6-13
R104-14611-1204	IMPELLER	3196	4X6-13
R104-14611-1215	IMPELLER (MD: 13.00″)	3196	4X6-13
R104-14611-1216	IMPELLER	3196	4X6-13
R104-14612-1220	IMPELLER	3196	4X6-13
R104-14616-1203	IMPELLER	3196	2X3-10
R104-14616-1204	IMPELLER	3196	2X3-10
R104-14618-1203	IMPELLER	3196	4X6-10
R104-14619-1013	IMPELLER W/O’RING 5 VANE, (MD: 10.00″)	3196	1X2-10
R104-14619-1216	IMPELLER W/O’RING 5 VANE, (MD: 10.00″)	3196	1X2-10
R104-14620-1203	IMPELLER W/O’RING 5 VANE, (MD: 10.00″)	3196	1X2-10
R104-14622-1203	IMPELLER W/O’RING 5 VANE, (MD: 10.00″)	3196	1.5X3-10
R104-14625-1203	IMPELLER W/O’RING, (MD: 10.00″)	3196	3X4-10
R104-14625-1216	IMPELLER	3196	3X4-10
R104-146-9-1220	IMPELLER, 6 VANES	3196	3×4-13
R104-146A2-1203	IMPELLER 5 VANE, (MD: 13.00″)	3196	1.5X3-13
R104-16-1220	STUFFING BOX, COVER	3196 MT	4X6-13
R104-330-1-2229	SHAFT ASMBLY – RH, (R.O. SLV BRGS, BOTH ENDS)	3415	10X12-22
R104-330-2-2229	SHAFT ASMBLY-LH, (R.O. SLV BRGS, BOTH ENDS)	3415	10X12-22
R104-355-1-2229	SHAFT ASMBLY – RH, (R.O. SLV BRG, CPLG END)	3415	10X12-22
R104-355-2-2229	SHAFT ASMBLY – LH, (R.O. SLV BRGS, CPLG END)	3415	10X12-22
R104-369-1-2229	SHAFT, RH ROT., RING OILED SLEEVE BRG.-COUP END	3415
R104-429-1012	STUFFING BOX COVER	3196	6″
R104-431-1012	STUFFING BOX COVER	3196/3796	8″
R104-434-2156	SHAFT, LESS, SLEEVE CONST.	3196 ST
R104-434-2229	SHAFT,, (NO SLEEVE)	3196	COMMON
R104-434-2230	SHAFT,, (NO SLEEVE)	3196 ST	COMMON
R104-435-2156	SHAFT (W/PIN), W/SLEEVE CONST	3196 ST	COMMON
R104-435-2229	SHAFT, (FOR SLEEVE)	3196	COMMON
R104-435-2230	SHAFT, (FOR SLEEVE)	3196 ST	COMMON
R104-435-2238	SHAFT, (FOR SLEEVE)	3196
R104-445-1012	CASING	3196	1X2-10
R104-537-1216	IMPELLER W/TEFLON O-RING, 5 VANE	3196	1.5X3-13
R104-562-1203	STUFFING BOX COVER	3196	6″
R104-562-1204	STUFFING BOX, COVER	3196	6″
R104-562-1215	STUFFING BOX, COVER	3196 ST	6″
R104-562-1216	STUFFING BOX, COVER	3196 STX	1X1.5-6
R104-564-1203	STUFFING BOX COVER	3196	8″
R104-564-1204	STUFFING BOX, COVER	3196	8″
R104-564-1216	STUFFING BOX, COVER	3196 ST	8″
R104-576-2237	SHAFT	3196 ST	COMMON
R104-65-1220	STUFFING BOX, COVER	3196 MT	13″
R104-706-1012	STUFFING BOX, COVER	3196 XLT	13″
R104-707-1203	STUFFING BOX COVER	3196	13″
R104-707-1216	STUFFING BOX, COVER	3196	13″
R104-709-1012	STUFFING BOX COVER	3196	15″
R104-710-1203	STUFFING BOX COVER	3196	15″
R104-710-1204	COVER,, STUFFING BOX	3196 XLT	15″
R104-710-1216	COVER,, STUFFING BOX	3196 XLT	15″
R104-711-1220	COVER,, STUFFING BOX	3196 XLT	15″
R104-731-2229	SHAFT-SOLID, (NO SLEEVE)	3196	COMMON
R104-731-2230	SHAFT, (NO SLEEVE)	3196	COMMON
R104-732-2237	SHAFT, (NO SLEEVE)	3196	COMMON
R104-733-2150	SHAFT (SLEEVE, REQUIRED)	3196/3198 MT	COMMON
R104-733-2229	SHAFT, (SLEEVE REQUIRED)	3196
R104-733-2230	SHAFT (SLEEVE, REQUIRED)	3196/3198	COMMON
R104-733-2238	SHAFT, (FOR SLEEVE)	3196	COMMON
R104-733-2238-NS	SHAFT (FOR SLEEVE), 1 5/8″ COUPLING END	3196	COMMON
R110-62-2229	SHAFT, (NO SLEEVE)	3196 LTC	COMMON
R110-64-2229	SHAFT (SLEEVE, REQUIRED)	3196 LTC	COMMON
R110-64-2238	SHAFT (SLEEVE, REQUIRED)	3196	COMMON
R110-64-2328	SHAFT (SLEEVE, REQUIRED)	3196 LTC
R113-46-1220	IMPELLER, DIA=7″	3196	1X1.5X8
R116-59-1220	STUFFING BOX, COVER	3196	8″
R116-60-1220	IMPELLER	3196	3X4-8
R116-60-1220	IMPELLER	3196	3X4-8
R116-8819-1012	IRON STUFFING BOX COVER, NON-COOLED	3996 ST	2×3-6
R175-MKL18	MAINTENANCE KIT	3175	18″
R175-MKL22	MAINTENANCE KIT	3175	10X12-22
R175-MKS14	MAINTENANCE, KIT	3175	3X6-14
R180MKS	MAINTENANCE, KIT	3180 S	4X6-16
R196LXPRKO	PUMP REPAIR KIT, (OIL LUBE)	3196	3X4-13
R196MKL10	MAINTENANCE KIT	3196	10″
R196MKL13	MAINTENANCE KIT	3196	13″
R196MKM10	MAINTENANCE KIT	3196	10″
R196-MKM10	MAINTENANCE KIT, MTX-10″	3196	10″
R196MKM13	MAINTENANCE KIT	3196	13″
R196-MKM13	MAINTENANCE KIT	3196	13″
R196MKM6	MAINTENANCE KITS	3196	6″
R196MKM8	MAINTENANCE KIT 8″	3196	8″
R196-MKM8	MAINTENANCE KIT	3196	8″
R196MKS6	MAINTENANCE, KIT	3196	6″
R196-MKS6	MAINTENANCE KIT	3196	6″
R196MKS8	MAINTENANCE KIT	3196	8″
R196-MKS8	MAINTENANCE KIT	3196	8″
R196-MKX13	MAINT. KIT	3196	6X8-13
R196MKX15	MAINTENANCE KIT	3196	15″
R196-MKX17	MAINTENANCE KIT	3196
R196MTPRKO	PUMP REPAIR, KIT-OIL LUBE	3196
R196STPRKO	PUMP REPAIR, KIT-OIL LUBE	3196
R196XLPRKO	PUMP REPAIR, KIT-OIL LUBE	3196	13″
R235-101-1130	CASING W/RING	3655	6X6-9
R235-125-1000	CASING W/PLUGS & W.RING	3655	2X3-7
R235-125-1130	CASING W/PLUG, & WEAR RING	3655	2X3-7
R235-19-1203	CASING W/PLUGS, & WEAR	3655 M	2 1/2X3-9
R235-23-9248	CASING	3755 M	1.5X2-9
R235-31-1203	CASING W/PLUGS, & WEAR RING	3655	2X2.5-9
R235-51-1000	CASING	3655	2X2-7
R235-51-1101	CASING	3655	2X2-7
R235-51-1130	CASING	3655	2X2-7
R237-124-1203	CASING W/PLUGS, & WEAR RING	3655	2.5X3-13
R237-45-1000	CASING	3189	3X4-13
R237-45-1203	CASING	3189	3X4-13
R238-1-9248	CASING W/PLUGS, & WEAR RING	3655	4X6-13
R238-21-2229	SHAFT(SNG.EXT) – GREASE LUBE, W/ SNAP RING	3405	COMMON
R238-21-2249	SHAFT(SNG.EXT)-GREASE LUBE, W/SNAP RING	3405 M	COMMON
R238-33-2150	SHAFT, SGL EXT., GREASE LUBE	3404
R238-33-2229	SHAFT ASSEMBLY, GREASE SGL EXT	3405	COMMON
R238-33-2249	SHAFT ASSEMBLY, GREASE SGL EXT	3405	COMMON
R238-33-2255	SHAFT ASSEMBLY, GREASE SGL EXT	3405	COMMON
R248-98-1203	CASING	3199T	1.5X3-6T
R249-82-1000	BRG. FRAME, (USES FRM ADAPTER)	3735B	1X2-11B
R249-93-1000	FRAME ADAPTER	3735B	1X2-11B
R249-95-1-2229	SHAFT ASSEMBLY	3735
R249-95-1-2238	SHAFT ASSEMBLY	3735 M
R251-104-1-2229	SHAFT ASS’Y, RH ROTATION, RING OILED BALL BRGS.	3415
R251-104-1-2249	SHAFT	3415 S	COM
R251-120-2229	SHAFT – OIL LUBE, W/BRG LOCKNUT	3316/3405	COMMON
R251-120-2249	SHAFT – OIL LUBE, W/ BRG LOCKNUT	3316/3405	COMMON
R251-121-2229	SHAFT	3316	6X8-17
R251-121-2249	SHAFT ASSEMBLY, OIL (SIN.EXT)	3316
R252-107-1-2229	SHAFT-RH ROT., (BALL BEARING)	3415	COMMON
R252-107-1-2249	SHAFT-RH ROT., RING-OIL BALL	3415 M	COMMON
R252-107-2-2229	SHAFT-LH ROT., BALL BEARING	3415 M	COMMON
R253-19-1203	CASING W/PLUGS, & WEAR	3655 M	2 1/2X3-9
R254-18S-1203	STUFFING BOX, COVER	3175	4X6-18S
R254-63-1003	STUFFING BOX COVER	3175 S	14″
R254-64-1203	STUFFING BOX, COVER	3175	14″
R254-64-1216	STUFFING BOX, COVER	3175 S	14″
R254-65-1000	STUFFING BOX, COVER	3175 S	18″
R254-66-1203	STUFFING BOX, COVER	3175	18″
R254-66-1216	STUFFING BOX, COVER	3175	4X6-18
R254-67-1003	STUFFING BOX, COVER	3175	14″
R254-68-1203	STUFFING BOX, COVER	3175 M	14″
R254-68-1216	STUFFING BOX, COVER	3175 M	14″
R254-69-1000	STUFFING BOX, COVER	3175	18″
R254-70-1203	STUFFING BOX, COVER	3175	18″
R254-70-1204	STUFFING BOX, COVER	3175 M	18″
R254-70-1209	STUFFING BOX COVER	3175	18″
R254-70-1216	STUFFING BOX COVER	3175	18″
R254-71-1000	STUFFING BOX, COVER	3175	22″
R254-71-1203	STUFFING BOX COVER	3175	22″
R254-72-1203	STUFFING BOX, COVER	3175	22″
R254-72-1216	STUFFING BOX COVER	3175	22″
R254-73-1003	STUFFING BOX, COVER	3175	18″
R254-74-1203	STUFFING BOX COVER	3175	18″
R254-74-1216	STUFFING BOX, COVER	3175 L	18″
R254-75-1000	STUFFING BOX, COVER	3175	22 “
R254-76-1203	STUFFING BOX COVER	3175	22″
R254-76-1212	STUFFING BOX, COVER	3175 L	22″
R254-76-1216	STUFFING BOX COVER	3175	22″
R255-21-1003	CASING	3175	3X6-14
R255-25-1003	CASING	3175 S	4X6-18
R255-27-1003	CASING	3175 S	6X8/12-14
R255-29-1003	CASING, PEE 75M1650-040	3175	6X8-18
R255-33-1003	CASING	3175 M	8X10/14-14
R255-35-1003	CASING	3175 M	8X10-18
R255-39-1003	CASING	3175	8X10-18H
R255-41-1003	CASING	3175 M	10X12/16-18
R255-45-1003	CASING	3175 L	12X14-22
R255-47-1003	CASING	3175 L	14X14-22
R255-49-1003	CASING	3175 L	12X14-18
R255-51-1003	CASING	3175	14X14-18H
R256-109-1203	IMPELLER	3196	8X10-15
R256-116-1203	IMPELLER, (MD: 15.00″)	3196	6X8-15
R256-116-1216	IMPELLER (MD: 15.00″)	3196	6X8-15
R256-117-1220	IMPELLER, (MD: 15.00″)	3196	6X8-15
R256-118-1012	IMPELLER	3196	8X10-15
R256-119-1203	IMPELLER, 6V, (M.D. 15.00″)	3196	8X10-15
R256-119-1204	IMPELLER, W/TEFLON O-RING	3196	8X10-15
R256-119-1215	IMPELLER	3196	8X10-15
R256-119-1216	IMPELLER, W/TEFLON O-RING	3196	8X10-15
R256-121-1013	IMPELLER	3196	8X10-15G
R256-122-1203	IMPELLER 6V (MD: 15.00″)	3196	8X10-15G
R256-122-1204	IMPELLER	3196	8X10-15G
R256-122-1215	IMPELLER	3196	8X10-15G
R256-122-1216	IMPELLER	3196	8X10-15G
R258-35-1000	FRAME	3735 M	COMMON
R258-36-1000	BRG. FRAME	3735	1X2-11B
R262-74-1003	CASING	3175 XL	20X24-28
R262-83-2238	SHAFT	3175 XL	COMMON
R267-73-1001	FRAME	3755	2X2-7
R270-261-1012	IRON CASING, 150#	3996 ST	2X3-6
R272-29-1220	STUFFING BOX	3196 ST	1X1.5X8
R296MKS68	MAINTANENCE KIT	3296	6″ & 8″
R64876-1001	DUST COVER	3450
R64881-1001	OIL THROWER	3450
R65353-61-4200	TUBING-VENT	3316 L	COMMON
R65353-704101	COPPER BRG COOLING COIL	3316	3X4-11H
R66181-1-1102	SHAFT SLEEVE, RH	3450
R66181-2-1102	SHAFT SLEEVE, LH	3450
R68270-1101	DEFLECTOR, W/SCREW & INSERT	3655	2.5X3-13
R70020-1104	SLEEVE,NONLOCK	3405	COMMON
R70021-1104	SLEEVE,LOCKING	3405 M	COMMON
R70047X-2222	SHAFT SLEEVE,, LOCKING	3405-3316 M	COMMON
R70047X-2229	SHAFT SLEEVE,, LOCK w/ O-RING	3405-3316	COMMON
R70047X-2248	SHAFT SLEEVE,, LOCK w/ O-RING	3405-3316	COMMON
R70047X-6956	SLEEVE,LOCKING	3405	COMMON
R70048-6956	SLEEVE,NONLOCK	3405	COMMON
R70048X-2229	SHAFT SLEEVE, NON-LOC w/O-RING	3405/3316	COMMON
R70048X-2248	SHAFT SLEEVE, NON-LOC w/O-RING	3405/3316	COMMON
R70049-6956	SLEEVE, NON, LOCKING	3316	S
R70049X-2222	SLEEVE	3316 S	1.5X2-9
R70049X-2229	SLEEVE, NON, LOCKING	3405/3316	COMMON
R70050-6956	SLEEVE,, LOCKING	3316	S
R70050X-2222	SHAFT SLEEVE,, W/O-RING	3405-3316 S	COMMON
R70050X-2229	SLEEVE,, LOCKING	3405	COMMON
R70087-1104	SHAFT SLEEVE,, W/ O-RING	3405	COMMON
R70088-1104	SHAFT SLEEVE,, LOCK W/O-RING	3405	COMMON
R70110-4-4200	TUBING,, EQUALIZING	3316 L	COMMON
R70551-1203	SHAFT SLEEVE,, NON-LOCK.	3405	COMMON
R70551-2222	SLEEVE,, W/”O”-RING	3405 L	COMMON
R70551-6963	SLEEVE,, W/”O”-RING	3405
R70551X-2222	SHAFT SLEEVE	3405 L	COMMON
R70551X-2229	SHAFT SLEEVE, LOCKING, W/O’RING	3316/3405	COMMON
R70552-2229	SHAFT SLEEVE,, LOCKING	3405	COMMON
R70552X-2222	SHAFT SLEEVE	3405 L
R70552X-2229	SHAFT SLEEVE, LOCKING, W/O’RING	3316/3405
R70777-2229	SLEEVE,LKNG W/O’RNG JC TPE 1, DBL SEAL INSD UNBAL MT SEAT	R3316
R70780-2229	SLEEVE,W/O’RNG JC TPE 1 DBL, SEAL, INSD UNBAL MTD SEAT	R3316
R70781-2229	SHAFT SLEEVE	3406/3316
R72211-2229	DEFLECTOR, (OLD STYLE)	3138 S
R72222-6956	SLEEVE, W/O-RING	3405-3316	COMMON
R72223-6956	SLEEVE, LOCKING, W/O-RING	3405-3316	COMMON
R72360-6737	SHAFT SLEEVE, NON-LOCw/ORING	3405-3316	COMMON
R72360-6956	SHAFT SLEEVE, NON-LOCw/ORING	3405-3316	COMMON
R72488-6956	SLEEVE, NONLOC, WITH O-RING	3405 L	COMMON
R72489-6956	SLEEVE, LOCK, WITH O-RING	3405	COMMON
R72930-2229	SCREW, IMPELLER, W/INSERT	3199
R74191-1-1203	SHAFT NUT, RIGHT HAND	3420	20X24-28
R74191-2-1203	SHAFT NUT, LEFT HAND	3420	20X24-28
R74206-2-1000	NUT, SHAFT (LH)	3420	20X24-30
R74206-2-1203	NUT, SHAFT (LF)	3420	20X24-30
R74492 1-2229	SCREW IMPELLER	3735
R74492-1-2226	IMPELLER SCREW	3735	1X2-11B
R74620-1001	DEFLECTOR	3138
R74769-1001	DUST COVER CPLG END, (RING OILED BALL BRGS)	3415
R74770-1001	OIL THROWER, (RING OILED BALL BEARINGS)	3415	COMMON
R74777-2-1101	SLEEVE NUT, LEFT HAND	3415	8X10-22
R75203-1000	OIL THROWER	3415
R75641-1-1203	SLEEVE NUT-RH	3415 S	COMMON
R75641-2-1203	SLEEVE NUT-LH	3415 S	COMMON
R75642-1-1203	SLEEVE NUT, RH	3415 M	COMMON
R75642-2-1203	SLEEVE NUT, LH	3415 M	COMMON
R75727-2229	SLEEVE, JC TYPE 1B W/O’RNG, SNGL INSDE BAL M. SEAL	3316	2X3-11
R75728-2229	SLEEVE,LKNG W/O’RNG JC 1B, SNGL INSDE BAL M SEAL	3316	2X3-11
R76028	SLEEVE,, TYPE 1+9T	3405 L	8X10-17G
R76028-2154	SLEEVE, TYPE 1+9T, JC SGL W/CLMP SEAT	3404
R76029	SLEEVE,LOCKING, TYPE 1+9T	3405 L	8X10-17G
R76029-2154	SHAFT SLEEVE	3404 L	8X10-17G
R76-240-1203	SUCTION COVER, W/ PLUG & WEAR RING	3655	2.5X3-13
R76-248-9248	SUCTION CVR W/, PLUG & RING	3655 M	4X6-13
R76288	LANTERN RING	3755	1.25X1.5-7
R76290	LANTERN RING	3316	3405 S
R76292	LANTERN RING	3655	2.5X3-13
R76293	LANTERN RING	3410 S	3196 MT
R76295	LANTERN RING	3410	3196 LTC
R76296	LANTERN RING	3196 MT	COMMON
R76297	LANTERN RING	3316/3405
R76298	LANTERN RING	3196	COMMON
R76298Z	LANTERN RING	3196 XLT	COMMON
R76349-1104	SLEEVE,(T 1&9), W/O-RING	3405	COMMON
R76350-1104	SLEEVE,(T 1&9), LOCK W/O-RING	3405 L	COMMON
R76497	LANTERN RING	3175	COMMON
R76497-D	LANTERN RING	3410 XL	COMMON
R76498	LANTERN RING	3175	COMMON
R76499	LANTERN RING	3175 L	COMMON
R76526-2229	SLEEVE,+O-RING, (SPECIAL)	3316 L	COMMON
R76527-2229	SLEEVE,LOCKING, (SPECIAL)	3316 L	COMMON
R76775	LANTERN RING	3196	COMMON
R76777-1013	IMPELLER	3196	1X1.5-6
R76778-1013	IMPELLER, W/RING	3196	1.5X3-6
R76779-1013	IMPELLER	3196	1×1.5-8
R76780-1013	IMPELLER, W/RING	3196	1.5X3-8
R76781	IMPELLER, (@ MAX DIA.)	3196	1X1.5-6
R76781-1203	IMPELLER, (M.D. 6.0625″)	3196	1X1.5-6
R76781-1204	IMPELLER	3196	1X1.5-6
R76781-1209	IMPELLER	3196	1X1.5-6
R76781-1215	IMPELLER, 5 VANE	3196	1X1.5-6
R76781-1216	IMPELLER	3196	1X1.5-6
R76792-1203	IMPELLER, 5 VANE, (MD: 6.0625″)	3196	1.5X3-6
R76792-1204	IMPELLER	3196	1.5X3-6
R76792-1216	IMPELLER	3196	1.5X3-6
R76793-1203	IMPELLER W/TEF O-RING, (MD: 8.00″)	3196	1×1.5-8
R76793-1204	IMPELLER	3196	1X1.5-8
R76793-1216	IMPELLER	3196	1X1.5-8
R76794-1203	IMPELLER, 5 VANE, (MD:8.00″)	3196	1.5×3-8
R76794-1203(RC)	IMPELLER, CASTING ONLY	3196-ST	1.5X3-8
R76794-1204	IMPELLER	3196	1.5×3-8
R76794-1216	IMPELLER	3196	1.5×3-8
R76797-1013	IMPELLER W/O’RING 5VANE, (MD: 10.00″)	3196	1X2-10
R76956-1-2229	SLEEVE NUT, RH, RING OILED SLEEVE BRG.-COUP END	3415
R76956-2-2229	SLEEVE NUT, LH, RING OILED SLEEVE BRG.-COUP END	3415
R77159-1204	GLAND KIT	3196
R77-55-2229	SHAFT, (GREASE LUBE)	3405/3316
R77-55-2249	SHAFT, SINGLE, EXTEN,GREASE	3405 S	COMMON
R78-217-2237	SHAFT	3189
R78229-2229	SHAFT	3715 M
R79-115-2210	SHAFT W/KEY, RETNGN RING	3655/75	1.25X1.5-D
R79-115-2229	SHAFT	3755 S	COMMON
R79-115-2238	SHAFT	3755/3655 S	COMMON
R79-116-2210	SHAFT	3755
R79-116-2229	SHAFT	3755 M
R79-186-2229	SHAFT	3189
R79-186-2238	SHAFT	3773DL(?)
R80-42-2249	SHAFT, DOUBLE-, EXTEN,GREASE	3405 S	COMMON
R8057-2-2229	BALL BEARING-CPLG END	3175	COMMON
R8057-3-0429	BALL BEARING – THRUST	3316
R8057-3-0829	THRUST BEARING, DUPLEX STD. LTX	3406	10X12-17
R8057-3-1029	THRUST BEARING, DUPLEX STD	3196	3X4-13
R8057-3-1221	BALL BRG-THRST, (GROUND FACE)	3700 M
R8057-3-1229	BALL BRG-SET, (DOUBLE)	3180 M
R8057-3-1301	THRUST BEARING	3175
R8057-3-1321	BALL BRG-CPLG END	3175
R8057-3-1329	STEEL BALL BRG-THRUST	3700	6X8-13A
R8057-3-1521	BEARING, BALL	3180
R8057-3-1721	BALL BRG-CPLG END	3175	COMMON
R81-81-2229	SHAFT	3138 S
R81-81-2238	SHAFT	3138 S
R8690-47166	OIL SEAL,, BRG HOUSING	3316 S	2X3-9
R90-219-1-2249	SHAFT W/KEY-LK NUT &, WASHER-(RH)	3460	L
R91588-01-2229	IMPELLER SCREW	3175
R91588-01-2232	IMPELLER SCREW	3175
R91588-01-2248	IMPELLER SCREW	3175 M	COMMON
R921591-2229	SHAFT W/KEY, NUT LEFT HAND	3450
R96-217-1101	SUCTION COVER, W/PLUG, & WEAR RING	3655	5X5-7
R96-237-1000	SUCTION COVER	3755	2.5X3-9
R96237-1203	SUCTION COVER	3655 M	2 1/2X3-9
R96-237-1203	SUCTION COVER, W/PLUG & WEAR	3655 M	2 1/2X3-9
R96-248-1000	SUCTION COVER, W/ WEAR RING	3755 M	1.5X2-9
R97-124-1000	SUCTION COVER, W/PLUG & WEAR RING	3655
R97-166-1130	SUCTION COVER, W/ WEAR RING	3655 M	6X6-9
R97-219-1101	SUCTION COVER W/PLUGS & W RING	3655	2X3-7
RB01015A-1104	SLEEVE NUT W O’RING	3410	6X8-14H
RB01015A-1203	SLEEVE NUT W/, SCREW & O’RING	3410	COMMON
RB01049A-1203	GLAND	3196	COMMON
RB01050A-1203	GLAND, PACKING	3196	COMMON
RB01144A	LANTERN RING	3410 L	COMMON
RB01466A-2229	MECH. SEAL SLEEVE	3316
RB01467A-2229	MECH. SEAL SLEEVE	3316
RB02006A-1104	SLEEVE NUT	3410
RB02008A-1104	NUT SLEEVE	3410 L	COMMON
RB02008A-1203	SLEEVE NUT W/ SET SCREW, & O’RING	3410	8X10-17
RB02024A01-1203	WEARING RING, CASE	3410	COMMON
RB02024A05-1203	WEAR RING,, CASE	3410	6X8-14M
RB02024A06-1203	WEARING RING, CASE	3410	10×12-12
RB02024A07-1203	WEAR RING, CASE	3410	4X6-13H
RB02024A08-1203	WEARING RING, CASE	3410	12X14-15XL
RB02291AA-1013	FRAME, GRS LUBE	3196	6″
RB03045A01-2446	LOCKNUT, IMPELLER (RADIAL)	3620
RB03045A02-2246	LOCKNUT, IMPELLER (THRUST)	3620
RB03046A01-2446	LOCKNUT, IMPELLER (RADIAL)	3620
RB03046A02-2446	LOCKNUT, IMPELLER (THRUST)	3620
RB03053A01-2446	LOCKNUT, IMPELLER (RADIAL)	3620
RB03053A02-2446	LOCKNUT, IMPELLER (THRUST)	3620
RB04093A-1203	SLEEVE NUT WITH SET, SCREW & O-RING	3410	COMMON
RB057-3-1521	BALL BEARING, SET	3185 L	8X10-16
RB10009-1203	IMPELLER W/TEFLON O-RING, 5 VANES (M.D. 10.00″)	3196	1X2-10
RB10009-1204	IMPELLER	3196	1X2-10
RB10009-1215	IMPELLER	3196	1X2-10
RB10009-1216	IMPELLER	3196	1X2-10
RB10009-1217	IMPELLER	3196	1X2-10
RB10156-1220	IMPELLER	3196 ST	1.5X3-6
RB10176-1203	IMPELLER	3196	2X3-6
RB10176-1204	IMPELLER	3196	2X3-6
RB10176-1216	IMPELLER, (MD: 6.0625″)	3196	2X3-6
RB10541-1013	IMPELLER W/O’RING 6 VANE, (MD: 13.00″)	3196	3X4-13
RB10542-1203	IMPELLER 6 VANE, (MD: 13.00″)	3196	3X4-13
RB10542-1204	IMPELLER, (6 VANE)	3196 MTX	3X4-13
RB10542-1216	IMPELLER, (6 VANE)	3196	3X4-13
RB10542-1601	IMPELLER 6 VANE, (MD: 13.00″)	3196	3X4-13
RB10588-1203	IMPELLER (6V)	3196 LTX	2X3-13
RB10588-1204	IMPELLER (6V)	3196 LTC	2X3-13
RB10588-1216	IMPELLER (6V)	3196 LTC	2X3-13
RB10592-1203	IMPELLER (6V), (MD: 13.00″)	3196	3X4-13
RB10592-1204	IMPELLER (6V)	3196 LTC	3X4-13
RB10592-1216	IMPELLER (6VANE)	3196	3X4-13
RC00010A-1220	IMPELLER (6V)	3196 MT	3X4-13
RC00130A-1220	IMPELLER, (MD 10.00″)	3196	2X3-10
RC00143A01-1013	IMPELLER	3196	3X4-7
RC00143A02-1203	IMPELLER	3196	3X4-7
RC00143A02-1204	IMPELLER	3196 MT	3X4-7
RC00143A02-1216	IMPELLER	3196 MT	3X4-7
RC002521A-1203	IMPELLER	3196 MT	4X6-10H
RC002521A-1216	IMPELLER	3196 MT	4X6-10H
RC002521A-1220	IMPELLER	3196 MT	4X6-10H
RC00262A02-1203	IMPELLER (M.D. 10.00″)	3196 MT	3X4-10H
RC00262A02-1204	IMPELLER W/O’RING, (MD: 10.00″)	3196	3X4-10H
RC00262A02-1216	IMPELLER	3196 MT	3X4-10H
RC00302A-1203	SHAFT SLEEVE, W/ O’RING	3420	20X24-28
RC01182A-2229	SHAFT, FOR, DBL THRUST BRG	3196 MT	COMMON
RC01182A-2238	SHAFT, FOR, DBL THRUST BRG	3196 MT	COMMON
RC01210A01-1216	STUFFING BOX COVER, 1 HOLE DYN. SEAL	3196	8″
RC01213A02-1245	REPELLER, W/O-RING	3175	8X10-18
RC01222A-6929	IMPELLER	3196 NM	1X1.5-6
RC01298A-1203	GLAND PACKED, BOX	3196	3410 M
RC01305A-1203	GLAND,STUFFBOX, PLAIN TYPE	3316	COMMON
RC01306A-1203	GLAND,STUFFING, BOX	3316	COMMON
RC01307A-1203	GLAND,STUFFING, BOX	3316-3405	COMMON
RC01341A-6929	IMPELLER	3196 NM	2X3-6
RC01356A01-1203	BIG BORE, S.B COVER	3196 ST	6″
RC01357A01-1203	STUFF. BOX CVR, BIG BORE	3196 STX	8″
RC01382829-1220	S.B. COVER, *TAPER*	3196 MT	4X3-13
RC01382A13-1204	TAPOR BORE, SEAL CHAMBER	3196 MTX	8″
RC01382A19-1203	TAPER BORE, SEAL CHAMBER	3196 MTX	10″
RC01382A25-1204	TAPER BORE, SEAL CHAMBER	3196 MTX	13″
RC01400A-1203	GLAND ASSY., BIG/TAPER BORE, DURA MECH. SEAL	3196	15″
RC02474A-1203	STUFFING BOX, GLAND	3410	COMMON
RC02475A-1203	STUFFING BOX, GLAND	3410	COMMON
RC02475A-1203	STUFFING BOX, GLAND	3410	COMMON
RC0247A-1203	STUFFING BOX, GLAND	3410	10X12-17
RC02521A-1203	IMPELLER	3196 MT	4X6-10H
RC02521A-1204	IMPELLER	3196 MT	4X6-10H
RC02584A05-2156	SHAFT ASSY #05	3171NM	1.5X3-8
RC02584A05-2216	SHAFT ASSY W/BRG LKNUT,, BRG LKWSHR,	3171NM
RC02610A03-1203	GLAND, ASSY F,V & D, DIST. KIT	3410	8X10-12
RC03044A-2229	SHAFT, WITH SLV DESIGN	3196	COMMON
RC03044A-2230	SHAFT, WITH SLV DESIGN	3196	3X4-13
RC03044A-2238	SHAFT (SLEEVE, REQUIRED)	3196 LTX	COMMON
RC0304A-2238	SHAFT	3196 XLT	COMMON
RC03162A-1203	GLAND HALF	3180	COMMON
RC03176A-1203	GLAND HALF, DYN. SEAL PACK BOX	3180	COMMON
RC03238A-2249	SHAFT	3180	COMMON
RC03239A-2249	SHAFT	3180	COMMON
RC03239A-2255	SHAFT	3180	COMMON
RC03247A-1203	GLAND	3180	COMMON
RC03351A-2229	SHAFT W/SLEEVE, DESIGN	3196	COMMON
RC03351A-2238	SHAFT	3196 X17	COMMON
RC03355A-1203	GLAND	3196	COMMON
RC03356A-1203	GLAND, (NON MACH)	3175	COMMON
RC03357A-1203	GLAND, (NON MACH)	3175	COMMON
RC03358A-1203	GLAND-PCKD BOX, (NON MACHINE)	3175	COMMON
RC04045A-1012	STUFFING BOX COVER, SEAL CHAMBER TAPER BORE+	3796	1.5X1.5-8
RC04048A-1012	SEAL CHAMBER, TABER BORE PLUS	3196	10″
RC04052A-1012	STUFFING BOX COVER,, TAPER BORE PLUS	3196	13″
RC04057A01-1203	STUFFING BOX COVER,, BIG BORE	3196	8″
RC04059A01-1012	SEAL CHAMBER, BIG BORE	3196 MTX	10″
RC04060A01-1203	STUFFING BOX COVER, SEAL CHAMBER BIG BORE	3196	13″
RC04060A02-1012	STUFFING BOX, BIG BORE	3196	13″
RC04063A01-1203	STUFFING BOX COVER,, TAPER BORE PLUS	3196	13″
RC04064A01-1203	STUFFING BOX COVER, SEAL CHAMBER BIG BORE	3196	15″
RC04088A02-1203	REPELLER, W/O-RING	3175	18″
RC04089A02-1203	REPELLER	3175 L	22″
RC04107A01-1203	STUFFING BOX COVER, TAPER BORE PLUS	3196 LF	4″
RC04107A01-1204	SEAL CHAMBER, TAPER BORE, PLUS	3196	2X3-6
RC04108A01-1203	STUFFING BOX COVER, TAPER BORE PLUS	3196	8″
RC04108A01-1216	STUFFING BOX COVER, TAPER BORE PLUS	3196	8″
RC04110A01-1203	STUFF BOX COVER, TAPER BORE PLUS	3196	10″
RC04110A01-1216	STUFFING BOX COVER, TAPER BORE	3196	10″
RC04111A01-1203	STUFFING BOX COVER, TAPERBORE PLUS	3196	13″
RC04111A01-1216	STUFF BOX COVER, TAPERBORE PLUS	3196 MTX	13″
RC04114A01-1203	STUFFING BOX COVER, TAPER BORE PLUS	3196	13″
RC04114A01-1216	STUFFING BOX COVER, TAPER BORE PLUS	3196	13″
RC04115A01-1203	STUFFING BOX COVER, TAPER BORE +	3196	13″
RC04116A01-1203	SEAL CHAMBER, TAPER BORE	3196X	6X8-15
RC04371A19-1203	STUFFING BOX, BIG BORE	3996	4X6-13
RC04372A19-1203	STUFFING BOX, TAPER BORE	3996	4X6-13
RD00458A01-2229	SHAFT ASSY	3700 M
RD00458A01-2238	SHAFT	3700
RD00495A02-1203	STUFFING BOX COVER, DYN. SEAL	3196	10″
RD00495A02-1216	STUFFING BOX COVER, DYN. SEAL	3196	10″
RD00496A02-1203	STUFFING BOX COVER, DYN. SEAL	3196	13″ MT
RD00496A02-1216	STUFFING BOX COVER, DYN. SEAL	3196	13″
RD00608A-1003	CASING	3175 S	6X8-12
RD00698A03-1203	STUFF.BOX COV-, DYNAMIC SEAL	3175 L	22″
RD01078A01-1203	STUFF.BOX COV., DYNAMIC SEAL	3175 S	6X8-14
RD01080A-1203	STUFFING BOX, COVER	3175	12″
RD01080A-1209	STUFFING BOX, COVER	3175	12″
RD01080A-1216	STUFFING BOX, COVER	3175	12″
RD01133A01-2217	SHAFT ASSEMBLY	3700	3X4-16L
RD01133A01-2229	SHAFT ASSEMBLY	3700 L	4X6-16N
RD01133A01-2230	SHAFT ASSEMBLY	3700	3X4-16L
RD01133A01-2238	SHAFT ASSEMBLY	3700 L	4X6-16N
RD01322A-1003	STUFFING BOX, COVER	3175 S	12″
RD02311A03-1203	S.B. COVER, 1-, HOLE DYN. SEAL	3175 M	18″
RD02311A05-1203	S.B. COVER, 1-HOLE DYN. SEAL	3175	18″
RD02311A06-1000	S.B. COVER, 1-HOLE DYN. SEAL	3175	18″
RD02315A01-1203	STUFFING BOX COVER, DYN. SEAL	3196	15″
RD02319A-6929	CASING	3196 NM	1X1.5-6
RD02320A-6929	CASING	3196 NM	1.5X3-6
RD02321A-6929	CASING	3196 NM	2X3-6
RD02443A01-1203	STUFFING BOX COVER, (BIG BORE)	3196	1.5X3-13
RD02444A01-1204	BIG BORE SEAL, CHAMBER	3196 MTX	8″
RD02472A01-2223	SHAFT ASSY FOR, SLEEVE CONSTRUCTION	3410	4X6-13
RD02472A01-2229	SHAFT	3410
RD02472A01-2238	SHAFT	3410
RD02479A01-1203	BIG BORE SEAL, CHAMBER	3196 MT	10″
RD02479A01-1204	BIG BORE SEAL, CHAMBER	3196 MTX	10″
RD02480A01-1203	BIG BORE SEAL, CHAMBER	3196	13″
RD02480A01-1204	BIG BORE SEAL, CHAMBER	3196 MTX	13″
RD02482A01-1203	S.B. COVER -, BIG BORE	3196 XLT	8X10-13
RD02490A01-1013	IMPELLER 5 VANE (M.D. 13.25″), (NEW STYLE)	3196	8X10-13
RD02490A02-1203	IMPELLER 5 VANE (M.D. 13.25″), (NEW STYLE)	3196	8X10-13
RD02490A02-1216	IMPELLER W/O’RING, 5 VANE, (MD: 13.25″)	3196	8X10-13
RD02490A03-1220	IMPELLER W/O’RING 5VANE, (MD: 13.25″)	3196	8X10-13
RD02618A01-2229	SHAFT ASSEMBLY, FOR SLEEVE CONSTRUCTION	3410	COMMON
RD02618A01-2238	SHAFT ASSEMBLY	3410	COMMON
RD02641A-1000	HOUSING, BRG, THRUST W/BRG	3410	12X14-15XL
RD02717A01-2229	SHAFT,ASY FOR, WITH SLV CSTR	3410 XL	COMMON
RD02717A01-2238	SHAFT,ASSY FOR, WITH SLV CSTR	3410 XL	COMMON
RD02747A01-2229	SHAFT	3410	COMMON
RD02747A01-2238	SHAFT ASSEMBLY	3410	COMMON
RD03002A01-2229	SHAFT ASSY RH ROT., (RING OIL BALL BRG)	3420	20X24-28
RD03012A01-2229	SHAFT SA-RH, STRAIGHT	3420 S	18X20-24
RD04539AA-1013	FRAME	3196	COMMON
RD04540AA-1001	FRAME W/SIGHT GLASS, (OIL LUBE)	3196	COMMON
RD04540AB-1001	BRG FRAME, WITH PLUGS	3196	1.5X3-10
RD04548AA-1001	FRAME, (OIL LUBE)	3196	COMMON
RD04560A01-1013	FRAME ADAPTER	3196	COMMON
RD04573A01-1203	STUFFING BOX COVER, (FITS SIZES 16H AND 17)	3196	17″
RD04573A01-1209	STUFFING BOX COVER	3196 X	17″ COMMON
RD04573A01-1216	STUFFING BOX COVER	3196	COMMON
RD04573A01-1233	STUFFING BOX, COVER	3196 X17	17″
RD04573A01-1605	STUFFING BOX COVER	3196	COMMON
RD04573A02-1012	STUFFING BOX COVER, (FITS SIZES 16H AND 17)	3196	17″
RD04573A03-1220	STUFFING BOX COVER	3196	4X6-17
RD04859A-2249	SHAFT	3180	COMMON
RD04875A-2249	SHAFT	3180 L	COMMON
RD04875A-2255	SHAFT	3180	COMMON
RD06607A01-2156	SHAFT ASSY	3700	1X2-11AS
RD06607A01-2229	SHAFT ASSY	3700 S	COMMON
RD06608A01-2238	SHAFT ASSY, LOCKWASHER, AND KEYS	3700	COMMON
RD06608A01-2238NS	SHAFT ASSY,NON MACHINED, COUPLING END	3700	COMMON
RD06608A01-2255	SHAFT ASSY	3700	COMMON
RD06609A01-1203	SHAFT ASSEMBLY	3700 L	4X6-19N
RD06609A01-2229	SHAFT ASSEMBLY	3700	COMMON
RD06767A01-1203	STUFFING BOX COVER, NON-JCKT/BIG BORE	3196	8X10-17
RD06767A01-1216	STUFFING BOX COVER,, BIG BORE	3196	17″
RD06848A-1203	SEAL CHAMER, BIG BORE/JACK.	3196 XLT	13″
RD08986A-2238	SHAFT	3620
RDO4573A03-1605	STUFFING BOX COVER	3196	4X6-17
RE00666AA-1001	FRAME-, OIL LUBE	3196 XLTX	COMMON
SUB PUMP-A01	15HP MOTOR, 1750 RPM	9TNHC
WS2012BHF	SUBMERSIBLE SEWAGE PUMP	3887	2 HP
XD00247A02-1203	CASING	3196	3X4-7
Z00056E	PACKING	JC	3X4-14
Z196-BFM2	PACKING KIT	3196
Z196-BFS2	PACKING KIT	3196
Z55747G000-1002	GLAND, SUB-ASSEMBLY	HS
GOULDS 10L17	MECH. SEAL,, (SHAFT @ 5/8″)	4S VBK10-SSV	VERTICAL
GOUR77-55-2229	SHAFT, SINGLE, EXTEN,GREASE	3405 S	COMMON
LNE 3544-4567-1	LABYRINTH SEAL
LPE 1375-2125-B46	LABYRINTH SEAL	3410
P/N RB 10009-1203	316 SS IMP, FULL DIA. 10″	3796 MTX	2X2-10
PATTERN DLA#1	SUCTION COVER, 048928G000-1245	JC	2X3-8
R196-MKX13	MAINT. KIT	3196 XLT-X	6X8-13
RB02024A06-1203	WEARING RING, CASE	3410	10X12-12L
RB02024A08-1203	WEARING RING, CASE	3410	12X14-15XL