Goulds 3196 XLTX Replacement Pumps & Parts
ACCA Pumps manufactures private-label complete pumps, pump ends and aftermarket replacement parts for supported Goulds 3196 XLTX configurations. For these larger process-pump duties, ACCA verifies the full pump size, hydraulic duty, power-end arrangement, materials and sealing configuration before confirming the replacement scope.
Complete 3196 XLTX Pumps and Replacement Components
Complete XLTX Pumps
Private-label ANSI process pumps for supported XLTX installations, selected from the required flow, head, metallurgy and sealing arrangement.
Wet Ends
Casings, open impellers, covers, seal chambers and related process-end components for supported extra-large-frame configurations.
XLTX Power Ends
Frames, shafts, sleeves, bearing housings, bearings and rotating components for supported XLTX arrangements.
Individual Parts
Aftermarket components identified from the installed size, frame, OEM reference, casting information, dimensions and material specification.
XLTX Identification & Engineering Review
XLTX is the extra-large 3196 frame family. Larger hydraulic duties make correct identification especially important. ANSI dimensional conventions alone are not sufficient to establish internal-part interchangeability, so ACCA verifies the installed configuration before quoting.
| Required Information | Examples | Used To Verify |
|---|---|---|
| Complete pump size | Suction × discharge × nominal impeller designation | Hydraulic configuration and casing family |
| Frame / power end | XLTX nameplate or documented frame data | Shaft, bearings, housing and rotating components |
| Operating duty | Flow, TDH, speed, temperature, specific gravity | Complete-pump selection and hydraulic review |
| Wetted materials | Casing, impeller, sleeve and cover metallurgy | Material compatibility |
| Seal arrangement | Seal chamber, stuffing box and mechanical-seal details | Cover and sealing configuration |
| Existing reference | Part number, casting number, drawing or dimensions | Individual-part cross-reference |
3196 XLTX Hydraulic Sizes & ANSI Designations
Published ANSI B73.1M reference data for the equivalent extra-large-frame platform identifies the following hydraulic sizes. ACCA uses this as an engineering identification aid and verifies the installed Goulds 3196 configuration before quoting.
| 3196 Size | ANSI Designation | Discharge | Suction |
|---|---|---|---|
| 6 × 8-13 | A90 | 6 in | 8 in |
| 8 × 10-13 | A100 | 8 in | 10 in |
| 6 × 8-15 | A110 | 6 in | 6 in |
| 8 × 10-15 | A120 | 8 in | 10 in |
| 8 × 10-15G | A120 | 8 in | 10 in |
| 8 × 10-16H | Verify configuration | 8 in | 10 in |
| 4 × 6-17 | Verify configuration | 4 in | 6 in |
| 6 × 8-17 | Verify configuration | 6 in | 8 in |
| 8 × 10-17 | Verify configuration | 8 in | 10 in |
ACCA’s existing Goulds parts database already includes 3196 references for XLTX-size casings, impellers, wear plates and complete bare-pump configurations, including 6 × 8-13, 8 × 10-13, 6 × 8-15, 8 × 10-15/15G and 17-inch hydraulics. Use the Goulds Parts Cross Reference or send the existing part number with the RFQ.
3196 XLTX Replacement Parts
Casings
Process casings selected by pump size, pressure requirement and specified metallurgy.
Open Impellers
Replacement impellers matched to the hydraulic size, trim requirements and material specification.
Shafts & Sleeves
XLTX rotating components identified from frame, shaft arrangement and existing references.
Seal Chambers & Covers
Process covers and sealing components matched to the installed seal arrangement.
Frames & Bearing Housings
Power-end components for supported XLTX maintenance and rebuild requirements.
Bearings & Maintenance Parts
Bearings, gaskets and related maintenance components identified for the specific configuration.
Materials for XLTX Process Service
Depending on the documented pump configuration and service, ACCA can review common process-pump materials and specialty alloys. Send liquid composition, temperature, solids content where applicable, flow, head, speed and the existing material specification. Final metallurgy and availability are confirmed at quotation.
Complete 3196 Frame Family
3196 STX
Small-frame complete pumps and replacement parts.
3196 MTX
Medium-frame pump, wet-end and power-end coverage.
3196 LTX
Large-frame complete pumps and aftermarket components.
3196 Pumps & Parts Hub
Frame navigation, complete-pump program and engineering resources.
Related Engineering Resources
Goulds Pump Parts Reference · Centrifugal Pump Impeller Guide · Goulds Pumps & Parts · Centrifugal Pump Parts
Request Goulds 3196 XLTX Pumps or Parts
Send the pump size, frame, serial number, duty point, materials, required component, quantity and photographs or drawings when available.
Trademark Disclaimer: Goulds and 3196 are trademarks or model references of their respective owner. Manufacturer names and model references are used solely for identification and compatibility-reference purposes. ACCA Pumps is an independent aftermarket manufacturer and is not affiliated with or endorsed by the trademark owner.